Belkin F5D7230-4 Bedienungsanleitung

Wireless Broadband Router

User Manual

No part of this publication may be reproduced in any form by any

means without the prior written permission. Other trademarks or

brand names mentioned herein are trademarks or registered

trademarks of their respective companies.

Jan 2003, Draft Version F/W:2.02.00

Wireless Broadband Router User Manual

NOTE

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection. This equipment generates, uses

and can radiated radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user‘s authority to operate the equipment.

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set

forth for an uncontrolled environment. This equipment should be

installed and operated with a minimum distance of 20 centimeters

between the radiator and your body.

Contents

1Introduction..................................................1

1.1 Overview........................................................................1

1.2 Features ........................................................................1

1.3 Package Contents .........................................................2

1.4 System Requirements ...................................................3

2Hardware Description & Installation.............5

2.1 Physical Outlook............................................................5

Front Panel..................................................................5

Rear Panel and Connectors........................................6

2.2 Hardware Connection....................................................7

Choosing a Place for the Router .................................7

Connecting the Wireless Broadband Router...............7

3Setting Up Ethernet/WLAN Client..............11

3.1 Setting up Ethernet Client............................................11

For Windows 98/ME..................................................12

For Windows NT .......................................................13

For Windows 2000 ....................................................14

3.2 Setting up Wireless Client............................................15

3.3 Checking Connection with the Router..........................16

4Web Configuration.....................................17

4.1 Accessing Web-Based Configuration Utility.................17

To enable Your Settings.............................................18

4.2 Viewing System Status ................................................19

4.3 Configuration for NAT Routing Mode...........................20

WAN Configuration for NAT Routing Mode ...............22

LAN Configuration for NAT Routing Mode.................27

Viewing Current DHCPAssignments.........................28

4.4 Configuration for Bridge Mode.....................................29

Wireless Broadband Router User Manual

4.5 Wireless LAN (2.4G) Configuration..............................32

4.6 Filters...........................................................................37

Specifing Your IP Filter Rules....................................37

Filter Types................................................................38

Filter Scenario of the Wireles Broadband Router......39

Viewing Filter Log......................................................40

Other Firewall Settings..............................................40

4.7 Forwarding...................................................................42

Setting Up Forwarding Entries ..................................42

If you have a Web server on your network… ............43

4.8 Administration..............................................................45

5Specification...............................................49

5.1 Hardware.....................................................................49

5.2 Software ......................................................................50

Safety Instructions

Installing

• Use only the type of power source indicated on the

marking labels.

• Use only the power adapter supplied with the product.

• Do not overload wall outlet or extension cords as this may

increase the risk of electric shock or file. If the power cord

is frayed, replace it with a new one.

• Proper ventilation is necessary to prevent the product

overheating. Do not block or cover the slots and openings

on the device, which are intended for ventilation and

proper operation. It is recommended to mount the product

with a stack.

• Do not place the product near any source of heat or

expose it to direct sunshine.

• Do not expose the product to moisture. Never spill any

liquid on the product.

• Do not attempt to connect with any computer accessory or

electronic product without instructions from qualified

service personnel. This may result in risk of electronic

shock or file.

• Do not place this product on an unstable stand or table.

Using • Power off and unplug this product from the wall outlet

when it is not in use or before cleaning. Pay attention to

the temperature of the power adapter. The temperature

might be high.

• After powering off the product, power on the product at

least 15 seconds later.

• Do not block the ventilating openings of this product.

• When the product is expected to be not in use for a period

of time, unplug the power cord of the product to prevent it

from the damage of storm or sudden increases in rating.

Servicing

Wireless Broadband Router User Manual

Do not attempt to disassemble or open covers of this unit yourself.

Nor should you attempt to service the product yourself, which may

void the user’s authority to operate it. Contact qualified service

personnel under the following conditions:

• If the power cord or plug is damaged or frayed.

• If liquid has been spilled into the product.

• If the product has been exposed to rain or water.

• If the product does not operate normally when the

operating instructions are followed.

• If the product has been dropped or the cabinet has been

damaged.

• If the product exhibits a distinct change in performance.

vii

About This User Manual

For brevity, throughout this manual the “Wireless Broadband

Router” is referred to as “the router” or “the device” and following

terms or abbreviations are used interchangeably:

• Access Point-AP

• Wireless LAN-WLAN

• Ethernet network-LAN-network

This User Manual contains information on how to install and

configure your Wireless Broadband Router to get your network

started accessing the Internet. From now on, we will guide you

through the correct configuration steps to get your device up and

run.

1 Introduction

1.1 Overview

Thank you for choosing this Wireless Broadband Router. The

Wireless Broadband Route features a wireless Access Point, a

4-port LAN switch and a WAN port, which extends your existing

broadband Cable/ADSL connection. It allows the broadband

connection to be shared through either the IEEE 802.11g Access

Point feature or the 10/100Base-TX Ethernet switch, which also

eliminates the purchase of additional hub or switch. Now your

wired and wireless network are integrated to enjoy various

bandwidth-consuming applications over the Internet.

With the support of new emerged 802.11g standard, the Access

Point provides data transfer of up to 54 Mbps, up to 5 times faster

than 802.11b. Since 802.11g operates on the same frequency of

2.4 GHz as 802.11b, it is backwards compatible with existing Wi-Fi

devices. The benefit is that you can preserve the existing 802.11b

infrastructure while migrating to the new screaming fast 802.11g.

The integrated DHCP server automatically assigns IP addresses to

your LAN devices, and with the built-in Network Address

Translation (NAT) function, your LAN is protected against outside

intruders. The router can also be configured to filter internal access

to the Internet. It is designed to provide a reliable Internet access

solution for the corporate environment, the small office and the

home user.

1.2 Features

• One 10/100 Base-TX RJ-45 auto sensing and crossover

Ethernet WAN port for Broadband connection (Cable/DSL

or direct Ethernet)

• Four RJ-45 LAN ports for 10/100Base-TX auto sensing &

crossover Ethernet Switch LAN connection

Wireless Broadband Router User Manual

• 802.11g Wireless LAN

• Build-in two internal antenna for wireless technology

• PPPoE (PPP over Ethernet) Client with Keep

Alive/Connect On Demand Support

• PAP and CHAP Authentication

• DHCP Client

• MAC Address Cloning

• DHCP Server

• NAT

• Firewall Support

• Bridge Mode Support

• 802.1D Spanning Tree Bridging

• IP Filtering, IP Forwarding

• DMZ Hosting

• ASCII/HEX Format 64/128 Bit WEP Key for Wireless LAN

• Allow List for Wireless LAN

• VPN Support (IPSec Passthrough, and PPTP

Passthrough)

• Configurable through Web Browser via WAN/LAN

• Software Upgrade

• NTP/Manual System Clock

• Configuration Saving/Retrieving

• Event Log

1.3 Package Contents

Check the contents of the package against the pack contents

checklist below. If any of the items is missing, then contact the

dealer from whom the equipment was purchased.

• Wireless Broadband Router x1

• Power Adapter and Cord x1

• CD-ROM x1

• RJ-45 Ethernet Cable x1

Andere Handbücher für F5D7230-4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Belkin Netzwerk-Router Handbücher

Belkin

Belkin TSG-UK-1-008 Referenzhandbuch

Belkin

Belkin VISION N1 Bedienungsanleitung

Belkin

Belkin N Wireless Bedienungsanleitung

Belkin

Belkin F5D5230-F Bedienungsanleitung

Belkin

Belkin F5D5230-4 Montage- und Wartungsanleitung

Belkin

Belkin F5D8233 Bedienungsanleitung

Belkin

Belkin F5D8236V3 Bedienungsanleitung

Belkin

Belkin N Wireless Bedienungsanleitung

Belkin

Belkin F9K1001V1 Bedienungsanleitung

Belkin

Belkin Wireless Gplus Notebook Card Bedienungsanleitung

Belkin

Belkin Bob Bedienungsanleitung

Belkin

Belkin AC 1600 DB Bedienungsanleitung

Belkin

Belkin INVENTEL CONFIG XP Montageanleitung

Belkin

Belkin F5D7330 Bedienungsanleitung

Belkin

Belkin OmniView 5000HQ Bedienungsanleitung

Belkin

Belkin F7D4302 v1 Bedienungsanleitung

Belkin

Belkin P73956EH Bedienungsanleitung

Belkin

Belkin AX1800 Bedienungsanleitung

Belkin

Belkin SURF N300 Bedienungsanleitung

Belkin

Belkin FILTRAGE DE MAC ADRESSE Montageanleitung

Belkin

Belkin F1PI242EGAU Bedienungsanleitung

Belkin

Belkin Wireless G Router Bedienungsanleitung

Belkin

Belkin F9K1001V3 Bedienungsanleitung

Belkin

Belkin VoIP Referenzhandbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise