BLAUBERG VENTO Expert A50-1 W Bedienungsanleitung

SMART

VENTO Expert A50-1 W

VENTO Expert Duo A30-1 W

CONNECTION TO SMART HOME

OPERATION MANUAL

www.blaubergventilatoren.de

VENTO Expert

CONTENTS

PURPOSE

Purpose .................................................................................................2

Network parameters..............................................................................3

Control commands................................................................................3

Feedback ..............................................................................................4

A smart home is controlled only by the designated master device. All other devices such as telephones and the smart home system

are slaved to the master one via WiFi. The master automatically transmits control signals to the slaves.

A wireless network can be arranged in two ways:

1. A master device with its integrated Wi-Fi access point with a maximum of four slave devices connected.

However, if all the four connection slots of the master access point are in use, the master access point becomes inaccessible by a phone

or the smart home system.

2. Master devices, slave devices, phones and smart home system connect to a common router access point via Wi-Fi

In this case the master can simultaneously handle up to 32 slave connections and the smart home system. You can also connect several

master devices to the router network to enable zone-specific control.

The connection is set up by launching the Vents TwinFresh.exe file on your computer. Please refer to the ventilator user manual for instructions.

Master with

its WiFi

access point

Slave №1 Slave №2 Slave №3 Mobile

device

Wi-Fi router

Master Slave №1 ... ...

Slave №32 Mobile

device

Mobile

device

www.blaubergventilatoren.de

VENTO Expert

The unit is controlled via UDP transport protocol.

Master device IP address is

• 192.168.1.4 – the master device runs without a router and has its own WiFi access point (see Connection diagram 1).

• Other IP – the master device connects to the router WiFi access point (Connection diagram 2). The master device IP address is set

manually by launching the Blauberg Vento.exe ﬁle on your PC.

The master device port is 4000.

Commands,

dec Description Value, dec Size,

[bytes]

1Access of data for the control page (see «Mobile application») Any byte 1

2Unit activation/deactivation Any byte 1

3Unit activation/deactivation Any byte 1

4Speed selection

1 – Low

2 – Medium

3 – High

5Manual speed setting enabling and setup 22 - 255 1

6Air ﬂow direction setting

0 – Ventilation

1 – Heat Recovery

2 - Air Supply

9Timer activation/deactivation 1 – Night mode

2 – Party mode 1

11 Humidity sensor threshold setting, [RH%] 40 - 80 1

15 Night mode timer setting, [sec] 0 – 86400 3

16 Party mode timer setting, [sec] 0 – 86400 3

17 Deactivation delay timer setting, [sec] 0 – 86400 3

21 Humidity sensor activation/deactivation Any byte 1

22 Relay sensor activation/deactivation Any byte 1

23 0-10 V sensor activation/deactivation (On/Off) Any byte 1

25 0-10 V sensor threshold setting, [%] 5 - 100 1

27 Access of data for the slave status page (see «Mobile application») Any byte 1

28 Master device search Any byte 1

30 Master device ﬁlter timer reset Any byte 1

31 Cloud server control activation 0 – Off

1 – On 1

0 1 2 3 4 5 6 7... N-2 N-1

0x6D 0x6F 0x62 0x69 0x6C 0x65 Command1 Value1 Command n value n 0x0D 0x0A

N is the packet size.

Example of unit activation/deactivation and low speed selection

0x6D 0x6F 0x62 0x69 0x6C 0x65 0x03 0x04 0x01 0x0D 0x0A

Example of «Ventilation» air ﬂow direction setting

0x6D 0x6F 0x62 0x69 0x6C 0x65 0x06 0x00 0x0D 0x0A

Example of night mode timer setting: 24 hours, 00 minutes, 00 seconds

0x6D 0x6F 0x62 0x69 0x6C 0x65 0x03 0x04 0x01 0x0D 0x0A

NETWORK PARAMETERS

CONTROL COMMANDS

www.blaubergventilatoren.de

VENTO Expert

0123456 7...

0x6D 0x61 0x73 0x74 0x65 0x72 Parameter1 value1 … Parameter n value n

FEEDBACK

Parameters,

dec Description Value, dec Size,

[bytes]

3Device status (On/Off) 0 – Off

1 – On 1

4Selected speed

1 – Low

2 – Medium

3 – High

4 – Manual

5Manual speed setting value 22 - 255 1

6Air ﬂow direction

0 – Ventilation

1 – Heat Recovery

2 – Air Supply

8Current humidity level, [RH%] 39 - 90 1

9Operation mode

0 – Regular

1 – Night mode

2 – Party mode

11 Humidity sensor activation threshold, [RH%] 40 - 80 1

12 Alarm status (emergency stop)(status bar) 0 – No

1 – Yes 1

13 Relay sensor status (status bar) 0 – No

1 – Yes 1

14 Party mode / night mode timer countdown, [sec] 0 – 86400 3

15 Current night time mode timer setting, [sec] 0 – 86400 3

16 Current party mode timer setting, [sec] 0 – 86400 3

17 Current deactivation delay timer setting (boost mode), [sec] 0 – 86400 3

18 Filter end of life message (status bar) 0 – 86400 1

19 Humidity sensor status (status bar) 0 – No

1 – Yes 1

20 BOOST mode after any sensor response (status bar) 0 – No

1,2 – Yes 1

21 Humidity sensor 0 — Off

1 – On 1

22 Relay sensor 0 — Off

1 – On 1

23 0 – 10 V sensor 0 — Off

1 – On 1

25 0 – 10 V sensor activation threshold, [%] 5 - 100 1

26 0 – 10 V sensor status (status bar) 0 — Off

1 – On 1

27 Slave device search 0 – ofﬂine

>0 – online 32

28 Response to «Slave device search» request IP address 4

31 Cloud server control activation status 0 — Off

1 – On 1

37 0 – 10 V sensor current status 0 – 100 1

www.blaubergventilatoren.de

VENTO Expert

There are four types of feedback packets:

1. Control page data. Parameters: 3,9,12,19,13,26,4,5,6,8,14,18,20,37

2. Settings page data. Parameters: 11,21,22,23,15,16,17,25,31

3. Slave device search data: Parameters: 27

4. Response to «Slave device search» request. Parameters: 28

Feedback packet 1 is sent in response to control commands 1,3,4,5,6,9 and 30.

Feedback packet 2 is sent in response to control commands 2,21,22,23 and 31.

Feedback packet 3 is sent in response to control command 27.

Feedback packet 4 is sent in response to control command 28.

Example of data request for the control page

Request:

0x6D 0x6F 0x62 0x69 0x6C 0x65 0x01 0x0D 0x0A

Response:

0x6D 0x61 0x73 0x74 0x65 0x72 0x03 0x01 0x09 0x00 0x0C 0x00 0x13 0x00

0x0D 0x00 0x1A 0x00 0x04 0x02 0x05 0x3C 0x06 0x00 0x08 0x32

0x0E 0x00 0x00 0x00 0x12 0x00 0x14 0x00

Example of data request for the settings page

Request:

0x6D 0x6F 0x62 0x69 0x6C 0x65 0x02 0x0D 0x0A

Response:

0x6D 0x61 0x73 0x74 0x65 0x72 0x0B 0x46 0x15 0x01 0x16 0x01

0x17 0x01 0x0F 0x00 0x70 0x80 0x10 0x00 0x38 0x40 0x11 0x00 0x07 0x8

0x19 0x32

This response displays the night mode timer setting: 08:00:00, party mode timer setting: 04:00:00, delay timer setting: 00:30:00 and other

parameters.

Example of data request for the slave device search page

Request:

0x6D 0x6F 0x62 0x69 0x6C 0x65 0x1B 0x0D 0x0A

Response:

0x6D 0x61 0x73 0x74 0x65 0x72 0x1B 0x6E 0x69 0xB4 0xC8 0xAA 0x00 0x00

0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

Example of slave device search

Request:

0x6D 0x6F 0x62 0x69 0x6C 0x65 0x1C 0x0D 0x0A

Response:

0x6D 0x61 0x73 0x74 0x65 0x72 0x1C 0xC0 0xA8 0x00 0x02

This response displays the master device IP address which is 192.168.0.2

www.blaubergventilatoren.de

VENTO_Expert(DUO)_W_SmartHouse_v.1(1)_EN

Andere Handbücher für VENTO Expert A50-1 W

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere BLAUBERG Lüfter Handbücher

BLAUBERG

BLAUBERG BRAVO Bedienungsanleitung

BLAUBERG

BLAUBERG BLAUBOX ME Series Bedienungsanleitung

BLAUBERG

BLAUBERG Trio Bedienungsanleitung

BLAUBERG

BLAUBERG Tower-SV series Bedienungsanleitung

BLAUBERG

BLAUBERG Iso-Mix 150 Bedienungsanleitung

BLAUBERG

BLAUBERG Valeo Bedienungsanleitung

BLAUBERG

BLAUBERG Sileo DC 100 Bedienungsanleitung

BLAUBERG

BLAUBERG BLABAERO Bedienungsanleitung

BLAUBERG

BLAUBERG Calm Betriebsanleitung

BLAUBERG

BLAUBERG Turbo 100 Bedienungsanleitung

BLAUBERG

BLAUBERG HRV H 120 Bedienungsanleitung

BLAUBERG

BLAUBERG ISO-RB 100 Bedienungsanleitung

BLAUBERG

BLAUBERG Axis-FP Series Bedienungsanleitung

BLAUBERG

BLAUBERG Lux 100 Betriebsanleitung

BLAUBERG

BLAUBERG VENTO Expert A50-1 Pro Bedienungsanleitung

BLAUBERG

BLAUBERG Smart Wi-Fi Bedienungsanleitung

BLAUBERG

BLAUBERG Kamin 125 Installationshandbuch

BLAUBERG

BLAUBERG Extero Series Bedienungsanleitung

BLAUBERG

BLAUBERG Iso Series Bedienungsanleitung

BLAUBERG

BLAUBERG KOMFORT L350 Installationshandbuch

BLAUBERG

BLAUBERG Sileo Design V2 Bedienungsanleitung

BLAUBERG

BLAUBERG BlauFast Bedienungsanleitung

BLAUBERG

BLAUBERG AERIS MINI-WHI Bedienungsanleitung

BLAUBERG

BLAUBERG Sileo Betriebsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung