Blue Ox BX1120 Bedienungsanleitung

BX1120

1997-2006 Jeep Wrangler

(Includes Rugged Ridge Double Tube Bumper)

Installation Instructions

292-6041 Rev J Page 1 of 5 6/24/14

1. Blue Ox®towing products and accessories are

intended to be installed by Blue Ox® Dealers

who are familiar with our products and have the

equipment and knowledge necessary to do “t

work”. If needed, Blue Ox®Dealers can be found

at www.blueox.com or by contacting our Customer

Care Department at (402) 385-3051.

2. Many Blue Ox®baseplates are designed to

use existing holes and hardware to mount the

baseplate to the towed vehicle. Even though bolts

are there, do not assume they are adequate for

baseplate mounting. Always use the hardware

supplied in the hardware kit and existing hardware

as specied in the installation instructions.

Reference your vehicle owner’s

manual for manufacturer’s towing

specications.

Serial Number

If the front of your vehicle looks different than

this, please contact us at (402)385-3051.

Failure to read and follow these instructions

could result in separation of the towed vehicle

from the tow bar, causing property damage,

loss of towed vehicle, personal injury or death.

WARNING

Bolt Size Grade 5 Grade 8

1/4” 10 14

5/16” 19 29

3/8” 33 47

7/16” 54 78

1/2” 78 119

5/8” 154 230

3/4” 257 380

Bolt Torque Specications

Torque in Foot-Pounds for Inch Bolts

Bolt Torque Specications

Torque in Foot-Pounds for Metric Bolts

Bolt Size Grade 8.8 Grade 10.9

6MM 6 8

8MM 16 22

10MM 31 40

12MM 54 70

14MM 89 117

16MM 161 230

18MM 222 318

Attachment Tab Height: 17-3/4”

Attachment Tab Width: 24”

Please read BOTH these Installation Instructions and the General Instructions prior to

installing or operating this equipment.

BX1120

1997-2006 Jeep Wrangler (Includes Rugged Ridge Double Tube Bumper)

Installation Instructions

292-6041 Rev J Page 2 of 5 6/24/14

Instruction Notes: Some drilling and trimming is required.

Place all components that are removed on a at, sturdy surface. All items will be reinstalled unless

otherwise noted after the baseplate is installed.

The dimensional variations between otherwise identical vehicles can be considerable. While the

baseplate was designed for easy installation, it may be necessary to tailor the baseplate slightly to

compensate for vehicle manufacturer’s tolerances.

The BX8869 Tail Light Wiring Kit is recommended for this vehicle.

Drill a hole according to the tail

light wiring kit instructions.

NOTICE

• Handling of some cosmetic parts when installing this product may require the use of protective

covers, rags, specialty tools, etc. to prevent damage.

• When using power drills be aware of the dangers of torque and drill bit length.

• When using a reciprocating saw be aware of objects behind the cutting surface.

• Use a good quality paint to spray cut edges of frame to prevent rusting.

• Be sure that ALL electrical connections are plugged in and accessories are functioning properly

before reinstalling the fascia.

• The baseplate is computer tested to your vehicle’s GVWR, exceeding this weight will void the

manufacturer’s warranty.

• Be sure to use Loctite®Red on all bolts before tightening. Tighten all bolts according to the

torque chart provided.

• Dealer or installer be certain the user receives these instruction sheets.

• If the baseplate is in an accident, it must be replaced. DO NOT use it again! An accident can

cause unseen damage and using it again could result in more damage or serious injury. DO NOT

use the baseplate if it is damaged or missing parts.



BX1120

1997-2006 Jeep Wrangler (Includes Rugged Ridge Double Tube Bumper)

Installation Instructions

292-6041 Rev J Page 3 of 5 6/24/14

Item No. Part No. Description Qty.

1.................................61-5799 .............................BX1120 Baseplate ...........................................................1

2.................................61-5208 .............................3/8”-16 Nut Plate w/ 14” Wire ..........................................4

3.................................201-0440 ...........................3/8”-16 x 1-1/2” Hex Head Bolt, Grade 5, ZP ..................4

4.................................203-0010 ...........................3/8” Lock Washer, ZP ......................................................4

5.................................203-0003 ...........................3/8” Flat Washer, ZP........................................................2

6.................................201-0979 ...........................#12-14 x 1” Self Drilling Screw, ZP..................................2

7.................................201-0192 ...........................#10-32 1/2” Round Slotted Head Screw..........................2

8.................................203-0054 ...........................#10 Lock Washer.............................................................2

9.................................202-0047 ...........................#10-32 Hex Nut, ZP.........................................................2

10...............................101-5822 ...........................4 Way Connector Adapter ...............................................2

11 ...............................226-0046(not shown) ........Baseplate Safety Cable, Class III....................................2

12...............................229-0359(not shown) ........Quicklink, 3/8”, ZP ...........................................................2

Tools Required

Large Vise Grip

Torque Wrench

Drill

Tape Measure

Loctite®RED

13/32” Drill Bit

7MM Socket

16MM Socket

9/16” Socket

Important:

Use only genuine factory replacement parts on your baseplate. Do NOT substitute homemade or non-typical parts. If a bolt is lost or in need of

replacement, for your safety and the preservation of your baseplate, be sure to use a replacement bolt of the same grade (In most cases it will be Grade

5, please reference the parts list above). Replacement parts may be ordered through your nearest Blue Ox® Dealer or Distributor. Failing to follow and/

or altering these installation instructions in either installation or required equipment will void the manufacturer’s warranty. Towing behind a non-motorized

vehicle will void the warranty.

BX1120

1997-2006 Jeep Wrangler (Includes Rugged Ridge Double Tube Bumper)

Installation Instructions

292-6041 Rev J Page 4 of 5 6/24/14

1. Remove three (3) metric bolts with the

16MM socket while having someone hold

the gear box and the idler arm. Set metric

bolts aside to be reinstalled later. Do this

to both sides of the vehicle.

2. Hold the baseplate into place and insert

the three (3) existing bolts on the driver’s

side through the baseplate, frame and

gear box. Tighten the bolts.

3. Clamp the baseplate on the passenger’s

side with the large vise grips. Using the

baseplate as a template, drill four (4)

holes with the 13/32” drill bit.

4. Using the 3/8”-16 x 1-1/2” hex bolts, 3/8”

lock washers, and 3/8”-16 nut plates,

insert the nut plates into the frame and

align with the holes. Tighten ALL bolts.



BX1120

1997-2006 Jeep Wrangler (Includes Rugged Ridge Double Tube Bumper)

Installation Instructions

292-6041 Rev J Page 5 of 5 6/24/14

CUSTOMER SERVICE COMMITMENT

Blue Ox® is committed to providing you with exceptional customer care throughout your lifetime

with our products. Our team is here to assist you with any questions you may have regarding the

performance of your product. Simply call (402) 385-3051 and you can speak with our customer care

team.

Additionally, please visit our website to see which rallies our Destination America team will be

attending. For a nominal fee, our service technician will service your towing system to ensure it’s in

proper working condition. Also, as a commitment to our customers, should you visit our factory, you

can stay at our full service Blue Ox® campground at no charge along with enjoying a factory tour.

Again, thank you for being our customer and for the condence you have shown in the performance

of our products. It is because of customers like you we enjoy the success we have today.

One Mill Road, Industrial Park

Pender, Nebraska 68047

Phone: (402) 385-3051

Fax: (402) 385-3360

www.blueox.com

5/11/15

Permanent Baseplate Safety Cable Installation

Permanent baseplate safety cables are strongly recommended when towing a vehicle with a tow bar.

The principle function of the permanent baseplate safety cables is to prevent the towed vehicle from

breaking loose in the event the connection between the frame of the towed vehicle and the baseplate

fails or becomes disconnected. The cables must be connected from the baseplate to the frame rail

or cross member of the vehicle’s frame. The illustrations below show the possible arrangements

recommended by Blue Ox®. Each permanent baseplate safety cable must have an adequate weight

rating for the towing system. The weight rating of the two (2) cables together will not qualify.

Do not mount the permanent baseplate safety cables against wires, hoses or brake lines.

These permanent baseplate safety cables should remain installed as long as the baseplate is

installed on the vehicle. Permanent baseplate safety cables are to be used in conjunction with,

and NOT a replacement for legally required safety cables attaching the towed vehicle to the towing

vehicle.

Notice To Baseplate Installer

1. It is YOUR responsibility to watch for:

• Oil cooler and air conditioner lines

• Electrical wires and hoses

• Missing parts or attaching points on the frame

** If the baseplate is improperly installed and is against a wire or hose, it could cause uid leaks or

electrical shorts some time after the actual baseplate installation.

General Information

1. Ensure that your product(s) are registered online at www.blueox.com. It is crucial to register your product(s)

so that you may be alerted of product offerings, updates, upgrades, maintenance and safety bulletins, and/

or recalls.

2. It is the owner’s responsibility to inspect all towing equipment for cracked welds, missing or worn

parts and loose bolts before each towing trip. Be sure to use Loctite®Red on all bolts and tighten to the

recommended specications.

3. It is the owner’s responsibility to hook up all towing equipment per manufacturer’s instructions/

recommendations.

4. Remove the attachment tabs when not in use (if applicable).

Inhaltsverzeichnis

Andere Blue Ox Autozubehör Handbücher

Blue Ox

Blue Ox BX1117 Bedienungsanleitung

Blue Ox

Blue Ox BX7365 Bedienungsanleitung

Blue Ox

Blue Ox ADVENTURER BX7322 Bedienungsanleitung

Blue Ox

Blue Ox BX1120 Bedienungsanleitung

Blue Ox

Blue Ox BX1126 Bedienungsanleitung

Blue Ox

Blue Ox BX3216 Bedienungsanleitung

Blue Ox

Blue Ox BedSaver BXR4502 Bedienungsanleitung

Blue Ox

Blue Ox AVENTA II Bedienungsanleitung

Blue Ox

Blue Ox BX2610 Bedienungsanleitung

Blue Ox

Blue Ox BX3776 Bedienungsanleitung

Blue Ox

Blue Ox BX2800 Bedienungsanleitung

Blue Ox

Blue Ox BX1958 Bedienungsanleitung

Blue Ox

Blue Ox BX2258 Bedienungsanleitung

Blue Ox

Blue Ox BX4102 Bedienungsanleitung

Blue Ox

Blue Ox BX2711 Bedienungsanleitung

Blue Ox

Blue Ox DH2303 Bedienungsanleitung

Blue Ox

Blue Ox bx1126 Bedienungsanleitung

Blue Ox

Blue Ox BX1502 Bedienungsanleitung

Blue Ox

Blue Ox BX8847 Bedienungsanleitung

Blue Ox

Blue Ox BX1681 Bedienungsanleitung

Blue Ox

Blue Ox BX1136 Service-Handbuch

Blue Ox

Blue Ox BX1678 Bedienungsanleitung

Blue Ox

Blue Ox BX2323 Bedienungsanleitung

Blue Ox

Blue Ox BX3775 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung