BLAUBERG SMART Original Betriebsanleitung
Service instruction
Smart
Smart IR
Smart
Smart IR
SMART-EN-04
MANUFACTURED ON (DATE):
SALES DATE
APPROVAL MARK
SOLD
model (check applicable)
is recognized as serviceable
BLAUBERG Company is happy to offer your attention a new generation product, the
BLAUBERG Smart fan. The solid team of high-qualified professionals with many years
of working experience, technological innovations in design and production, high-quality
components and materials from the top worldwide producers have become the
precondition for the best fan in its class.
BLAUBERG Smart fan is the combination of design, high performance and silence
operation multiplied by intelligence.
While you enjoy your rest, the BLAUBERG Smart guards your comfort. It is enough to
connect it to power mains to have the ideal microclimate in your bathroom
automatically maintained.
INTRODUCTION
The present service instruction contains a technical description, technical data sheets,
operation and mounting guidelines, safety precautions and warnings for safe and
correct operation of the fan BLAUBERG Smart.
USE
BLAUBERG Smart fan is designed for ventilation of humid residential and public
premises heated during winter season.
The fan design is regularly improved, so some models can slightly differ from those
ones described in this service instruction.
COMPLETE SET
The complete set includes:
fan - 1 item;
connecting piece with a back valve Ø 100 mm - 1 item;
connecting piece with a back valve Ø 125 mm - 1 item;
remote controller - 1 item;
screws and dowels - 4 items;
service instruction;
packing box.
BASIC CHARACTERISTICS
The fan designations, parameters, outer view, overall and connecting dimensions are
shown in tables 1, 2, 3, 4 and in fig. 1, 2.
2
Voltage [V]
Frequency [Hz]
Max. power [W]
Current [A]
RPM [min-1]
3
Max. air capacity [m /h]
Ingress Protection Rating
Weight [kg]
100-240
50-60
3,8
0,03
2200
133
IP 44
0,35
Table 1
3
Table 2
Table 3
Speed
mode
Connecting piece
diameter
Noise level,
3 m [dBA]
Max.
air capacity
3
[m /h]
100
24 Hours 33 17
Quiet 72 22
Maximal 106 31
125
24 Hours 40 17
Quiet 83 21
Maximal 133 32
Air capacity,
factory settings
3
[m /h]
33
72
82
40
83
97
Control range
3
[m /h]
33 ... 72
72 ... 106
40 ... 83
83 ... 133
Type
Functions
Humidity control
24 Hours
Speed adjustment
Interval ventilation
External switch
Pause
SMART
Turn-off delay timer
Turn-on delay timer
+
SMART IR +
+
+
+
+
+
+
+
+
+
+
+
+ +
The fan has four basic modes and one extra mode:
SLEEP - in this mode the fan does not move and it is ready to accept a signal from the
sensors or from the external switch.
24 Hours - the fan runs permanently with low speed and provides minimum air exchange
in the room. After humidity changes the fan turns to MAXIMAL mode (by default) or
QUIET mode.
After the motion sensor detects some movement in the room or after signal from the external
sensor the fan turns to QUIET mode.
QUIET - optimal operation mode of the fan that ensures sufficient air capacity and low noise
level. This mode is turned on after activation of the motion sensor, closing of the external
switch or humidity level increase. For the humidity sensor this mode may be activated from
the fan menu.
MAXIMAL - operation mode with maximum air capacity. It is turned on after humidity
increase. This mode is activated for the humidity sensor by default.
INTERVAL VENTILATION - extra mode. After 15 hours standstill the fan is turned on to
3
ventilate the room with air capacity 83/72m /h (Ø125/Ø100) for 2 hours. If any sensor or
the external switch is activated during interval ventilation mode, the fan will switch to the
respective mode depending on the activated device.
Motion sensor
+
+
4
Table 4
OPERATION RULES
The fan is rated for connection to single-phase ac 100-240 V / 50-60 Hz power supply
and is designed for continuous operation always connected to power mains.
The fan is rated for operation at ambient temperature from +1 °C up to +45 °C.
The fan does not require grounding.
The fans do not cause interference with radio-, TV- or video- equipment.
Service life is not less than 5 years.
SAFETY RULES
All operations related to the fan electrical connections, servicing and repair works are
allowed only after the fan disconnection from power mains.
All mounting and servicing operations are allowed for duly qualified electricians with valid
electrical work permit for electric operations at the units up to 1000 V after careful study
of the present user's manual.
1
Dimensions [mm]
Model a
155,5
b
209
c
28
d
100/125
e
28
SMART/ SMART IR
2
5
The single-phase power grid must comply with the acting local electrical norms and
standards. The fixed electrical wiring must be equipped with an automatic circuit breaker
that is used for connection of the fan to power mains with gap on all poles at least 3 mm.
Make sure the impeller and the casing are not damaged before starting installation.
The casing internals must be free of any foreign objects which can damage the impeller
blades. Misuse of the product or any unauthorized modification are not allowed.
The product is not allowed for use by children and persons with reduced physical, mental
or sensory capacities, without proper practical experience or expertise, unless they are
controlled or instructed on the product operation by the person(s) responsible for their safety.
Supervise the children and do not let them play with the product.
Take steps to prevent ingress of smoke, carbon monoxide and other combustion products
into the room through open chimney flues or other fire-protection devices.
Sufficient air supply must be provided for proper combustion and exhaust of gases through
the chimney of fuel burning equipment to prevent back drafting. The maximum permitted
pressure difference per living units is 4 Pa.
Operating medium must not contain any dust or other solid impurities, sticky substances
or fibrous materials.
The fan is not rated for operation in a media that contains hazardous or explosive materials
and vapours, i.e. spirits, gasoline, insecticides, etc.
Do not close or block the fan intake or exhaust vent not to disturb the natural air passage.
Do not sit on the fan and do not put objects on the fan.
Follow the guidelines of this service instructions to ensure durable operation of the product.
Disconnect the fan from power mains prior to mounting and wireworks!
The fan is designed for wall mounting inside a round Ø 100 or 125 mm air duct or installation
a the ventilation shaft.
Use a replaceable connecting piece of required diameter to facilitate mounting.
To prevent air backdraught from the air duct press the back valve on a replaceable
connecting piece until click, fig. 7.
MOUNTING AND SETUP
6
3 4
5
6
7
7
The fan is equipped with a removable grille.
To release the grille from the face cover press the latches gently.
During mounting of the grille on the face cover back match the latches and corresponding
slots in the cover and insert to click. The arrow on the grille back side must be directed
to the shorter side close to the hole.
The fan casing has three round lowered tabs for cable entry.
Cut out a hole at the most suitable place with a knife.
8 9
10
8
11 12
13 14
FAN MOUNTING
15 16
9
17
19 20
21 22
18
10
The fan is rated for connection to 100-240 V / 50-60 Hz power mains.
Follow one of four available wiring diagrams to connect the fan to power mains.
The model SMART IR is fitted with extra terminal LI that is used for connection of the
light lamp up to 200 W/230 W or 100 W/130 V.
The fan connected according to this wiring diagram will be switched on receipt of the
signal from the motion sensor.
Wiring diagram 1
Wiring diagram 1
Automatic humidity and movement control (SMART IR).
The contacts L and N are connected to live and zero of power mains.
The fan is in SLEEP mode (does not run).
If 24 HOURS mode is activated, the fan switches to permanent low speed mode to provide
minimum round-the-clock ventilation.
After receipt of a signal from the motion sensor (for SMART IR model only) the fan turns
to QUIET mode. Some time after no movement is detected any more the fan reverts
to the previous mode.
After humidity level increase the fan is turned to MAXIMAL mode (by default) or
QUIET mode.
Some time after humidity drop the fan reverts to the previous mode.
Wiring diagram 2
Wiring diagram 3
Wiring diagram 4
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere BLAUBERG Lüfter Handbücher
BLAUBERG
BLAUBERG HRV H 120 Bedienungsanleitung
BLAUBERG
BLAUBERG Centro EC Bedienungsanleitung
BLAUBERG
BLAUBERG VENTO Expert A50-1 Pro Bedienungsanleitung
BLAUBERG
BLAUBERG ISO-RB 100 Bedienungsanleitung
BLAUBERG
BLAUBERG Auto Betriebsanleitung
BLAUBERG
BLAUBERG BLABBRAVO Bedienungsanleitung
BLAUBERG
BLAUBERG TOWER-V Series Bedienungsanleitung
BLAUBERG
BLAUBERG TRIO-100 Bedienungsanleitung
BLAUBERG
BLAUBERG Axis series Bedienungsanleitung
BLAUBERG
BLAUBERG Axis-Jet Series Bedienungsanleitung
BLAUBERG
BLAUBERG Tower-SV series Bedienungsanleitung
BLAUBERG
BLAUBERG BLABQUATRO Bedienungsanleitung
BLAUBERG
BLAUBERG VENTO inHOME Wi-Fi Bedienungsanleitung
BLAUBERG
BLAUBERG AERIS MINI-WHI Bedienungsanleitung
BLAUBERG
BLAUBERG Lux 100 Betriebsanleitung
BLAUBERG
BLAUBERG Axis-FP Series Bedienungsanleitung
BLAUBERG
BLAUBERG Centro-mZ 100 L Bedienungsanleitung
BLAUBERG
BLAUBERG Kamin 125 Installationshandbuch
BLAUBERG
BLAUBERG Extero Series Bedienungsanleitung
BLAUBERG
BLAUBERG Axis-P Bedienungsanleitung
