Balluff BNI IOL-101-000-K018 Bedienungsanleitung

BNI IOL-101-000-K018

BNI IOL-102-000-K019

BNI IOL-101-S01-K018

BNI IOL-102-S01-K019

User’s Guide

Balluff Network Interface / IO-Link Sensor hub M8 BNI IOL-101…K018 / BNI IOL-102…K019

1 Notes for the user

1.1

About this guide

1.2

Structure of the guide

1.3

Typographical conventions

1.3.1

Enumerations

1.3.2

Actions

1.3.3

Syntax

1.3.4

Cross references

1.4

Symbols

1.5

Abbreviations

2 Safety

2.1

Intended use

2.2

General safety notes

2.3

Meaning of the warnings

3 Getting started

3.1

Connection overview 8 port module

3.2

Connection overview 4 port module

3.3

Mechanical connection

3.4

Electrical connection

3.4.1

IO-Link interface

3.4.2

Sensor interface

4 IO-Link interface

4.1

IO-Link data

4.2

Process data / Input data

4.3

Process data / Output data

4.4

Parameter data / Request data

4.5

Errors

4.6

Events

5 Technical data

5.1

Dimensions

5.2

Mechanical data

5.3

Electrical data

5.4

Operating conditions

5.5

LED indicators

Appendix

Product ordering code

Order information

Scope of delivery

Balluff Network Interface / IO-Link Sensor hub M8 BNI IOL-101…K018 / BNI IOL-102…K019

www.balluff.com 2

1Notes for the user

1.1 About this guide

This guide describes the Balluff IO-Link sensor collector module, also called Sensor hub.

Connection to the host interface master is made through the IO-Link protocol. Functionally

this compact, cost-effective module is comparable with a passive splitter box: It takes

conventional sensor signals and passes them over the IO-Link interface.

1.2 Structure of the

guide

The guide is organized so that the sections build on one another.

Section 2: Basic safety information.

Section 3: The main steps for installing the device.

Section 4: IO-Link, parameter and process data for the device.

Section 5: Technical data for the device.

…

1.3 Typographical

conventions

The following typographical conventions are used in this guide.

1.3.1 Enumerations

Enumerations are shown in list form with bullet points:

- Entry 1,

- Entry 2.

1.3.2 Actions

Action instructions are indicated by a preceding triangle. The result of an action is indicated

by an arrow.

Action instruction 1.

Action result.

Action instruction 2.

1.3.3 Syntax



Numbers:

Decimal numbers are shown without additional indicators (e.g. 123),

Hexadecimal numbers are shown with the additional indicator hex (e.g. 00hex).

1.3.4 Cross references

Cross references indicate where additional information on the topic can be found (see

section 5 „Technical data”).

1.4 Symbols

Note, tip:

This symbol indicates general notes.

Caution!

This symbol indicates a security notice which must be considered.

1.5 Abbreviations

BNI Balluff Network Interface

I port Standard input port

DPP Direct parameter page

IOL IO-Link

EMCElectromagnetic compatibility

FE Function earth

SPDU Service Protocol Data Unit

Balluff Network Interface / IO-Link Sensor hub M8 BNI IOL-101…K018 / BNI IOL-102…K019

www.balluff.com

2Safety

2.1 Intended use

This guide describes the Balluff IO-Link sensor collector module, also called Sensor Hub.

Connection to the host interface master is made through the IO-Link protocol. Functionally

this compact, cost-effective module is comparable with a passive splitter box: It takes

conventional sensor signals and passes them over the IO-Link interface.

2.2 Installation and

startup

Note

Installation and startup are to be performed only by trained specialists. Qualified

personnel are persons who are familiar with the installation and operation of the

product, and who fulfills the qualifications required for this activity. Any damage

resulting from unauthorized manipulation or improper use voids the

manufacturer's guarantee and warranty. The Operator is responsible for

ensuring that applicable of safety and accident prevention regulations are

complied with.

2.3 General safety

instructions

Commissioning and inspection

The operating company shall be responsible for observance of locally applicable safety

instructions.

Before commissioning, carefully read the operating manual.

The system must not be used in applications in which the safety of persons is dependent on

the function of the device.

Authorized Personnel

Installation and commissioning may only be performed by trained specialist personnel.

Intended use

Warranty and liability claims against the manufacturer are rendered void by:

Unauthorized tampering

Improper use

Use, installation or handling contrary to the instructions provided in this operating

manual

Obligations of the Operating Company

The device is a piece of equipment from EMC Class A. Such equipment may generate RF

noise. The operator must take appropriate precautionary measures. The device may only be

used with an approved power supply. Only approved cables may be used.

Malfunctions

In the event of defects and device malfunctions that cannot be rectified, the device must be

taken out of operation and protected against unauthorized use.

Hazardous

voltage

Note

Disconnect all power before servicing equipment.

Note

In the interest of product improvement, the Balluff GmbH reserves the right to

change the specifications of the product and the contents of this manual at any

time without notice.

Balluff Network Interface / IO-Link Sensor hub M8 BNI IOL-101…K018 / BNI IOL-102…K019

www.balluff.com 4

3 Getting started

3.1 Connection

overview

8 port module

Figure 3-1: BNI IOL-102-000-K019 / BNI IOL-102-S01-K019

1 IO-Link interface

2 Mounting hole

3 Status LED: Communication / module

4 Standard input port 1

5 Standard input port 3

6 Standard input port 5

7 Standard input port 7

8 Mounting hole

9 Port LED: Standard input port 7, Pin 4

10 Standard input port 6

11 Standard input port 4

12 Standard input port 2

13 Label

14 Standard input port 0

Balluff Network Interface / IO-Link Sensor hub M8 BNI IOL-101…K018 / BNI IOL-102…K019

www.balluff.com

3Getting started

3.2 Connection

overview

4 port module

Figure 3-2: BNI IOL-101-000-K018 / BNI IOL-101-S01-K018

1 IO-Link interface

2 Mounting hole

3 Status LED: Communication / module

4 Standard input port 1

5 Standard input port 3

6 Mounting hole

7 Port LED: Standard input port 3 Pin 4

8 Standard input port 2

9 Label

10 Standard input port 0

Balluff Network Interface / IO-Link Sensor hub M8 BNI IOL-101…K018 / BNI IOL-102…K019

www.balluff.com 6

3 Getting started

3.3 Mechanical

connection

The BNI IOL … modules are attached by using 2 M4 screws and 2 spacers.

3.4 Electrical

connection

The sensor hub modules require no separate supply voltage connection. Power is provided

through the IO-Link interface by the host IO-Link master.

3.4.1 IO-Link interface

IO-Link (M12, A-coded, male)

Requirement

Power supply controller, +24V, max 1.1A

GND

C/Q, IO-Link Data transmission channel

Connecting the

Sensor hub

Connection protection ground to FE terminal, if present.

Connect the incoming IO-Link line to the Sensor hub.

Note!

A standard 3 wire sensor cable is used for connection to the host IO-Link master.

Module versions

Sensor hub version

Digital I-port

BNI IOL-101-000-K018

BNI IOL-102-000-K019

BNI IOL-101-S01-K018

4 with single channel monitoring

BNI IOL-102-S01-K019

8 with single channel monitoring

3.4.2 Sensor-

Standard input port (M8, female)

interface

Requirement

+24V, 100mA

0 V, GND

Input

Note!

For the digital sensor inputs follow the input guideline per EN61131-2, type 2.

Note!

Unused I/O port socket must be fitted with cover caps to ensure IP67 protection

rating.

Balluff Network Interface / IO-Link Sensor hub M8 BNI IOL-101…K018 / BNI IOL-102…K019

www.balluff.com

4 IO-Link interface

4.1 IO-Link data

BNI IOL-101-000-K018 / BNI IOL-102-000-K019

Data transmission rate

COM2 (38,4 kBaud)

Frame type

2.1

Minimal cycle time

2.5 ms

Process data cycle time

2.5 ms, at minimal cycle time

Process data length

1 Byte

BNI IOL-101-S01-K018 / BNI IOL-102-S01-K019

Data transmission rate

COM2 (38,4 kBaud)

Frame type

2.2

Minimal cycle time

2.5 ms

Process data cycle time

2.5 ms, at minimal cycle time

Process data length

2 Bytes

4.2 Process data /

Output data

No output datas defined.

Balluff Network Interface / IO-Link Sensor hub M8 BNI IOL-101…K018 / BNI IOL-102…K019

www.balluff.com 8

4 IO-Link interface

4.3 Process data /

Input data

BNI IOL-101-000-K018

BNI IOL-101-000-K018, 4 binary inputs

Byte 0

Input 3.0

Input 2.0

Input 1.0

Input 0.0

BNI IOL-102-000-K019

BNI IOL-102-000-K019, 8 binary inputs

Byte 0

Input 7.0

Input 6.0

Input 5.0

Input 4.0

Input 3.0

Input 2.0

Input 1.0

Input 0.0

BNI IOL-101-S01-K018

BNI IOL-101-S01-K018, 4 binary inputs with single channel monitoring

Byte 0

Byte 1

Input 3.0

Input 2.0

Input 1.0

Input 0.0

Error 3.0

Error 2.0

Error 1.0

Error 0.0

BNI IOL-102-S01-K019

BNI IOL-102-S01-K019, 8 binary inputs with single channel monitoring

Byte 0

Byte 1

Input 7.0

Input 6.0

Input 5.0

Input 4.0

Input 3.0

Input 2.0

Input 1.0

Input 0.0

Error 7.0

Error 6.0

Error 5.0

Error 4.0

Error 3.0

Error 2.0

Error 1.0

Error 0.0

Signal port (x):

x.0: Pin 4,

Signal port (x):

x.0: Pin 4,

Signal port (x):

x.0: Pin 4,

Signal port (x):

x.0: Pin 4,

Balluff Network Interface / IO-Link Sensor hub M8 BNI IOL-101…K018 / BNI IOL-102…K019

www.balluff.com

4 IO-Link interface

4.4 Parameter data /

Request data

DPP

SPDU

Object name

Length

Range

Default value

Index

Sub-

Index

Identification Data

0x07

Vendor ID

2 Byte

read only

0x0378

0x08

0x09

Device ID

3 Byte

0x050108

0x05010A

0x050104

0x050106

0x0A

0x0B

0x10

Vendor name

7 Byte

BALLUFF

0x11

Vendor text

15 Byte

www.balluff.com

0x12

Product name

20 Byte

BNI IOL-101-000-K018

BNI IOL-101-S01-K018

BNI IOL-102-000-K019

BNI IOL-102-S01-K019

0x13

Product ID

7 Byte

BNI 000P

BNI 001W

BNI 000R

BNI 001Y

0x14

Product text

22 Byte

Sensor-Hub digital M8 4 inputs

Sensor hub digital M8 4 inputs SPC

Sensor hub digital M8 8 inputs

Sensor hub digital M8 8 inputs SPC

0x16

Hardware Revision

1 Byte

0x17

Firmware Revision

23 Byte

Parameter

Data

0x40

1-8

Inversion

1 Byte

0-FF

0x00

*: not used at BNI IOL-101-000-K018

Byte 0

Inversion 7.0*

Inversion 6.0*

Inversion 5.0*

Inversion 4.0*

Inversion 3.0

Inversion 2.0

Inversion 1.0

Inversion 0.0

Inversion Port (x):

x.0: Pin 4,

Andere Handbücher für BNI IOL-101-000-K018

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Balluff Zubehör Handbücher

Balluff

Balluff IO-Link BOS R080K-XM-RS10 S4 Series Bedienungsanleitung

Balluff

Balluff BAM PC-OS-024-23K-1 Bedienungsanleitung

Balluff

Balluff BTL5-T1 M P-S103 Series Bedienungsanleitung

Balluff

Balluff BFF T 004 Series Bedienungsanleitung

Balluff

Balluff BMD 1H Series Bedienungsanleitung

Balluff

Balluff BCS F01 Series Bedienungsanleitung

Balluff

Balluff BOS R254K-UUI-PR10-S4 Bedienungsanleitung

Balluff

Balluff BAM PC-TL-020-K Series Bedienungsanleitung

Balluff

Balluff IO-Link BCM R15E-DI00 Series Bedienungsanleitung

Balluff

Balluff BOS0285 Bedienungsanleitung

Balluff

Balluff BTL7-A5 Series Bedienungsanleitung

Balluff

Balluff BOS R254K-UUI-LH11-S4 Bedienungsanleitung

Balluff

Balluff BES M30EP-PFC12F-S04G-D12 Bedienungsanleitung

Balluff

Balluff BIP LD2-T017-04-BP Series Bedienungsanleitung

Balluff

Balluff BOS 50K RH12-S4 Series Bedienungsanleitung

Balluff

Balluff BTL7 Series Bedienungsanleitung

Balluff

Balluff BCS Q40BBAA-GPCFHC Series Bedienungsanleitung

Balluff

Balluff BES M12MF2-PSC20B-BV02-EXE Bedienungsanleitung

Balluff

Balluff BMF 235 Series Bedienungsanleitung

Balluff

Balluff BCS Bedienungsanleitung

Balluff

Balluff BOS 18K 1GA Series Bedienungsanleitung

Balluff

Balluff BES M30MH2-GNX10B-S04G-EXC Bedienungsanleitung

Balluff

Balluff BES M30MH2-GNX15F-BT02-EXB Bedienungsanleitung

Balluff

Balluff BTL5-T1 Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung