basIP AV-03BD Bedienungsanleitung
USER MANUAL
ENTRANCE PANEL
AV-03BD
AV-03BD
BAS-IP AV-03BD is a stylish panel that will surely fit perfectly into the interior
of any office center. The panel is made of high quality plastic and can be used
in almost any room.
Full User Manual
Appearance
Device description
wiki.bas-ip.com
Reader.
Loudspeaker.
Sensor call button.
Microphone.
Camera.
Backlight.
1
2
3
4
5
6
-
-
-
-
-
-
ENTRANCE PANEL
• Panel type: Individual.
• Camera: 1/4”.
• Resolution: 2 Мp.
• Сamera angle: 90° (horizontal).
• Output video: HD (1280 × 720), H.264 Main Profile.
• Night backlight: 6 LEDs.
• Light sensitivity: 0,01 LuX.
• Protection class: IP64.
• IK-Code: IK06.
• Working temperature: -40 — +65 °С.
• Power consumption: 6,5 W, in standby — 2,5 W.
• Power supply: +12 V DC, PoE 802.3af.
• Body: ABS plastic.
• Colors: Black, Silver.
• Size of the panel: 102 × 160 × 46 mm.
• Installation: Surface mount with and without a hood
(brackets included).
Main features
1
3
2
5
6
4
EAN: 5060514912607 (BLACK) EAN: 5060514912614 (SILVER)
Completeness check of the product
Before installation of the outdoor panel, it is necessary to check that
it is complete and all components are available.
Outdoor panel kit includes:
Outdoor panel
Manual
Surface mounting bracket with a hood / without hood
Set of wires with connectors for connection of power supply,
lock, and additional modules
A set of plugs for connections
Set of set screws with a wrench
1 pc
1 pc / 1 pc
1 pc
1 pc
1 pc
1 pc
After verifying the device's completeness, you can switch to the outdoor panel
connection.
For connection you will need:
Electrical connection
An Ethernet UTP CAT5 or higher cable connected to a network
switch / router.
Cable length recommendations
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters,
according to the IEEE 802.3 standard.
Power supply at +12 V, 2 amps, if there is no PoE.
Wires must be brought for the connection of alarm loops and home
automation (optional).
Connection scheme of electromechanical lock
using external power supply for panel and the lock.
You can connect any type of electromechanical or electromagnetic lock for which the switched current
does not exceed 5 Amps.
Connection scheme of electromagnetic lock
using external power supply for panel and the lock.
LAN (PoE)
Rs485 Interface
123
+12V 485+
4
GND 485-
Exit Button/Door Magnetic
123
EXIT DIN
4
GND DS
Power/Switch Output
123
+12V NC
4 5
GND NOCOM
+12V
DC
+-+12V
DC
+-
Electromechanical lock
Power supply
for the panel Power supply
for the lock
LAN (PoE)
Rs485 Interface
123
+12V 485+
4
GND 485-
Exit Button/Door Magnetic
123
EXIT DIN
4
GND DS
Power/Switch Output
123
+12V NC
4 5
GND NOCOM
+12V
DC
+-+12V
DC
+-
Power supply
for the panel Electromagnetic
lock Power supply
for the lock
Mechanical mounting
It is also necessary to provide supply of a power cable, additional modules
Before mounting the door panel, a hole or recess in the wall with dimensions
of 20 × 50 × 60 mm must be provided.
and the local network.
Niche Screws Outdoor Panel
50 mm
20 mm
120-140 cm
Bracket
with a hood
Outdoor Panel Bracket with a hood
111,3 mm
170,4 mm
73 mm102 mm 46 mm
160 mm
Warranty
The warranty card number
Model name
Serial number
Seller name
With following stated terms of warranty is familiar, functional test was
performed in my presence:
Customer signature
Warranty conditions
The warranty period of the product — 36 (thirty-six) months from
the date of sale.
Transportation of product must be in its original packaging or supplied one
by the seller.
The product is accepted in warranty repair only with a properly filled warranty
card and the presence of intact stickers or labels.
The product is accepted for examination in accordance with the cases
provided by law, only in the original packaging, in a full complete set,
appearance corresponding to the new equipment and presence of all relevant
properly filled documents.
This warranty is in addition to the constitutional and other consumer rights
and in no way restrict them.
Terms of warranty
The warranty card must indicate the name of the model, serial number,
purchase date, name of the seller, seller company stamp and
the customer’s signature.
Delivery to the warranty repair is carried out by the buyer himself.
Warranty repairs carried out only during the warranty period specified
in the warranty card.
The service center is committed to do everything possible to carry out
the repair warranty products, up to 24 working days. The period spent
on the restoration of product functionality is added to the warranty period.
EAN: 5060514912607 (BLACK) EAN: 5060514912614 (SILVER)
Notes
Notes
EAN: 5060514912607 (BLACK) EAN: 5060514912614 (SILVER)
www.bas-ip.com
Inhaltsverzeichnis
Andere basIP Gegensprechanlage Handbücher
basIP
basIP AT-10 Bedienungsanleitung
basIP
basIP AT-07L Bedienungsanleitung
basIP
basIP AK-10 Bedienungsanleitung
basIP
basIP AA-14FB Bedienungsanleitung
basIP
basIP AV-04FD Bedienungsanleitung
basIP
basIP AA-12FB Bedienungsanleitung
basIP
basIP SP-03 Bedienungsanleitung
basIP
basIP AQ-07LL Bedienungsanleitung
basIP
basIP BI-02FB Bedienungsanleitung
basIP
basIP AZ-07L Bedienungsanleitung
basIP
basIP AV-02FDR/E Bedienungsanleitung
basIP
basIP AV-03D Bedienungsanleitung
basIP
basIP AA-07B Bedienungsanleitung
basIP
basIP AA-07FB Bedienungsanleitung
basIP
basIP AV-08FB Bedienungsanleitung
basIP
basIP AA-14FBS Bedienungsanleitung
basIP
basIP AA-14FBS Bedienungsanleitung
basIP
basIP AA-07FB Bedienungsanleitung
basIP
basIP BA-08BD Bedienungsanleitung
basIP
basIP AT-10 Bedienungsanleitung
