Belden Lumberg automation 0960 IOL 3816-001 Bedienungsanleitung

Manual

LioN-X IO-Link Hub

0960 IOL 3816-001 (16DIO low current Hub)

Manual LioN-X IO-Link Hub

Version 1.0 11/2023

Technical Support

lumberg-automation-support.belden.com

Contents

1 About this manual 5

1.1 General information 5

1.2 Explanation of symbols 6

1.2.1 Use of danger information 6

1.2.2 Use of general information 6

1.3 Version information 6

2 Safety instructions 7

2.1 Intended use 7

2.2 Qualified personnel 8

3 Designations and synonyms 9

4 System description 13

4.1 About LioN-X 13

4.2 IO-Link basics 14

4.3 Device variants 14

5 Assembly and wiring 16

5.1 General information 16

5.2 Outer dimensions 18

5.2.1 16DIO variant 18

5.3 Port assignments 19

5.3.1 IO-Link interface 19

Manual LioN-X IO-Link Hub

Version 1.0 11/2023

Contents

5.3.2 Ports for sensors/actuators 20

6 Configuration and startup 21

7 Process data assignment 22

7.1 16DIO: 0960 IOL 3816-001 23

7.1.1 Input Data 23

7.1.2 Output Data 24

8 Parameterization of the IO-Link Hub 25

8.1 IO-Link data storage 25

8.2 IO-Link block parameterization 25

8.3 IO-Link factory reset 25

8.4 16DIO: 0960 IOL 3816-001 26

8.5 Description of parameter data 27

8.5.1 Parameter – General device settings 27

8.5.2 Parameter – Input filter 28

8.5.3 Parameter – Input signal extension 29

8.5.4 Parameter - Input logic settings (NO/NC) 30

8.5.5 Parameter – fail-safe settings 31

8.5.6 Parameter – Surveillance Timeout 31

8.5.7 Parameter – User serial number 33

8.5.8 Parameter – Identification 33

9 Diagnostic Properties 34

9.1 Device Status 34

9.2 Device status in detail 35

Manual LioN-X IO-Link Hub

Version 1.0 11/2023

iii

Contents

10 IO-Link IODD 38

10.1 Device description file download 38

11 Technical data 39

11.1 General 40

11.2 IO-Link interface 41

11.3 Power supply for the module electronics/sensors 41

11.4 Digital inputs 43

11.4.1 Variant 0960 IOL 3816-001 43

11.5 Digital outputs 43

11.5.1 Variant 0960 IOL 3816-001 43

11.6 LEDs 44

12 Accessories 45

Manual LioN-X IO-Link Hub

Version 1.0 11/2023

1 About this manual 1.1 General information

1 About this manual

1.1 General information

Read the assembly and operating instructions on the following pages carefully

before starting up the modules. Keep this information where it is accessible

to all users.

The texts, figures, diagrams, and examples used in this document are

exclusively used to explain how to operate and apply the modules.

Please contact us if you have any detailed questions on installing and starting

up the devices.

Belden Deutschland GmbH

– Lumberg Automation™ –

Im Gewerbepark 2

D-58579 Schalksmühle

Germany

lumberg-automation-support.belden.com

www.lumberg-automation.com

catalog.belden.com

Belden Deutschland GmbH – Lumberg Automation™ – reserves the right to

make technical changes or changes to this document at any time without

notice.

Manual LioN-X IO-Link Hub

Version 1.0 11/2023

1.2 Explanation of symbols 1 About this manual

1.2 Explanation of symbols

1.2.1 Use of danger information

Danger information is denoted as follows:

Danger: Means that death, serious physical injury or substantial

damage to property will occur if the required safety measures are not

taken.

Warning: Means that death, serious physical injury or substantial

damage to property can occur if the required safety measures are not

taken.

Caution: Means that minor physical injury or damage to property can

occur if the required safety measures are not taken.

1.2.2 Use of general information

General information is denoted as follows:

Attention: Contains important information on the product, on how to

manage the product, or on the respective section of the documentation

to which your special attention is being drawn.

1.3 Version information

Version Created Changes

1.0 11/2023

Table 1: Overview of manual revisions

Attention: In the interest of product improvement and further

development, BELDEN reserves the right to change technical data in

this manual or changes to the product without prior notice.

Manual LioN-X IO-Link Hub

Version 1.0 11/2023

2 Safety instructions 2.1 Intended use

2 Safety instructions

2.1 Intended use

The products described in this manual are decentralized Input/Output

assemblies on a fieldbus I/O network.

We adhere to all safety standards when developing, producing, testing, and

documenting our products. When you adhere to the handling specifications

and safety instructions described for the configuration, assembly, and correct

operation, there should not normally be any risks for people or equipment.

The devices fulfill the requirements of the EMC guidelines (2014/30/EU) and

the low voltage guideline (2014/35/EU).

The devices are designed to be used in the industrial sector. The industrial

environment is distinguished by the fact that the consumer is not connected

directly to the public low voltage network. Additional measures are required

for use in residential areas or in business and commercial sectors.

Attention: This equipment may cause radio interference in residential

areas. In this case the operator may be requested to carry out

appropriate measures.

The proper and safe operation of this product depends on proper

transportation, storage, assembly, and installation, and careful operation.

A completely assembled device housing is required for the proper operation

of the devices. Only connect devices that fulfill the requirements of EN

61558-2-4 and EN 61558-2-6 to the IO-Link Hubs.

During the configuration, installation, start-up, maintenance, and testing of

the devices, adhere to the safety and accident-prevention guidelines for the

specific application.

Only install cables and accessories that fulfill the requirements and

regulations for safety, electromagnetic compatibility, and, where applicable,

telecommunication end devices, as well as the specification information.

Information on which cables and accessories are permitted for the installation

Manual LioN-X IO-Link Hub

Version 1.0 11/2023

2.2 Qualified personnel 2 Safety instructions

can be obtained from Belden Deutschland GmbH – Lumberg Automation™

or is contained in this manual.

2.2 Qualified personnel

The configuration, installation, start-up, maintenance, and testing of the

devices may only be performed by a qualified electrician who is familiar with

the safety standards of the automation technology.

The personnel requirements are based on the requirement profiles described

by ZVEI, VDMA, or equivalent organizations.

Only electricians who are familiar with the content of all provided device

documentation are authorized to install and maintain the devices described.

These are persons who

Dbased on their technical training, knowledge, and experience, and their

knowledge of the pertinent standards, can evaluate the work to be carried

out and identify any potential risks or

Dbased on working for several years in a related sector, have the same level

of knowledge as they would have from the relevant technical training.

Only Belden Deutschland GmbH – Lumberg Automation™ – is permitted to

make changes to the hardware or software of the products that go beyond

the scope of this manual.

Warning: Making unqualified changes to the hardware or software, or

non-adherence to the warning information contained in this document,

can result in serious personal injury or damage to equipment.

Attention: Belden Deutschland GmbH accepts no liability for any

damage caused by unqualified personnel or improper use. This

automatically voids the warranty.

Manual LioN-X IO-Link Hub

Version 1.0 11/2023

3 Designations and synonyms

AOI Add-On Instruction

API Application Programming Interface

BF Bus Fault LED

Big Endian Data format with High-B on first place (PROFINET and IO-Link)

BUI Back-Up Inconsistency (EIP diagnostics)

CC CC-Link IE Field

C/Q I/O port pin 4 mode, IO-Link communication/switching signal

Ch. A Channel A (Pin 4) of I/O port

Ch. B Channel B (Pin 2) of I/O port

CIP Common Industrial Protocol (media independent protocol)

Class A IO-Link port specification (Class A)

Class B IO-Link port specification (Class B)

CoAP Constrained Application Protocol

CSP+ Control & Communication System Profile Plus

DAT Device Acknowledgement Time

DCP Discovery and Configuration Protocol

DevCom Device Comunicating (EIP diagnostics)

DevErr Device Error (EIP diagnostics)

DI Digital Input

DIA Diagnostic LED

DO Digital Output

DIO Digital Input/Output

DTO Device Temperature Overrun (EIP diagnostics)

DTU Device Temperature Underrun (EIP diagnostics)

DUT Device under test

EIP EtherNet/IP

Manual LioN-X IO-Link Hub

Version 1.0 11/2023

3 Designations and synonyms

ERP Enterprise Resource Planning system

ETH ETHERNET

FE Functional Earth

FME Force Mode Enabled (EIP diagnostics)

FS Functional Safety

FSU Fast Start-Up

GSDML General Station Description Markup Language

High-B High-Byte

HTTPS Hyper Text Transfer Protocol Secure

ICE IO-Link port COM Error (EIP diagnostics)

ICT Invalid Cycle Time (EIP diagnostics)

IDE IO-Link port Device Error (EIP diagnostics)

IDN IO-Link port Device Notification (EIP diagnostics)

IDW IO-Link port Device Warning (EIP diagnostics)

IIoT Industrial Internet of Things

ILE Input process data Length Error (EIP diagnostics)

IME Internal Module Error (EIP diagnostics)

I/O Input / Output

I/O port X1 .. X8

I/O port pin 2 Channel B of I/O ports

I/O port pin 4 (C/Q) Channel A of I/O ports

IODD I/O Device Description

IOL or IO-L IO-Link

I/Q I/O port pin 2 mode, Digital Input/switching signal

ISDU Indexed Service Data Unit

IVE IO-Link port Validation Error (EIP diagnostics)

I&M Identification & Maintenance

JSON JavaScript Object Notation (platform independent data format)

L+ I/O port pin 1, sensor power supply

LioN-X 60 LioN-X variants with a width of 60mm

Manual LioN-X IO-Link Hub

Version 1.0 11/2023

Inhaltsverzeichnis

Andere Belden Schalten Handbücher

Belden

Belden ThinkLogical TLX12 Bedienungsanleitung

Belden

Belden HIRSCHMANN EESX Series Kurzanleitung zur Einrichtung

Belden

Belden HIRSCHMANN HiOS-2A Bedienungsanleitung

Belden

Belden grass valley KULA AV Bedienungsanleitung

Belden

Belden HIRSCHMANN MACH 4000 Series Bedienungsanleitung

Belden

Belden Grass Valley K-Frame Anleitung zur Verwendung

Belden

Belden Grass Valley Kayenne Beilage

Belden

Belden HIRSCHMANN MACH4002-48+4G Bedienungsanleitung

Belden

Belden HIRSCHMANN OCTOPUS OS24 Series Bedienungsanleitung

Belden

Belden HIRSCHMANN PTN-CSM310-A Bedienungsanleitung

Belden

Belden Hirschmann MICE MS20 Bedienungsanleitung

Belden

Belden Hirschmann MACH104-PoEP Series Bedienungsanleitung

Belden

Belden HIRSCHMANN MACH 100 Series Bedienungsanleitung

Belden

Belden HIRSCHMANN RSPE 30 Bedienungsanleitung

Belden

Belden Hirschmann RS20 U Series Bedienungsanleitung

Belden

Belden Hirschmann MACH104-PoEP Series Bedienungsanleitung

Belden

Belden grass valley MASTERPIECE 12G-SDI Bedienungsanleitung

Belden

Belden Hirschmann IT MAMMUTHUS MTS26 Series Bedienungsanleitung

Belden

Belden Hirschmann SPIDER 8TX EEC Bedienungsanleitung

Belden

Belden Hirschmann RED25 Series Bedienungsanleitung

Belden

Belden HIRSCHMANN GRS105 Bedienungsanleitung

Belden

Belden Hirschmann DRAGON MACH Series Bedienungsanleitung

Belden

Belden Hirschmann MACH4002 Series Bedienungsanleitung

Belden

Belden HIRSCHMANN BRS20 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Belden lumberg automation 0960 IOL 3816-001 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken