Belden Hirschmann DRAGON MACH Series Bedienungsanleitung

Installation DRAGON MACH Family

Release

02/2021

Technical support

https://hirschmann-support.belden.com

User Manual

Installation

Modular Industrial Gigabit Ethernet Backbone Switch

DRAGON MACH Family

05.02.2021 Installation DRAGON MACH Family

Release

02/2021

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use.

The performance features described here are binding only if they have been expressly agreed

when the contract was made. This document was produced by Hirschmann Automation and

Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right

to change the contents of this document without prior notice. Hirschmann can give no guarantee

in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

You can get the latest version of this manual on the Internet at the Hirschmann product site

(www.hirschmann.com).

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Installation DRAGON MACH Family

Release

02/2021 3

Contents

Important information 7

Safety instructions 9

About this Manual 16

Key 17

1 Description 18

1.1 General device description 18

1.1.1 Basic device 18

1.1.2 Media modules 19

1.1.3 Power supply unit module 19

1.1.4 Fan module 20

1.2 Device views 21

1.2.1 Media modules 24

1.2.2 Power supply unit module 25

1.2.3 Fan module 25

1.3 Power supply 26

1.3.1 Power supply modules 26

1.3.2 Media module D4K-10TP-PoE 28

1.4 Signal contact 29

1.5 Ethernet ports 30

1.5.1 10/100/1000 Mbit/s twisted pair port 30

1.5.2 100/1000 Mbit/s F/O port 31

1.5.3 1/2.5/10 Gbit/s F/O port 31

1.5.4 Support of PoE 31

1.5.5 Out-of-band management port 32

1.6 Display elements 33

1.6.1 Device state 33

1.6.2 PSU module status 37

1.6.3 Port status 38

1.6.4 Management interface status 39

1.6.5 Media module status 40

1.7 Management interfaces 43

4Installation DRAGON MACH Family

Release

02/2021

1.7.1 V.24 interface (external management) 43

1.7.2 USB interface 44

1.7.3 SD card interface 45

2 Installation 46

2.1 Checking the package contents 46

2.2 Installing the SD card (optional) 47

2.3 Installing a cover panel (optional) 48

2.4 Installing a power supply module 49

2.5 Installing a media module (optional) 50

2.6 Mounting the fan module 51

2.7 Installing and grounding the device 52

2.8 Wiring and mounting the signal contact (optional) 54

2.9 Connecting the supply voltage 56

2.9.1 Power supply modules 56

2.9.2 Media module D4K-10TP-PoE 58

2.10 Installing an SFP transceiver (optional) 59

2.11 Operating the device 59

2.12 Connecting data cables 60

3 Making basic settings 61

4 Monitoring the ambient air temperature 63

5 Maintenance and service 64

6Disassembly 65

6.1 De-installing a power supply module 65

6.2 Removing a fan module 66

6.3 Removing a media module 67

6.4 Removing an SFP transceiver (optional) 68

6.5 Removing the device 68

7 Technical data 69

7.1 General data 69

7.1.1 Basic device 69

Installation DRAGON MACH Family

Release

02/2021 5

7.1.2 Power supply unit module 69

7.1.3 Fan module 69

7.1.4 Media modules 69

7.2 Supply voltage 70

7.2.1 Power supply modules 70

7.2.2 Media module D4K-10TP-PoE 70

7.3 Signal contact 71

7.4 Power consumption/power output 71

7.5 Climatic conditions during operation 72

7.6 Climatic conditions during storage 72

7.7 Dimension drawings 73

7.7.1 Basic device 73

7.7.2 Power supply unit module 74

7.7.3 Fan module 74

7.7.4 Media modules 75

7.8 EMC and immunity 76

7.9 Network range 77

7.9.1 10/100/1000 Mbit/s twisted pair port 77

7.9.2 Fast Ethernet SFP transceiver 77

7.9.3 Bidirectional Fast Ethernet SFP transceiver 78

7.9.4 Gigabit Ethernet SFP transceiver 79

7.9.5 Bidirectional Gigabit Ethernet SFP transceiver 80

7.9.6 2.5 Gigabit Ethernet SFP transceiver 81

7.9.7 10 Gigabit Ethernet SFP+ transceiver 82

8 Scope of delivery 83

8.1 Basic device 83

8.2 Media modules 83

8.3 Power supply units 83

8.4 Fan module 83

9 Order numbers 84

10 Accessories 85

6Installation DRAGON MACH Family

Release

02/2021

11 Underlying technical standards 88

A Further support 89

Installation DRAGON MACH Family

Release

02/2021 7

Important information

Note: Read these instructions carefully, and familiarize yourself with the

device before trying to install, operate, or maintain it. The following notes may

appear throughout this documentation or on the device. These notes warn of

potential hazards or call attention to information that clarifies or simplifies a

procedure.

Symbol explanation

This is a general warning symbol. This symbol alerts you to

potential personal injury hazards. Observe all safety notes that

follow this symbol to avoid possible injury or death.

If this symbol is displayed in addition to a safety instruction of the

type “Danger” or “Warning”, it means that there is a danger of

electric shock and failure to observe the instructions will

inevitably result in injury.

This symbol indicates the danger of hot surfaces on the device.

In connection with safety instructions, non-observance of the

instructions will inevitably result in injuries.

DANGER

DANGER draws attention to an immediately dangerous situation, which will

inevitably result in a serious or fatal accident if not observed.

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION

CAUTION indicates a possible danger which, if not avoided, may result in

minor injuries.

8Installation DRAGON MACH Family

Release

02/2021

NOTICE

NOTE provides information about procedures that do not involve the risk of

injury.

Installation DRAGON MACH Family

Release

02/2021 9

Safety instructions

General safety instructions

You operate this device with electricity. Improper usage of the device

entails the risk of physical injury or significant property damage. The

proper and safe operation of this device depends on proper handling

during transportation, proper storage and installation, and careful

operation and maintenance procedures.

Before connecting any cable, read this document, and the safety

instructions and warnings.

Operate the device with undamaged components exclusively.

The device is free of any service components. In case of a damaged

or malfunctioning device, turn off the supply voltage and return the

device to Hirschmann for inspection.

Correct usage

Only use the device for those purposes specified in the catalog and in the

technical description. Only operate the device with external devices and

components that are recommended and permitted by the manufacturer.

The proper and safe operation of this product depends on proper handling

during transport, proper storage, assembly and installation, and

conscientious operation and maintenance procedures.

National and international safety regulations

Verify that the electrical installation meets local or nationally applicable

safety regulations.

WARNING

UNCONTROLLED MACHINE ACTIONS

To avoid uncontrolled machine actions caused by data loss, configure all

the data transmission devices individually.

Before you start any machine which is controlled via data transmission, be

sure to complete the configuration of all data transmission devices.

Failure to follow these instructions can result in death, serious injury,

or equipment damage.

10 Installation DRAGON MACH Family

Release

02/2021

Installation site requirements

Operate the device at the specified ambient temperature (temperature of

the ambient air at a distance of 2 in (5 cm) from the device) and at the

specified relative humidity exclusively.

When you are selecting the installation location, make sure you

observe the climatic threshold values specified in the technical data.

Use the device in an environment with a maximum pollution degree

that complies with the specifications in the technical data.

Strain relief

Note: If the strain relief is insufficient, there is a risk of torsion, contact

problems and creeping interruptions.

Relieve the connection points of cables and lines from mechanical

stress.

Design strain relieves in such a way that they prevent any mechanical

damage to cables, wires or conductors caused by external influences

or their own weight.

To prevent damage to device connections, connectors and cables,

follow the instructions for proper installation in accordance with DIN

VDE 0100-520:2013-06, sections 522.6, 522.7 and 522.13.

Qualification requirements for personnel

Only allow qualified personnel to work on the device.

Qualified personnel have the following characteristics:

Qualified personnel are properly trained. Training as well as practical

knowledge and experience make up their qualifications. This is the

prerequisite for grounding and labeling circuits, devices, and systems

in accordance with current standards in safety technology.

Qualified personnel are aware of the dangers that exist in their work.

Qualified personnel are familiar with appropriate measures against

these hazards in order to reduce the risk for themselves and others.

Qualified personnel receive training on a regular basis.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Belden Schalten Handbücher

Belden

Belden HIRSCHMANN IT MAMMUTHUS MTS2948X-6Q-A Bedienungsanleitung

Belden

Belden Hirschmann RS20 Series Bedienungsanleitung

Belden

Belden Hirschmann RED25 Series Bedienungsanleitung

Belden

Belden ThinkLogical TLX12 Bedienungsanleitung

Belden

Belden Hirschmann HiOS-2S Bedienungsanleitung

Belden

Belden Hirschmann OCTOPUS 8TX PoE-EEC Bedienungsanleitung

Belden

Belden Hirschmann RS20 U Series Bedienungsanleitung

Belden

Belden Hirschmann SPIDER Standard Line Series Bedienungsanleitung

Belden

Belden grass valley SIRIUS 800 Series Benutzerhandbuch

Belden

Belden HIRSCHMANN HiOS-2A Bedienungsanleitung

Belden

Belden Hirschmann SPIDER-SL-20-08T1999999SY9HHHH Bedienungsanleitung

Belden

Belden lumberg automation 0960 IOL 3816-001 Bedienungsanleitung

Belden

Belden Hirschmann SPIDER-SL-20-01T1S29999SZ9HHHH Bedienungsanleitung

Belden

Belden HIRSCHMANN MACH4002-48+4G Bedienungsanleitung

Belden

Belden Hirschmann MACH104-PoEP Series Bedienungsanleitung

Belden

Belden grass valley MASTERPIECE 12G-SDI Bedienungsanleitung

Belden

Belden Hirschmann RS20 Series Bedienungsanleitung

Belden

Belden Hirschmann Rail Switch Power Lite Bedienungsanleitung

Belden

Belden HIRSCHMANN EESX Series Kurzanleitung zur Einrichtung

Belden

Belden Thinklogical TLX48 Bedienungsanleitung

Belden

Belden Hirschmann MAMMUTHUS MTS2600 Bedienungsanleitung

Belden

Belden grass valley GV FABRIC Bedienungsanleitung

Belden

Belden Hirschmann GREYHOUND GRS1042 Bedienungsanleitung

Belden

Belden Grass Valley K-Frame Anleitung zur Verwendung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch