Belden Hirschmann MACH104 Series Benutzerhandbuch

Mounting Instruction MACH104

Release

07/2014

Technical support

https://hirschmann-support.belden.eu.com

Mounting Instruction

Industrial Ethernet Workgroup Switch

MACH104 Full Gigabit Family

MACH104-20TX-F-4PoE...

MACH104-20TX-F...

MACH104-20TX-FR...

V.24USB

Aufkleber MAC-Adresse

FAULT

911

10 12

13 15

14 16

17 19

18 20

21 23

22 24

MACH104-20TX-F

V.24USB

Aufkleber MAC-Adresse

FAULT

911

10 12

13 15

14 16

17 19

18 20

21 23

22 24

MACH104-20TX-FR

V.24USB

Aufkleber MAC-Adresse

FAULT

911

10 12

13 15

14 16

17 19

18 20

21 23

22 24

MACH104-20TX-F-4PoE

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the

enclosed CD/DVD applies.

The performance features described here are binding only if they have been expressly agreed

when the contract was made. This document was produced by Hirschmann Automation and

Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right

to change the contents of this document without prior notice. Hirschmann can give no guarantee

in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

You can get the latest version of this manual on the Internet at the Hirschmann product site

(www.hirschmann.com).

Printed in Germany

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

Mounting Instruction 039 722-001-07-0714 – 22.07.2014

Mounting Instruction MACH104

Release

07/2014 3

Contents

Safety instructions 4

About this manual 8

Legend 8

1 Description 9

1.1 Display elements 9

1.1.1 Device state 9

1.1.2 Port state 10

1.2 Management interfaces 10

1.2.1 USB interface 10

2 Installation 11

2.1 Wiring and assembling the signal contact 11

2.2 Installing the device and grounding 12

2.2.1 Selecting the assembly location 12

2.2.2 Mounting on a flat surface 12

2.2.3 Mounting in a switch cabinet 12

2.2.4 Mounting on the wall 13

2.2.5 Grounding the device 13

2.3 Operating the device 14

3 Deinstallation 15

3.1 Removing the device 15

4 Technical data 16

4Mounting Instruction MACH104

Release

07/2014

Safety instructions

General safety instructions

You operate this device with electricity. The proper and safe operation of

this device depends on proper handling during transportation, proper

storage and assembly, and conscientious operation and maintenance

procedures. Improper use of this device is associated with the risk of

personal injury or property damage.

Read this documentation as well as the safety instructions and warn-

ings before connecting any cables.

Never start operation with damaged components.

The device does not contain any service components. If the device is

not functioning correctly, or if it is damaged, switch off the voltage

supply and return the device to Hirschmann for inspection.

Qualification requirements for personnel

Only allow qualified personnel to work on the device.

Qualified personnel have the following characteristics:

Qualified personnel are properly trained. Training as well as practical

knowledge and experience make up their qualifications. This is the

prerequisite for grounding and labeling circuits, devices, and systems

in accordance with current standards in safety technology.

Qualified personnel are aware of the dangers that exist in their work.

Qualified personnel are familiar with appropriate measures against

these hazards in order to reduce the risk for themselves and others.

Qualified personnel receive training on a regular basis.

Certified usage

Use the device solely for the application cases described in the

Hirschmann product information, including this manual.

Operate the device solely according to the technical specifications.

See “Technical data” on page 16.

WARNING

UNCONTROLLED MACHINE ACTIONS

To avoid uncontrolled machine actions caused by data loss, configure all

the data transmission devices individually.

Before you start any machine which is controlled via data transmission, be

sure to complete the configuration of all data transmission devices.

Failure to follow these instructions can result in death, serious injury,

or equipment damage.

Mounting Instruction MACH104

Release

07/2014 5

National and international safety regulations

Verify that the electrical installation meets local or nationally applicable

safety regulations.

Grounding the device

The device is grounded via the operating voltage connections.

Working voltage

The operating voltage is electrically isolated from the housing.

Connect solely an working voltage that corresponds to the type plate

of your device.

Internal fuses are triggered solely in the case of a detected error in the

device. In case of damage or malfunction of the device, turn off the

working voltage and return the device to the plant for inspection.

Only switch on the device when the housing is closed.

Only use connection cables that are permitted for the specified

temperature range.

Relevant for North America:

Only use copper wire/conductors of class 1, 60/75°C or 75°C.

Make sure that the disconnecting device is easily accessible so that

the MACH104 device can be disconnected from the mains voltage.

If you disconnect the device from the mains voltage using

- the plug in the socket

- an on/off switch

it must be easily accessible.

This applies to the following device variants only:

MACH104-20TX-FR...

Pull both non-heating plugs to disconnect the device from mains

voltage.

Housing

Only technicians authorized by the manufacturer are permitted to open

the housing.

Never insert sharp objects (small screwdrivers, wires, etc.) into the

inside of the device.

Keep the ventilation slits free to ensure good air circulation.

Make sure there is at least 3.94 inches (10 cm) of space in front of the

ventilation slits of the housing.

Mount the device horizontally or vertically as a desktop unit, in the

control cabinets.

CE marking

The labeled devices comply with the regulations contained in the following

European directive(s):

6Mounting Instruction MACH104

Release

07/2014

2011/65/EU (RoHS)

Directive of the European Parliament and of the Council on the restriction

of the use of certain hazardous substances in electrical and electronic

equipment.

2004/108/EC (EMC)

Directive of the European Parliament and the council for standardizing the

regulations of member states with regard to electromagnetic compati-

bility.

2006/95/EC

Directive of the European Parliament and the council for standardizing the

regulations of member states with regard to electrical equipment to be

used within specific voltage ranges.

In accordance with the above-named EU directive(s), the EU conformity

declaration will be at the disposal of the relevant authorities at the

following address:

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

The product can be used in the industrial sector.

Interference immunity: EN 61000-6-2

Emitted interference: EN 55022

Warning! This is a class A device. This device can cause interference in

living areas, and in this case the operator may be required to take appro-

priate measures.

Note: The assembly guidelines provided in these instructions must be

strictly adhered to in order to observe the EMC threshold values.

LED or laser components

LED or LASER components according to IEC 60825-1 (2007):

CLASS 1 LASER PRODUCT

CLASS 1 LED PRODUCT

FCC note

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference; (2) this device must accept any interference received,

including interference that may cause undesired operation.

Mounting Instruction MACH104

Release

07/2014 7

Appropriate testing has established that this device fulfills the require-

ments of a class A digital device in line with part 15 of the FCC regula-

tions.

These requirements are designed to provide sufficient protection against

interference when the device is being used in a business environment.

The device creates and uses high frequencies and can also radiate high

frequencies, and if it is not installed and used in accordance with this

operating manual, it can cause radio transmission interference. The use

of this device in a living area can also cause interference, and in this case

the user is obliged to cover the costs of removing the interference.

Relevant for rack mounted installations according to

UL 60950-1

Elevated Operating Ambient – If installed in a closed or multi-unit rack

assembly, the operating ambient temperature of the rack environment

may be greater than room ambient. Therefore, consideration should

be given to installing the equipment in an environment compatible with

the maximum ambient temperature of the device.

Reduced Air Flow – Installation of the equipment in a rack should be

such that the amount of air flow required for safe operation of the

equipment is not compromised.

Mechanical Loading – Mounting of the equipment in the rack should

be such that a hazardous condition is not achieved due to uneven

mechanical loading.

Circuit Overloading – Consideration should be given to the connection

of the equipment to the supply circuit and the effect that overloading of

the circuits might have on overcurrent protection and supply wiring.

Appropriate consideration of equipment nameplate ratings should be

used when addressing this concern.

Reliable Earthing – Reliable earthing of rack-mounted equipment

should be maintained. Particular attention should be given to supply

connections other than direct connections to the branch circuit (e.g.

use of power strips)

Recycling note

After usage, this device must be disposed of properly as electronic waste,

in accordance with the current disposal regulations of your county, state,

and country.

8Mounting Instruction MACH104

Release

07/2014

About this manual

The “Mounting Instructions” document contains safety instructions and infor-

mation that you require to mount the device.

The following manuals are available as PDF files on the CD/DVD supplied:

Installation user manual with additional information on the device:

– Device description

– Interfaces

– Configuration

– EMC and immunity

– Accessories

Basic Configuration user manual

Redundancy Configuration user manual

Graphical User Interface reference manual

Command Line Interface reference manual

Legend

The symbols used in this manual have the following meanings:

Listing

Work step

Subheading

Mounting Instruction MACH104

Release

07/2014 9

1 Description

1.1 Display elements

After the working voltage is set up, the software starts and initializes itself.

Afterwards, the device performs a self-test. During this process, various

LEDs light up.

The process takes around 15 seconds.

Figure 1: MACH104 Display elements

1 - Device status display elements

2 - Port status display elements

1.1.1 Device state

These LEDs provide information about conditions which affect the operation

of the whole device.

The following table applies to the stated device variants only:

MACH104-20TX-FR...

The following table applies to the stated device variants only:

MACH104-20TX-F...

MACH104-20TX-F-4PoE...

LED Display Color Activity Meaning

P Working

voltage

Green Lights up The working voltages 1 and 2 are on.

Yellow Lights up The working voltages 1 or 2 are on.

None The supply voltages 1 and 2 are too low.

V.2 4USB

Aufkleber MAC-Adresse

FAULT

911

10 12

13 15

14 16

17 19

18 20

21 23

22 24

MACH104-20TX-F

13 911 13 15 17 19 21 23

24 10 12 14 16 18 20 22 24

FAULT

10 Mounting Instruction MACH104

Release

07/2014

1.1.2 Port state

These LEDs display port-related information.

1.2 Management interfaces

1.2.1 USB interface

The USB socket provides an interface for the local connection of an Auto-

Configuration Adapter. It is used for saving/loading the configuration and for

loading the software.

LED Display Color Activity Meaning

P Working

voltage

Green Lights up Operating voltage is on

None Operating voltage is too low

LED Display Color Activity Meaning

LS Link status None Device detects an invalid or

missing link

Green Lights up Device detects a valid link

Flashes 1 time a period Port is switched to stand-by

Flashes 3 times a period Port is switched off

DA Data traffic Yellow Flashing Device is transmitting and/or

receiving data

LS DA2

LS DA1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Belden Schalten Handbücher

Belden

Belden HIRSCHMANN MSP30 Bedienungsanleitung

Belden

Belden HIRSCHMANN MACH4002-48+4G Bedienungsanleitung

Belden

Belden HIRSCHMANN IT MAMMUTHUS MTM8000 Series Bedienungsanleitung

Belden

Belden Hirschmann MACH104-PoEP Series Bedienungsanleitung

Belden

Belden HIRSCHMANN MACH 100 Series Bedienungsanleitung

Belden

Belden grass valley MASTERPIECE 12G-SDI Bedienungsanleitung

Belden

Belden Grass Valley Kayenne Beilage

Belden

Belden HIRSCHMANN IT MAMMUTHUS MTS2948X-6Q-A Bedienungsanleitung

Belden

Belden Hirschmann MACH1000 Series Bedienungsanleitung

Belden

Belden HIRSCHMANN EESX Series Kurzanleitung zur Einrichtung

Belden

Belden MAMMUTHUS MTM2800-PSU120 Bedienungsanleitung

Belden

Belden Hirschmann MACH102 Series Bedienungsanleitung

Belden

Belden grass valley KULA AV Bedienungsanleitung

Belden

Belden Hirschmann MACH4002 Series Bedienungsanleitung

Belden

Belden Hirschmann IT MAMMUTHUS MTS26 Series Bedienungsanleitung

Belden

Belden Hirschmann MACH1040 Series Bedienungsanleitung

Belden

Belden HIRSCHMANN HiOS-2A Bedienungsanleitung

Belden

Belden Hirschmann HiOS-2S Bedienungsanleitung

Belden

Belden Hirschmann RED25 Series Bedienungsanleitung

Belden

Belden Hirschmann SPIDER-SL-20-01T1S29999SZ9HHHH Bedienungsanleitung

Belden

Belden Hirschmann RS20 U Series Bedienungsanleitung

Belden

Belden Thinklogical TLX48 Bedienungsanleitung

Belden

Belden HIRSCHMANN OCTOPUS OS24 Series Bedienungsanleitung

Belden

Belden Hirschmann MICE MS20 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung