Beyerdynamic MPR 210 Bedienungsanleitung
MPR 210
Kondensatormikrofon
Condenser Microphone
Microphone à condensateur
PRODUKTINFORMATION
PRODUCT INFORMATION
INFORMATIONS DE PRODUIT
MPR 210 – Contents 9
english
1. Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2. Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3. Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4. Microphone Positioning. . . . . . . . . . . . . . . . . . . . . . . . . 11
5. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7. Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8. Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9. Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 12
10. Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
MPR 210 – Condenser Microphone 11
english
MPR 210 – Condenser Microphone
10
4. Microphone Positioning
Each speaker should have his or her
own microphone.
The MPR 210 must not directly be
placed with its back in front of a wall.
The minimum distance to the wall
should be 15 to 20 cm. An acoustic
shadow due to obstructions, such as
books, newspapers or conference
papers, compromises performance
greatly.
When notebooks are being used, it is
also necessary to consider the micro-
phones. Notebooks should always be
positioned to the side of the micro-
phones. Otherwise, when opened, the
LCD screen would obstruct the sound.
This also applies to free-standing
monitors. Sufficient distance is the key
to the directional effect and good
feedback suppression. Moreover,
notebooks often have fans at the
back. The noise of the fan would then
be fully picked up by the microphone.
Two MPR 210 should not be directly
placed back to back, because the
acoustical corridor effect does not
work in this case. As shown in the
previous example the minimum
distance should be 15 to 20 cm.
For more information about application examples, please refer to the
beyerdynamic “Revoluto Design Guide”.
5. Installation
For permanent installation on a table, the MPR 210 provides screw
sockets on the left and right hand side at the bottom of the housing.
Warning:
We recommend that the threaded sleeve is screwed into the micro-
phone approx. 1/5" (5 mm). Refer also to the drilling template.
Thank you for selecting the MPR 210 condenser microphone. Please
take some time to read carefully through this information before using
the product.
1. Safety Information
• Protect the microphone from moisture and sudden impacts. You
could either injure yourself or others or damage the microphone.
• Do not blow into the microphone, you could damage the
transformer. It is preferable to carry out a speech trial.
• When using wired microphones always ensure that the microphone
cable is laid so that it does not present a trip hazard.
2. Applications
The MPR 210 is a modern desktop microphone which is ideal for
discussions, tele/video conferencing and announcements.
The Revoluto technology with integrated microphone capsules provides
a so-called corridor characteristic which ensures a wide range of good
voice quality. Within this range the speaker can move freely, i.e. he/she
can stand up or sit down, move his/her head and move towards or
away from the microphone.
3. Connection
The MPR 210 provides a fixed connecting cable with a 3-pin male XLR
connector. It can be connected to any microphone input with phantom
power supply (24 - 52 V).
For more information, please refer to the wiring diagram.
The connecting cable can be guided to the rear or to the bottom.
For this you can remove the two small screws, turn the cable duct
appropriately and tighten the screws. The standard cable exit is on the
rear.
15 - 20 cm
15 cm
15 - 20 cm
Cable guided to the rear.
Cable guided to the bottom.
cable duct
cable duct
MPR 210 – Condenser Microphone 13
english
MPR 210 – Condenser Microphone
12
6. Maintenance
Use a soft, damp cloth for cleaning the MPR 210 microphone. If
necessary, you can use a gentle cleansing agent (such as washing-up
liquid). Make sure not to allow any water to enter the transducer
element and never use any solvent cleansers.
7. Service
Servicing must be carried out by qualified service personnel only.
Dismantling the microphone yourself will invalidate the guarantee.
8. Version
MPR 210 Desktop microphone with Revoluto
Microphone Array technology,
corridor characteristic . . . . . . . . . . . Order # 488.410
9. Technical Specifications
Transducer type. . . . . . . . . . . . . . . . . . . . . . Condenser
(back electret)
Frequency response. . . . . . . . . . . . . . . . . . . 130 - 17,000 Hz
Microphone . . . . . . . . . . . . . . . . . . . . . . . . Microphone Array,
patented
Polar pattern. . . . . . . . . . . . . . . . . . . . . . . . Corridor
Optimal distance when speaking. . . . . . . . . 60 - 80 cm
Open circuit voltage at 1 kHz . . . . . . . . . . . approx. 200 mV/Pa
Output level depending on the
selected position
Hi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mV/Pa
Mid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 mV/Pa (-10 dB)
Lo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mV/Pa (-20 dB)
Nominal impedance . . . . . . . . . . . . . . . . . . 200 Ω
Load impedance . . . . . . . . . . . . . . . . . . . . . > 1 kΩ
Max. SPL at f = 1 kHz, k < 1% . . . . . . . . . . 112 dB
Signal-to-noise ratio rel. to 1 Pa . . . . . . . . . 60 dB
Voltage supply . . . . . . . . . . . . . . . . . . . . . . Phantom powering
48 V ±4 V to 6.8 kΩ
supply impedance
24 V ±4 V to 1.2 kΩ
supply impedance
Power consumption . . . . . . . . . . . . . . . . . . 3 mA
T.H.D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 0.1%
Connection. . . . . . . . . . . . . . . . . . . . . . . . . 3-pin XLR, male
Temperature range . . . . . . . . . . . . . . . . . . . -10 °C to +40 °C
Dimensions (L x H x D) . . . . . . . . . . . . . . . . 300 x 40 x 45.5 mm
Weight (without cable) . . . . . . . . . . . . . . . . 230 g
10. Wiring Diagram
DEF2/PI MPR 210 (10.09)/611.433/Hoh. • Änderungen und Irrtümer vorbehalten • Subject to change without notice • Sous réserve de modifications • Printed in Germany
beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 7131 / 617 - 0 | Fax +49 (0) 7131 / 617 - 224
Weitere Vertriebspartner weltweit finden Sie unter www.beyerdynamic.de
For further distributors worldwide, please go to www.beyerdynamic.com
Inhaltsverzeichnis
Andere Beyerdynamic Mikrofon Handbücher
Beyerdynamic
Beyerdynamic M 88 Bedienungsanleitung
Beyerdynamic
Beyerdynamic Opus 62 Bedienungsanleitung
Beyerdynamic
Beyerdynamic Opus 53 Bedienungsanleitung
Beyerdynamic
Beyerdynamic MCE 58 Bedienungsanleitung
Beyerdynamic
Beyerdynamic Opus 89 Bedienungsanleitung
Beyerdynamic
Beyerdynamic FOX Bedienungsanleitung
Beyerdynamic
Beyerdynamic MCE 72 Series Bedienungsanleitung
Beyerdynamic
Beyerdynamic M 160 Bedienungsanleitung
Beyerdynamic
Beyerdynamic M 69 Bedienungsanleitung
Beyerdynamic
Beyerdynamic Revoluto Microphone Bedienungsanleitung
Beyerdynamic
Beyerdynamic SHM 201 - 215 Bedienungsanleitung
Beyerdynamic
Beyerdynamic TG V90 Bedienungsanleitung
Beyerdynamic
Beyerdynamic M 201 Bedienungsanleitung
Beyerdynamic
Beyerdynamic MCS 501 Installations- und Betriebshandbuch
Beyerdynamic
Beyerdynamic TG V35 S Bedienungsanleitung
Beyerdynamic
Beyerdynamic MCE 5 Bedienungsanleitung
Beyerdynamic
Beyerdynamic Classis GM 301 Bedienungsanleitung
Beyerdynamic
Beyerdynamic TG V70D Bedienungsanleitung
Beyerdynamic
Beyerdynamic MCS-D 3171 Bedienungsanleitung
Beyerdynamic
Beyerdynamic M 130 Bedienungsanleitung
Beliebte Mikrofon Handbücher anderer Marken
IK Multimedia
IK Multimedia iRig Stream MIC PRO Bedienungsanleitung
DAPAudio
DAPAudio RM-101 Bedienungsanleitung
AKG
AKG CHM 21 Bedienungsanleitung
Sennheiser
Sennheiser evolution wireless series EM 100 Bedienungsanleitung
Sony
Sony C-48 Bedienungsanleitung
GIGAMEDIA
GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung
