BGS technic BGS 8698 Bedienungsanleitung

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

BGS 8698

Glow Plug Electrodes Removal Tool Set, M8 / M10

TOOLS

1 Extractor spindle M4 x 0.7 x 100 mm

2 Extractor spindle M4 x 0.7 x 100 mm

3 Extractor spindle M3 x 0.5 x 100 mm

4 Twist drill 3.3 x 140 mm

5 Twist drill 2.5 x 120 mm

6 Screw tap M4 x 0.7

7 Screw tap M3 x 0.5

8 Spindle guide M10 x 1.25

9 Spindle guide M10 x 1

10 Spindle guide M8 x 1

11 Guide bolt M10x1.25 (3.5 mm)

12 Guide bolt M10x1 (3.5 mm)

13 Guide bolt M8x1 (3.5 mm)

14 Guide bolt M8x1 (2.5 mm)

15 Guide bolt M8x1 (2.5 mm)

16 Guide bolt M10 x 1 (4.5 mm)

17 Guide bolt M10 x 1.25 (4.5 mm)

18 Guide bolt M10 x 1.0 (3.5 mm)

19 Guide bolt M10 x 1.25 (3.5 mm)

20 Spindle nut M4 x 0.7

21 Spindle nut M4 x 0.7

22 Spindle nut M3 x 0.5

INTENDED USE

This tool kit is used to dismantle broken glow plug tips.

The included tools are suitable for glow plugs M8x1, M10x1 and M10x1.25.

SAFETY INSTRUCTIONS

•Use the tool for those jobs only for which it was designed.

•Always wear safety goggles and gloves when working with this tool.

•After completion of the repair work, make sure all tools have been removed from the engine

compartment.

•Remove the ignition key to prevent the engine from being inadvertently started.

•Do not use the tool if any parts are missing or damaged.

USE

Glow plug bodies with hexagonal drive and electrical

connection can be dismantled.

After breaking, the glow plug tip stays in

the cylinder head and can only be

removed by means of this tool or after

dismantling the cylinder head.

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

Install suitable guide bolt (11-19) for drilling.

The guide bolt must be chosen according to the length, inside diameter

and diameter of the thread or drill.

Bore up the glow plug tip with an appropriate twist drill.

The size of the twist drill depends on the glow plug tip.

Twist drill 2.5 x 120 mm (5)

Twist drill 3.3 x 140 mm (4)

Remove the guide bolt and using suitable tap to make a thread into the

glow plug tip.

The size of the tap depends on the size of the previously used twist

drill.

Tap M3 x 0.5 (7) at twist drill 2.5 x 120 mm

Tap M4 x 0.7 (6) at twist drill 3.3 x 140 mm

Mount the extractor spindle into the thread of the glow plug tip.

Extractor spindle M4 x 0.7 x 100 mm (1 / 2)

Extractor spindle M3 x 0.5 x 100 mm (3)

Mount the spindle nut (20 / 21 / 22) onto the extractor spindle and

screw the nut against the spindle guide, by using suitable tools.

The glow plug tip is pulling out upwards and can finally be removed

from the extractor spindle.

Inhaltsverzeichnis

Andere BGS technic Elektrowerkzeuge Handbücher

BGS technic

BGS technic BGS 9319 Bedienungsanleitung

BGS technic

BGS technic 8717 Bedienungsanleitung

BGS technic

BGS technic 8856 Bedienungsanleitung

BGS technic

BGS technic 3650 Bedienungsanleitung

BGS technic

BGS technic BGS 8978 Bedienungsanleitung

BGS technic

BGS technic 70326 Bedienungsanleitung

BGS technic

BGS technic 963 Bedienungsanleitung

BGS technic

BGS technic 2798 Bedienungsanleitung

BGS technic

BGS technic 8036 Bedienungsanleitung

BGS technic

BGS technic 3213 Bedienungsanleitung

BGS technic

BGS technic 8496 Bedienungsanleitung

BGS technic

BGS technic 8841 Bedienungsanleitung

BGS technic

BGS technic 7750 Bedienungsanleitung

BGS technic

BGS technic 8653 Bedienungsanleitung

BGS technic

BGS technic 8874 Bedienungsanleitung

BGS technic

BGS technic 8834 Bedienungsanleitung

BGS technic

BGS technic 8301 Bedienungsanleitung

BGS technic

BGS technic 8421 Bedienungsanleitung

BGS technic

BGS technic 8829 Bedienungsanleitung

BGS technic

BGS technic BGS 9928 Bedienungsanleitung

BGS technic

BGS technic 8495 Bedienungsanleitung

BGS technic

BGS technic BGS 6705 Bedienungsanleitung

BGS technic

BGS technic 7729 Bedienungsanleitung

BGS technic

BGS technic 5266 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch