Banner Q4X Series Bedienungsanleitung

Quick Start Guide

Class 1 laser CMOS sensor with dual outputs and IO-Link. Patent pending.

This guide is designed to help you set up and install the Q4X sensor with dual discrete outputs and IO-Link. For complete

information on programming, performance, troubleshooting, dimensions, and accessories, please refer to the Instruction

Manual at www.bannerengineering.com. Search for p/n 190074 to view the Instruction Manual. Use of this document

assumes familiarity with pertinent industry standards and practices.

For illustration purposes, the threaded barrel model Q4X images are used throughout this document.

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Features

Figure 1. Sensor Features—Threaded Barrel

Models

1. Output Indicator (Amber)

2. Display

3. Buttons

Figure 2. Sensor Features—Flush Mount

Models

Display and Indicators

The display is a 4-digit, 7-segment LED. The main screen is the Run mode screen.

For 2-pt, BGS, FGS, and DYN TEACH modes, the display shows the current distance to the target in millimeters. For dual

TEACH mode, the display shows the percentage matched to the taught reference surface. A display value of

indicates the sensor has not been taught.

Figure 3. Display in Run Mode

1. Stability Indicator (STB—Green)

2. Active TEACH Indicators

• DYN—Dynamic (Amber)

• FGS—Foreground Suppression (Amber)

• BGS—Background Suppression (Amber)

Note: The indicators represent the currently selected channel. However, if Output 2 is set to something

other than LO, DO, or Complementary, then the indicators represent the Channel 1 status.

Q4X Stainless Steel Laser Sensor with Dual

Discrete Outputs and IO-Link

Original Document

190073 Rev. E 17 January 2017

190073

Output Indicator

•On—Output is on

• Off—Output is off

Active TEACH Indicators (DYN, FGS, and BGS)

• DYN, FGS, and BGS all off—Two-point TEACH mode

selected (default)

• DYN on—Dynamic TEACH mode selected

• FGS on—Foreground suppression TEACH mode

selected

• BGS on—Background suppression TEACH mode

selected

• DYN, FGS, and BGS all on—Dual TEACH mode

selected

Stability Indicator (STB)

•On—Stable signal within the specified sensing range

• Flashing—Marginal signal, the target is outside the

limits of the specified sensing range, or a multiple

peak condition exists

• Off—No target detected within the specified sensing

range

Buttons

Use the sensor buttons (SELECT)(TEACH), (+)(CH1/CH2), and (-)(MODE) to program the sensor.

(SELECT)(TEACH)

•Press to select menu items in Setup mode

• Press and hold for longer than 2 seconds to start

the currently selected TEACH mode (the default is

two-point TEACH)

(+)(CH1/CH2)

•Press to navigate the sensor menu in Setup mode

• Press to change setting values; press and hold to

increase numeric values

• Press and hold for longer than 2 seconds to switch

between Channel 1 and Channel 2

(-)(MODE)

•Press to navigate the sensor menu in Setup mode

• Press to change setting values; press and hold to

decrease numeric values

• Press and hold for longer than 2 seconds to enter

Setup mode

Note: When navigating the menu, the

menu items loop.

Laser Description and Safety Information

CAUTION: Use of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure. Do not attempt to disassemble this sensor for

repair. A defective unit must be returned to the manufacturer.

Class 1 Lasers

Class 1 lasers are lasers that are safe under reasonably foreseeable conditions of operation, including the use of optical

instruments for intrabeam viewing.

Laser wavelength: 655 nm Output: < 0.20 mW Pulse Duration: 7 µs to 2 ms

Q4X Stainless Steel Laser Sensor with Dual Discrete Outputs and IO-Link

2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 190073 Rev. E

Andere Handbücher für Q4X Series

Dieses Handbuch passt für folgende Modelle

Andere Banner Zubehör Handbücher

Banner

Banner L-GAGE LE250 IO-Link Bedienungsanleitung

Banner

Banner Q5X Bedienungsanleitung

Banner

Banner DF-G1 Expert Bedienungsanleitung

Banner

Banner Q4X Series Bedienungsanleitung

Banner

Banner MINI-BEAM Expert Series Bedienungsanleitung

Banner

Banner Q4X Series Bedienungsanleitung

Banner

Banner Q4X Series Bedienungsanleitung

Banner

Banner WORLD-BEAM QS18E Bedienungsanleitung

Banner

Banner PresencePLUS Pro Bedienungsanleitung

Banner

Banner M12 Bedienungsanleitung

Banner

Banner R-GAGE Q240RA-AF2 Bedienungsanleitung

Banner

Banner PresencePLUS P1B65Q Bedienungsanleitung

Banner

Banner iVu Plus BCR Bedienungsanleitung

Banner

Banner iVu Plus BCR Bedienungsanleitung

Banner

Banner U-Gage Ultrasonic Sensor Bedienungsanleitung

Banner

Banner iVu TG Bedienungsanleitung

Banner

Banner L-GAGE LM150 Series Bedienungsanleitung

Banner

Banner iVu Plus TG Gen2 Bedienungsanleitung

Banner

Banner D10 Expert Bedienungsanleitung

Banner

Banner Expert D12 Series Bedienungsanleitung

Banner

Banner World-Beam QS30 Bedienungsanleitung

Banner

Banner K30 Pro Bedienungsanleitung

Banner

Banner L-GAGE LH Series Bedienungsanleitung

Banner

Banner Q4X Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung