Billion 7025 Bedienungsanleitung

ISDN PCI Card

Quick Start Guide

This product is designed for the ISDN with Basic Rate Interface.

Quick Start Guide

For more detailed instructions on configuring and

using the ISDN card, please refer to the on-line

manual.

Package Contents

• One ISDN card

• One ISDN card installation CD with drivers, utility and bundled

application software programs

• One RJ-45 ISDN cable

• This Quick Start Guide

Installing the ISDN card

Connect your ISDN line to the ISDN S0RJ-45 jack.

ISDN PCI card

For Windows 95, OEM Service Release 2 (OSR2)

or Windows 98:

1. Start Windows. After the opening banner, Windows

will tell you that your ISDN card has been detected.

You will then see the following screen for Windows 95:

Or you will see the following screen for OSR2:

Or you will see the following screen for Windows 98:

Quick Start Guide

2. Insert the installation CD into the CD-ROM drive (D:

or E: , etc.).

3. For Windows95, select “Driver from disk provided by

hardware manufacturer”. For OSR2, click “Next >” to go

on. For Windows 98, click “Next >”. Then, check

“Specify a location:” and browse for “D:\Driver\Win98” (D:

represents your CD-ROM drive).

4. Follow the instructions on the screen. Windows will

copy the driver files to Windows sub-directories.

5. Then, Windows will start copying system files and you

might see the following screen prompting for the path

of the Windows source files. Please specify the location

of your Windows source files and click “OK”.

6. For Windows 95 or OSR2, if the Microsoft ISDN

Accelerator Pack 1.1 or Dial-Up Networking 1.3 has

been installed before, Windows will detect some files

with newer version. Press “Yes” to keep the newer files.

7. For Windows 95 or OSR2, if the Microsoft ISDN

Accelerator Pack 1.1 or Dial-Up Networking 1.3 is not

installed before, you should see the following screen.

ISDN PCI card

8. After complete installing the ISDN card driver, you will

be prompted to restart the computer. Press “Yes” to

restart your computer.

For Windows NT 4.0:

1. Start Windows. Insert the installation CD into the CD-

ROM drive (D: or E: , etc.).

2. Run “Setup.exe” in the root directory of installation CD.

3. Press “Windows NT Driver” button. Then, the following

window appears.

4. Click “OK” to begin copying files. After that, the

“Setup Program” will start.

Quick Start Guide

5. If your PC has PnP BIOS, you can choose “Auto setting”.

Then the IRQ and I/O Port of the ISDN card will be

configured by the system.

6. After setting the properties of the ISDN card, you might

see the following screen prompting for the path of the

Windows NT source files to installing the Remote

Access Service (RAS).

7. When the RAS is installed, you will see the following

screen for configuring ISDN ports as RAS devices.

ISDN PCI card

8. Press “OK” to select “ISDN1-NTWANMP” as one of the

“RAS Capable Devices”, you should then see the

following screen.

9. Click “Add...” for adding “ISDN2-NTWANMP” to the

list of RAS communication ports. The “ISDN1” and

“ISDN2” ports make the ISDN card be capable of

dialing or receiving multilink calls. For more details

about configuring the multilink support in Windows NT

4.0, please refer to the on-line help of RAS.

10. Click “Continue” to complete RAS setup, and you

should see the ISDN card has been installed as a

network adapter.

Quick Start Guide

11. Click “Close”. Then, you will be prompted to restart the

computer.

12. Press “Yes” to restart your computer and finish the

driver installation.

For Windows ME:

1. Start Windows. After the opening banner, Windows

will tell you that your ISDN card has been detected.

2. Insert the installation CD into the CD-ROM drive (D:,

or E:, etc.). Select “Specify a location:” and browse for

“D:\Driver\WinME” (D: represents your CD-ROM drive).

Click “Next >”.

ISDN PCI card

3. After pressing “Next >” button for the next screen, then

press “Finish”.

4. If the next screen appears when Windows finishes

installing the drivers, press “Yes” to restart the

computer.

For Windows 2000:

1. Start Windows. After the opening banner, Windows

will tell you that your ISDN card has been detected.

Press “Next>”

Quick Start Guide

2. Insert the installation CD into the CD-ROM drive (D:,

or E:, etc.). Select “Specify a location” and browse for

“D:\Driver\Win2000” (D: represents your CD-ROM

drive). Click “OK”.

3. After pressing “Next >” for the next screen, click

“Yes” if windows titled “Digital Signature Not Found”

appear. Then, press “Finish” to end the installation.

For Windows XP:

1. Start Windows. After the opening banner, Windows

will tell you that your ISDN card has been detected.

Press “Next>”

Andere Handbücher für 7025

Inhaltsverzeichnis

Andere Billion PCI-Karte Handbücher

Billion

Billion PCI Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung