BAFANG DP C10.CAN Bedienungsanleitung
C10.CAN C15.CAN E10.CAN
LOVE AT FIRST RIDE
DISPLAY MANUALS
BIM A S BIKES
1
BF-DM-C-DP C10-EN November 2019
DEALER MANUAL FOR DISPLAY
CONTENT
DP C10.CAN
7.1 Important Notice
7.2 Introduction of Display
7.3 Product Description 3
7.3.1 Specifications 3
3
4
5
6
7.3.2 Functions Overview
7.4 Display Installation
7.5 Display
7.6 Key Definition
7.7 Normal Operation 6
7.7.1 Switching the System ON/OFF 6
7.7.2 Selection of Support Levels 6
7.7.3 Selection mode 7
7.7.4 Headlights / backlighting 7
7.7.5 Walk Assistance 8
7.7.6 Battery capacity indication 8
7.7.7 USB charge function 8
7.8 Settings 9
7.8.1 Setting 9
7.8.2 View Information 11
7.9 Error Code Definition 15
7 DEALER MANUAL FOR DP
2
0
20
DP C15.CAN
7.1 Important Notice
7.2 Introduction of Display
7.3 Product Description 21
7.3.1 Specifications
21
21
22
23
7.3.2 Functions Overview
7.4 Display Installation
7.5 Display
7.6 Normal Operation 23
7.6.1 Switching the System ON/OFF 23
23
24
24
24
7.6.2 Selection of Support Levels
7.6.3 Headlights / backlighting
7.6.4 Walk Assistance
7.6.5 Selection Mode
7.6.6 SERVICE 24
7.7 Settings 25
7.7.1 "Display Setting" 25
26
7.7.2 "Information"
7.8 Error Code Definition 29
34
34
DP E10.CAN
7.1 Important Notice
7.2 Introduction of Display
7.3 Product Description 35
7.3.1 Specifications 35
35
35
36
7.3.2 Functions Overview
7.4 Display Installation
7.5 Display
7.6 Key Definition 36
7.7 Normal Operation 37
37
37
37
37
38
7.7.1 Switching the System ON/OFF
7.7.2 Selection of Support Levels
7.7.3 Headlights / backlighting
7.7.4 Walk Assistance
7.7.5 Battery Capacity Indication
7.7.6 USB Charge Function 38
7.8 Error Code Definition 39
C10.CAN C15.CAN E10.CAN
2BF-DM-C-DP C10-EN November 2019
7.2 INTRODUCTION OF DISPLAY
• Model: DP C10.CAN BUS
• The housing material is PC and Acrylic, and
the button material is made of silicone.
• The label marking is as follows:
Note: Please keep the QR code label attached
to the display cable. The information from the
Label is used for a later possible software
update.
7.1 IMPORTANT NOTICE
• If the error information from the display
cannot be corrected according to the inst-
ructions, please contact your retailer.
• The product is designed to be waterproof. It
is highly recommended to avoid submerging
the display under water.
• Do not clean the display with a steam jet,
high-pressure cleaner or water hose.
• Please use this product with care.
• Do not use thinners or other solvents to
clean the display. Such substances can
damage the surfaces.
• Warranty is not included due to wear and
normal use and aging.
3
BF-DM-C-DP C10-EN November 2019
DEALER MANUAL FOR DISPLAY
7.3 PRODUCT DESCRIPTION
7.3.1 Specifications
• Operating temperature: -20℃~45℃
• Storage temperature: -20℃~50℃
• Waterproof: IP65
• Bearing humidity: 30%-70% RH
7.3.2 Functional Overview
• Speed display (including speed in real time
(SPEED), top speed (MAXS) and average
speed (AVG), switching between km and
miles)
• Switching between km and miles
• Battery capacity indicator
• Automatic sensors explanation of the light-
ing system
• Brightness setting for backlight
• Indication of performance support
• Walk assistance
• Kilometer stand (including single-trip dis-
tance, total distance)
• Display for the remaining distance.(Depends
on your riding style)
• Motor output power indicator
• Energy consumption indicator CALORIES
(Note: If the display has this function)
• Error messages view
• Service
• USB charge function
4BF-DM-C-DP C10-EN November 2019
7.4 DISPLAY INSTALLATION
1. Open the clamps of display and insert
the rubber rings A on the handlebar.
(it is suitable for handlebar ∮22.2 or
∮31.8)
2. Now place the display on to the handlebar
in the correct position, with two M4*8
screws (C), tighten the display (B the
clamps) into position. Torque requirement:
1N.m.
3. Open the clamp (D) on the controller pad
and place it in the correct position (it is
suitable for handlebar: ∮22.2).
4. Using a M3*10 screw (E) tighten the
controller pad onto the handlebar. Torque
requirement: 1N.m.
5. Please link the display to the EB-BUS cable.
h:The male connector from display.
H: The female connector from EB-BUS.
5
BF-DM-C-DP C10-EN November 2019
DEALER MANUAL FOR DISPLAY
7.5 DISPLAY
111
12
13
15
14
16
3
10
9
6
4
7
8
2
5
1Display of battery capacity in real time.
2Menu.
3Service: please see the service section.
4Digital speed display.
5Speed mode , top speed (MAXS) - Average
speed (AVG).
6Kilometer stand, Daily kilometers (TRIP) -
Total kilometers (TOTAL).
7Data: Display data, which corresponds to the
current mode.
8Walking assistance .
9USB charging indicator displays the icon ,
if an external USB device is connected to the
display.
10 The display shows this symbol, if the
light is on.
11 Error indicator .
12 Error code indicator.
13 Speed unit.
14 Unit indicator.
15 Remaining distance (RANGE).
16 Support level
6BF-DM-C-DP C10-EN November 2019
7.6 KEY DEFINITION
Light On/Off
System On/Off
OK/Enter
Up
Down
7.7 NORMAL OPERATION
7.7.1 Switching the System ON/OFF
Press and hold (>2S) on the display to turn on the system. Press and hold (>2S) again to
turn off the system.
If the "automatic shutdown time" is set to 5 minutes (it can be set with the "Auto Off" function, See
"Auto Off"), the display will automatically be turned off within the desired time when it is not in
operation.
7.7.2 Selection of Support Levels
When the display is turned on, press (<0.5S) the or button to switch to the support level, the
lowest level is 1, the highest level is 5. When the system is switched on, the support level starts in
level 1. There is no support at level null.
7
BF-DM-C-DP C10-EN November 2019
DEALER MANUAL FOR DISPLAY
7.7.3 Selection mode
Briefly press (<0.5s) the button to see the different trip modes. Trip: daily kilometers (TRIP) - to-
tal kilometers (TOTAL) - Maximum speed (MAXS) - Average speed (AVG) - Remaining distance
(RANGE) - Output power (W) - Energy consumption (C (only with torque sensor fitted)).
7.7.4 Headlights / backlighting
Hold (>2S) the button to activate the headlight and taillights.
Hold (>2S) the button again to turn off the headlight. The brightness of the backlight can be
set in the display settings "Brightness". (If the display /Pedelec is switched on in a dark environment,
the display backlight/headlight will automatically be switched on. If the display backlight/headlight
has been manually switched off, the automatic sensor function is deactivated. You can only turn on
the light manually after switching on the system again.)
8BF-DM-C-DP C10-EN November 2019
7.7.5 Walk Assistance
The Walk assistance can only be activated
with a standing pedelec.
Activation: Briefly press (<0.5S) the
button until to level null, and then press
(<0.5s) the button, the symbol is
displayed. Now hold down the button
and the Walk assistance will activate. The
symbol will flashes and the pedelec
moves approx. 6 km/h. After releasing the
button, the motor stops automatically and
switches back to level null (if no any option
be activated in 5 second). If no speed signal
is detected, it shows 2.5km/h.
7.7.6 Battery capacity indication
The battery capacity is showed in ten bars.
Each full bar represents a remaining capacity
of the battery in a percentage, if the frame
of indicator blinks that means to charge. (as
shown in the figure below):
Bars Charge in Percentage
10 ≥90%
9 80%≤C<90%
8 70%≤C<80%
7 60%≤C<70%
6 50%≤C<60%
5 40%≤C<50%
4 30%≤C<40%
3 20%≤C<30%
2 10%≤C<20%
1 5%≤C<10%
Blinking C<5%
7.7.7 USB charge function
If an external USB device is connected to the
display, the icon appears, the device will
be charged. The maximum charging voltage
is 5V and the maximum charging current is
500mA.
9
BF-DM-C-DP C10-EN November 2019
DEALER MANUAL FOR DISPLAY
7.8 SETTINGS
After the display is turned on, quickly press
(<0.3S) the button twice to access the
“MENU” interface. pressing the or
button, you can select and reset the options.
Then press (<0.3S) the button twice to
confirm your selected option and to return
to the main screen. If no button is pressed
within 10 seconds in “MENU” interface, the
display will automatically return to the main
screen and no data will be saved.
7.8.1 Setting
7.8.1.1 Reset mileage
When the system is on, quickly press
(<0.3S) the button twice to access the
“MENU” interface and “tC” appears on the
display (as shown below). Now using the
or button, choose between “y”(YES) or
“n”(NO). If choose “y”, the Daily kilometers
(TRIP), Maximum speed (MAX) and Average
speed (AVG) will be reset.
Once you have chosen your desired selec-
tion, press (<0.3S) the button twice to
save and return to the main screen, or you
can press (<0.3S) the button once to
save and enter next item "Selection of unit
in km/Miles".
NOTE: If the daily kilometers accumulate
99999km, the daily kilometers will be reset
automatically.
7.8.1.2 Selection of unit in km/Miles
When the system is on, quickly press
(<0.3S) the button twice to access
the “MENU” interface, repetitively press the
button until the “S7” appears on the
display (as shown below). Now using the
or button, choose between “km/h”
or “mile/h”.
Once you have chosen your desired selec-
tion, press (<0.3S) the button twice
to save and return to the main screen,
or you can press (<0.3S) the button
once to save and enter next item "Set light
sensitivity".
7.8.1.3 Set light sensitivity
When the system is on, quickly press
(<0.3S) the button twice to access
the “MENU” interface, repetitively press
the button until the “bL0” appears
on the display (as shown below). And then
press to increase or to reduce (light
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere BAFANG Fahrradzubehör Handbücher
BAFANG
BAFANG DP C10.UART Bedienungsanleitung
BAFANG
BAFANG DP E08.CAN Bedienungsanleitung
BAFANG
BAFANG DP C181.CAN Bedienungsanleitung
BAFANG
BAFANG MM G333.250.C Bedienungsanleitung
BAFANG
BAFANG M510 Bedienungsanleitung
BAFANG
BAFANG DP C18.CAN Bedienungsanleitung
BAFANG
BAFANG DP C240.CAN Bedienungsanleitung
BAFANG
BAFANG DP C18.UART Bedienungsanleitung
BAFANG
BAFANG BT C01.340.UART Bedienungsanleitung
BAFANG
BAFANG H550 Bedienungsanleitung
BAFANG
BAFANG UB40 Bedienungsanleitung
BAFANG
BAFANG DP C230.CAN Bedienungsanleitung
BAFANG
BAFANG DP C15.CAN Bedienungsanleitung
BAFANG
BAFANG CR A101.C 1.0 Bedienungsanleitung
BAFANG
BAFANG M800 Bedienungsanleitung
BAFANG
BAFANG DP C171.UART Bedienungsanleitung
BAFANG
BAFANG DP C01.RS 232.7 Bedienungsanleitung
BAFANG
BAFANG C965 Bedienungsanleitung
BAFANG
BAFANG H500F Bedienungsanleitung
BAFANG
BAFANG DP C18.UART Bedienungsanleitung
Beliebte Fahrradzubehör Handbücher anderer Marken
Sigma
Sigma BC 16.16 Bedienungsanleitung
Playcore
Playcore Dero Setbacks Bedienungsanleitung
VDO Cyclecomputing
VDO Cyclecomputing x3dw Bedienungsanleitung
Cateye
Cateye RAPID X2 Bedienungsanleitung
buratti meccanica
buratti meccanica Clorofilla Trail Bedienungsanleitung
Shimano
Shimano SG-8R20 Betriebsanleitung
