Blunet MPEG4 4CH DVR Bedienungsanleitung

261Z

DR040_Quick_V1.0

STOPRECPLAY PAUSE FFREW

RECTIMERALARMPLAYHDD HDDFull MENU LISTENTER ZOOMSLOWSEQ

Please read instructions thoroughly before operation and retain it for future reference.

The image shown above may differ from the actual product appearance.

DR040_Quick_V1.0

1. Package Contents

?Digital video recorder (DVR) ?Thermalconductive silicone rubber

?Adapter and power cord ?HDD bracket screws (spare parts)

?Free licensed softwareAP disc ?DSUB PIN connector

?Manual & quick start & IR remote control manual ?AAA size battery *2

?Vertical panel sticker for remote controller (certain models only)

2. FRONT AND REAR PANELS

STOPRECPLAY PAUSE FFREW

RECTIMERALARMPLAYHDD HDDFull MENU LISTENTER ZOOMSLOWSEQ

2.1 Front Panel

1) LED Indication

The following LEDs will be on when:

HDD: HDD is reading or recording

HDD Full: HDD is full

ALARM:Any motion detection is triggered.

TIMER: Timer recording is activated

PLAY: DVR is under playback mode

REC: DVR is under recording mode

: Power is connected

Note: To turn off your DVR, please disconnect the power supply.

2) 1 / 2 / 3 / 4

Press one of these buttons to show the channeldisplayof CH1 ~ CH4 on the monitor.

3) REC

Press this button to activate manual recording.

4) PLAY

Press this button to play the latest recorded video.

5) PAUSE / STOP / REW / FF

Under the playback mode:

Press one of these button to pause / stop / rewind /fast-forward the playback file.

DR040_Quick_V1.0

6) ?+ / ?-/ ?/ ?

Press one of these direction buttons to move the cursor up/down/left/right.

Under the DVR menu mode, these direction buttons can use for the following operation:

??: Make the selection / Change the settings

??: Make the selection

7) MENU

Press this button to enter / exit the DVR menu mode.

In the sub-layer of the DVR menu, press this button to confirm the settings and go back to the upper layer.

8) ENTER

Confirm the password entering.

9) LIST (Event List Search)

To quick search the recorded files by event list, press this button to show all types of theevent lists.

Select one of the event list and press “ENTER”button to playback the selected file.

MANUAL: List the information of the manual-recorded files. The DVR will save one recorded file once any recording setting is changed

SYSTEM: List the information of the system-recorded files. The DVR system will save one recorded file every one hour.

MOTION: List the information of the motion-trigger-recorded files.

TIMER: List the information of the timer-recorded files.

10) SLOW

Under the playback mode, press this button to slowly playback the recorded file (by 1/4 speed or 1/8 speed).

11) ZOOM

In the live mode of the DVR, press this button to enlarge the image of the selected channel.

12) (Quad Display)

Press this button to show the quad display mode on themonitor.

Note: If you want to make a video backup with audio, please connect audio camera to the CH1 which

support the audio function

13) “MENU”+ “ENTER”(Key lock)

Press these two buttons at the same time to lock keys on the DVR front panel.

2.2Rear Panel

1 2 3 4 OUTOUTIN

LINK

ACT.

LANDC 19V

RISKOFELECTRICSHOCK

DONOTOPEN

WARNING:TORED UCETHERISKOFELECTRICSHOCK,

DONOTREMOVE COVER (O RBACK).

NO USER -SERVICEABLE PA RTSINSIDE.

REFER SERVICINGTO Q UALIFIED

SERVICE PERSONN EL.

USB

1) USB Port

To quickly backup or upgrade firmware/OSD, you can insert a compatible USB flash drive into this USB port.

Before using the USB flash drive, please use your PC to format the USB flash drive as “FAT32”first.

2) VIDEO INPUT (1 ~ 4CH)

Connect to video sources, such as cameras.

Note: If you want to make a video backup with audio, please connect audio camera to CH1 which

DR040_Quick_V1.0

supportsthe audio function.

3) VIDEO OUTPUT

Connect to a CRTmonitor for video output.

4) AUDIO IN (1)

Connect to audio source, such as camera equipped with the audio function.

When users start recording, the audio input will also be recorded with corresponding video channel.

Note: The audio source connected to the “Audio 1”will be recorded with the video of the “CH1”.

5) Audio OUT (1)

Connect to a monitor or speaker with 1 mono audio output.

6) LAN

Connect to Internet by LAN cable.

7) LINKACT.

When your DVR is connected to the Internet, this LED will be on.

8) DC 19V

Connect to the supplied adapter.

3. CONNECTIONS AND SETUP

3.1 HDD Installation

The HDD must be installed before the DVR is turned on.

Step 1: Loose the screws on the upper cover and open the upper cover of the DVR.

Step 2: Remove the HDD bracket.

Step 3: Get a suitable brand HDD and set the HDD mode to “Master”mode.

Step 4: Slide and fasten the HDD to the HDD bracket, two screws for each side.

Step 5: Replace the HDD bracket back to the DVRbase.

Step 6: Connect the HDD to the power connector and the IDE BUS connector

(make sure to align the HDD precisely for pin connection).

Step 7: Close the upper cover of the DVR,and fasten all the screws you loosened in Step 1.

3.2 Camera Connection

The cameras must be connected and power-supplied BEFORE the DVR is turned on. The DVR will automatically

detect the video system of the connected camera(s) (NTSC / PAL), and switch itself to the correct system.

Connect the camera with the indicated power supply, and connect the camera video output to the DVR video input

port with a coaxial cable or RCA lines with BNC connectors.

Note: For detailed DVR video input / output ports, please refer to “2.2Rear Panel”at page 3.

For detailed camera operation, please refer to its own manual.

Note: If you want to make a video backup with audio, please connect audio camera to the CH1 which

support the audio function

DR040_Quick_V1.0

3.3Power Setup

This device should be operated only with the type of power source indicated on the manufacturer’s label. Connect

the indicated AC power cord to the power adapter, and plug into an electrical outlet. The power LED “ ” will be on as

green. It takes approximately 10 to 15 seconds to boot thesystem.

3.4Date and Time Setting

Before operating your DVR, please set the date and time on your DVRfirst.

Press the “MENU”button and enter the passwordto go tothe menu list. The default admin password is 0000.

Move the cursor to “DATE”and you can set the date / time / daylight saving in the“DATE”menu list.

3.5Password Setting

Press the “MENU”button and enter the passwordto go to the menu list. Then, move the cursor to “ADVANCE” to

enter theadvanced setting menu.

In the “ADVANCE”menu, move the cursor to “SYSTEM”. Select “PASSWORD”and press the“ENTER”button to

enter the submenu to set thepassword (four digits). The default admin password is 0000.

ADVANCE SYSTEM

CAMERA PASSWORD XXXX

DETECTION RESET DEFAULT RESET

DISPLAY CLEAR HDD HDD-MASTER-1

ALERT UPGRADE START

SYSTEM AUTO KEYLOCK NEVER

NETWORK LANGUAGE ENGLISH

BACKUP VIDEO FORMAT NTSC

HDD INFO VERSION 1167-1012-1022-1017

DR040_Quick_V1.0

4. BASIC OPERATION

4.1 Live Page

In this live page of the DVR, you can see the following icons:

Icon

Function Icon Function Icon Function Icon

Function

Key lock Key unlock 1st live audio

channel

Digital zoom mode

Digital zoom

unselected Timer recordingMotion Recording

4.2Recording

When the recording and the pre-alarm function are activated, this device will overwrite 8GB data from the oldest

for continuous recording without notice.

1) Continuous Recording Icon

When the DVR is properly connected with camera, you can see the icon“ ” (recording) on the monitor.

2) Motion Recording Icon

When the motion / alarm detection is activated, once motion or external alarm happens, you will see the icon

“” (motion) on the monitor.

3) Timer Recording Icon

When the timer record is activated, you will see the icon “ ” (timer) on the monitor

Note: The audio source connected to the “Audio 1”will be recorded with the video of the “CH1”.

4.3Playback

Press the “PLAY” button on theDVR control panel, and the device will playback the latest recorded video.

Note: There must be at least 8192 images of recorded data for playback to work properly. If not, the

device will stop playback. For example, if the IPS is set to 30, the recording time should be at least

205 seconds (8192 images / 40 IPS) for the playback to work properly.

1) Fast Forward / Fast Rewind

You can increase the speed for fast forward and rewind on this device. In the playback mode:

Press “FF“ once to get 4X speed forward and press twice to get 8X speed, etc. Andthe maximum speed is 32X.

Press “REW“ once to get 4X speed rewind and press twice to get 8X speed, etc. And the maximum speed is 32X.

Note: During playback, the image size of the recording (CIF) will be shown on the screen.

2) Pause / Image Jog

Press “PAUSE”button to pause the playback.

In the pause mode:

Press “?”button once to get one frame forward.

Press “?”button once to get one frame rewind.

3) Stop

Pressing “STOP” button under playback mode, the screen of this device will return to live monitoring mode.

DR040_Quick_V1.0

4) Slow Playback

Press “SLOW” button to get 1/4X speed playback and press twice to get 1/8X speed playback.

5) Audio Playback

Use these two buttons to select the live or playback sound of the audio channels.

Icon “”means: Live audio of the 1st audio channel / Icon “”means: Playback audio of the 1st audio channel

Note: If you want to make a video backup with audio, please connect audio camera to CH1 which support

the audio function

4.4 Key Lock and Unlock

1) Key Lock On:

Press “MENU”+ “ENTER”buttons at thesame time on the DVRcontrolpanel to lock keys.

Or set the time-out after which the key lock function is activated (Never / 10 SEC / 30 SEC / 60 SEC). Please refer

to page 19 in your user manual.

2) Key Lock Off:

Enter the DVR password to exit “Key Lock” mode.

Note: For the password setting, please refer to page 6 in your user manual.

4.5 Upgrade

?Firmware / Multilanguage OSD Upgrade

1) Use USB to upgrade firmware or OSD:

Step 1. Format the USB memory device as FAT32 format first.

Step 2. Get the upgrade files from your distributor and save the upgrade files in your USB flash device (do not

change the file name).

Step 3. In the “SYSTEM”menu, move the cursor to“UPGRADE”, andpress “ENTER”button.

Step 4. Select “YES”, and press “ENTER”button again to confirm upgrade.

2) Use AP software to remotely upgrade firmware or OSD:

Step 1. Save the upgrade files atyour PC (do not change the file name) and then login to the AP software.

Step 2. Press “” (Miscellaneous Control) button to show the miscellaneous control panel. In the miscellaneous

control panel, press “” (Tools) buttonon the miscellaneous control panel to enter the AP upgrade

window.

Step 3. Enter the user name, password, IP address and port number of the DVR.

Step 4. Press“Firmware”or “Language”tab as needed, and press “Add” to select the firmware orOSD files to

upgrade.

Step 5. Press“Update Firmware”or “Update Language”button to start theupgrade.

Note: For remote upgrade details, please refer to page 45 in your user manual.

DR040_Quick_V1.0

4.6 Search

1) Search by List

Press “LIST” button on the DVR control panel to show the list for all types of the recorded files. Choose the list

you want to view and press “ENTER”button to start playback.

MANUAL List the information of the manual-recorded files. The DVR will save one recorded file once

any recording setting is changed

MOTION List the information of the motion-trigger-recorded files.

SYSTEM List the information of the system-recorded files. The DVR system will save one recorded

file every one hour.

TIMER List the information of the timer-recorded files.

2) Quick Search by Time

Press the “MENU”button to enter the menu list, move the cursor to“QUICK SEARCH”, and press “ENTER”

buttonto enter the quick time search menu. You can search any specific events by time (Year /Month / Day / Hour

/ Min) and directly play the file you find.

3) Search the Record Event by Log on the AP Software

Press “” (Miscellaneous Control) button to show the miscellaneous control panel. In the miscellaneous control

panel, press “” (Status List) buttonto enter the“Status List”page. In this page, you can see the list of three

differenttypes of recording (User / Motion / Alarm) and press “Play”button to directly playback the file.

Inhaltsverzeichnis

Andere Blunet DVR Handbücher

Blunet

Blunet BL-32960M Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung