BLAUBERG Turbo 100 Bedienungsanleitung

USER’S MANUAL

Turbo

INLINE MIXED-FLOW FANS

CONTENTS

Delivery set................................................................................................................................................................................................................6

Brief description .....................................................................................................................................................................................................6

Operation guidelines ..........................................................................................................................................................................................7

Designation key ....................................................................................................................................................................................................8

Installation .................................................................................................................................................................................................................9

Electronics operation algorithm ..................................................................................................................................................................10

Technical maintenance......................................................................................................................................................................................12

Storage and transportation regulations..................................................................................................................................................12

Manufacturer’s warranty...................................................................................................................................................................................13

This user’s manual is a main operating document intended for technical, maintenance, and operating staﬀ.

The manual contains information about purpose, technical details, operating principle, design, and installation

of the Turbo unit and all its modiﬁcations.

Technical and maintenance staﬀ must have theoretical and practical training in the ﬁeld of ventilation systems

and should be able to work in accordance with workplace safety rules as well as construction norms and

standards applicable in the territory of the country.

The information in this user’s manual is correct at the time of the document’s preparation.

The Company reserves the right to modify the technical characteristics, design, or conﬁguration of its products

at any time in order to incorporate the latest technological developments.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means in any information search system or translated into any language in any form without the prior

written permission of the Company.

READ THE USER’S MANUAL CAREFULLY BEFORE PROCEEDING WITH INSTALLATION WORKS.

COMPLIANCE WITH THE MANUAL REQUIREMENTS ENSURES RELIABLE OPERATION AND LONG

SERVICE LIFE OF THE UNIT.

KEEP THE USER’S MANUAL AVAILABLE AS LONG AS YOU USE THE UNIT. YOU MAY NEED TO

REREAD THE INFORMATION ON THE PRODUCT SERVICING.

FOLLOW THE USER’S MANUAL REQUIREMENTS TO ENSURE DURABLE AND

TROUBLE-FREE OPERATION OF THE UNIT.

SAFETY INSTRUCTIONS

Disconnect the unit from power supply prior to any connection, servicing,

maintenance, and repair operations.

Only qualied electricians with a work permit for electrical units up

to 1000 V are allowed for installation and maintenance. The present

user’s manual should be carefully read before beginning works.

• Single-phase power mains must comply with the acting local electrical

norms and standards.

• Fixed electrical wiring must be equipped with an automatic circuit

breaker.

• The unit must be connected to power mains through a QF automatic

circuit breaker integrated into the ﬁxed wiring system. The gap between

the circuit breaker contacts on all poles must be not less than 3 mm.

Check the unit for any visible damages of the impeller and the casing

before starting installation. The casing internals must be free of any

foreign objects that can damage the impeller blades.

• While mounting the unit, avoid compression of the casing! Deformation

of the casing may result in the motor jam and noisy operation. Misuse of

the unit and any unauthorised modiﬁcations are not allowed.

• Take steps to prevent ingress of smoke, carbon monoxide, and other

combustion products into the room through open chimney ﬂues or other

ﬁre-protection devices. Suﬃcient air supply must be provided for proper

combustion and exhaust of gases through the chimney of fuel burning

equipment to prevent back drafting. Transported air must not contain any

dust or other solid impurities, sticky substances, or ﬁbrous materials.

• Do not use the unit in a hazardous or explosive environment containing

spirits, gasoline, insecticides, etc.

THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.

DO NOT DISPOSE THE UNIT AS UNSORTED DOMESTIC WASTE.

• Do not close or block the intake or extract vents in order to ensure the

eﬃcient air ﬂow.

• Do not sit on the unit and do not put objects on it.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the

appliance.

Ensure that the fan is switched oﬀ from the supply mains before removing

the guard.

The fan is to be installed so that the blades are more than 2,1 m above the

ﬂoor;

Precautions must be taken to avoid the back-ﬂow of gases into the room

from the open ﬂue of gas or other fuel-burning appliances.

DELIVERY SET

Fan — 1 pc.

Screws and dowels — 4 pcs.

Plastic screwdriver (for models with a timer) — 1 pc.

User’s manual — 1 pc.

Packing box — 1 pc.

BRIEF DESCRIPTION

The product described herein is a mixed-ﬂow inline fan for supply or extract ventilation of premises.

The fan is designed for connection to ø 100, 125, 150, 160, 200, 250 and 315 mm air ducts.

The unit is equipped with a two speed motor.

Ø D B H L

Turbo 100 97 195,8 226/255* 302,5

Turbo 125 123 195,6 226/255* 258,5

Turbo 150 148 220,1 247/265* 289

Turbo 160 158 220,1 247/265* 289

Turbo 200 199 239 261/278* 295,5

Turbo 250 247 287 323/340* 383

Turbo 315 310 362 408/424* 445

* Turbo XXX GI1/G1/GTI1/GT1/GSI1/GS1

OPERATION GUIDELINES

The fan is rated for connection to single-phase AC 220-240 V/50 Hz or 220 V/60 Hz power mains.

The unit is rated for continuous operation.

The arrow on the fan casing must match the air direction in the system.

Ingress protection rating against access to hazardous parts and water ingress is IPX4.

The unit is rated as a Class II electrical appliance.

The fan is rated for operation at the ambient air temperature from +1 °C up to +40 °C.

Power supply [V/Hz] Transported air temperature [°C]

220-240/50 -25...+60

220/60 -25...+40

IF THE POWER CORD IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, CUSTOMER

SERVICE, OR SIMILAR QUALIFIED PERSONNEL IN ORDER TO AVOID DANGER.

DESIGNATION KEY

Turbo XXX X

Options:

T: timer

US: speed switch

Gl1: speed controller with an electronic thermostat and a temperature

sensor integrated inside an air duct. Temperature-based operation logic

G1: speed controller with an electronic thermostat and an outdoor

temperature sensor ﬁxed on a 4 m cable. Temperature-based operation logic

GTl1: speed controller with an electronic thermostat and an integrated

temperature sensor. Timer-based operation logic

GT1: speed controller with an electronic thermostat and an outdoor

temperature sensor ﬁxed on a 4 m cable. Timer-based operation logic

GSl1: speed controller with an electronic thermostat and an integrated

temperature sensor. Temperature-based switching on/oﬀ

GS1: speed controller with an electronic thermostat and an outdoor

temperature sensor ﬁxed on a 4 m cable. Temperature-based switching on/

oﬀ.

Spigot diameter [mm]

Inline mixed-ow fan

MOUNTING

The fan is suitable both for horizontal or vertical mounting on the ﬂoor, on the wall or on the ceiling (Fig. 1).

The fan can be installed independently or as part of a set with parallel or in-series connection (Fig. 2).

Install minimum 1 m long air duct on the intake spigot side in case of horizontal fan mounting or a hood in

case of vertical fan mounting.

The outlet spigot must always be connected to the air duct. The fan mounting sequence is shown in Fig. 3-11

and 14-19.

The fan wiring diagrams are shown in Fig. 12-13. Some fan models are equipped with a plastic limit stop in

front of the L1 terminal. Remove the limit stop for connection to the L1 terminal.

Designation:

L1 – minimum speed terminal

L2 – maximum speed terminal

QF – automatic circuit breaker

S– external speed controller

ST – external switch (for example, a light switch)

X – input terminal

SS/ST

Automatic circuit breaker

designation

Automatic

circuit breaker

External switch designation External switch

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere BLAUBERG Lüfter Handbücher

BLAUBERG

BLAUBERG VENTO Expert A50-1 Pro Bedienungsanleitung

BLAUBERG

BLAUBERG SMART Original Betriebsanleitung

BLAUBERG

BLAUBERG Sileo Design 100 Bedienungsanleitung

BLAUBERG

BLAUBERG VENTOErgo A50-1 Pro V.3 Bedienungsanleitung

BLAUBERG

BLAUBERG KOMFORT EC DBW 550 Bedienungsanleitung

BLAUBERG

BLAUBERG BRAVO Bedienungsanleitung

BLAUBERG

BLAUBERG Calm Betriebsanleitung

BLAUBERG

BLAUBERG BlauFast Bedienungsanleitung

BLAUBERG

BLAUBERG Sileo DC 100 Bedienungsanleitung

BLAUBERG

BLAUBERG Centro 100 L Bedienungsanleitung

BLAUBERG

BLAUBERG Sileo Design V2 Bedienungsanleitung

BLAUBERG

BLAUBERG Axis-P Bedienungsanleitung

BLAUBERG

BLAUBERG TRIO-100 Bedienungsanleitung

BLAUBERG

BLAUBERG TOWER-V Series Bedienungsanleitung

BLAUBERG

BLAUBERG AERIS MINI-WHI Bedienungsanleitung

BLAUBERG

BLAUBERG Sileo DC 100 Bedienungsanleitung

BLAUBERG

BLAUBERG Auto Betriebsanleitung

BLAUBERG

BLAUBERG Sileo Betriebsanleitung

BLAUBERG

BLAUBERG VENTO inHOME Wi-Fi Bedienungsanleitung

BLAUBERG

BLAUBERG Centro-mZ 100 L Bedienungsanleitung

BLAUBERG

BLAUBERG BLAUBOX ME Series Bedienungsanleitung

BLAUBERG

BLAUBERG BLABAERO Bedienungsanleitung

BLAUBERG

BLAUBERG Axis-Jet Series Bedienungsanleitung

BLAUBERG

BLAUBERG Centro EC Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung