Boca Systems BOCALANcard 2000 Bedienungsanleitung
1
Boca’s Family of
Ethernet Products
NE2000-compatible
BOCALANcard 2000
PRODUCT CODE:
BE2000/T
BE2000/2
Installation Guide
2
Boca’s Family of Ethernet Products
3
Before You Begin your Installation
The product you have purchased is designed to
be easily installed into most IBM PC or
compatible systems. Many products have large,
easy-to-read legends to allow for the easy
configuring of the product. This installation
manual contains detailed instructions. Most
included software has automatic installation programs to place the
software correctly onto your computer. However, as all computers are
configured differently, you may be required to perform some basic
DOS or Windows tasks. If you are not familiar with basic DOS
commands such as DIR, CD, or EDIT, you should check your DOS
manual, or seek assistance from you local computer dealer to install
the product.
How to get Technical Assistance
The dealer that you purchased this product or your computer from is
the first place you should go for technical
assistance. The dealer is usually the most
qualified source of help, and is most familiar
with your system and how this product
should be installed. Many dealers have
customer service and technical support programs, with varying levels
of support offered, depending on your needs and computer
knowledge. Please contact the dealer first whenever a problem
occurs.
If your Dealer Can’t Assist you
If you can’t get assistance from your dealer, the manufacturer
provides varying levels of technical assistance as summarized on the
following page.
4
Boca’s Family of Ethernet Products
The Standard Free Technical Support number is for quick answers to
specific inquiries on product features and technical questions (call
407-241-8088; M-F, 8 am to 6:30 pm EST). Direct access to technical
support representatives is provided on a limited basis. If you require
immediate attention or in-depth help with the installation of the
product, please call our 900-priority support number for service. This
number gives you immediate access to senior-level technicians. The
number is 900-555-4900. You will be charged $2.00 per minute. The
charges will appear on your next phone bill.
Damaged or Missing Items
We use many world-class quality assurance programs to ensure the
product you purchased is of the highest caliber. Sometimes, however,
a component may be missing from the box, or is damaged or corrupt
in some way. If this happens, immediately return the entire package
to your place of purchase so you may exchange it for a new one. Your
dealer should be able to provide you with an exchange far more
quickly than by contacting us directly. If for some reason you are
unable to return the product directly to its place of purchase, refer to
the “Servicing Your Product” and “Warranty” sections in this manual
for instructions.
On-Line Support!
CompuServe: GO BOCA
Internet:
email: [email protected]
World-wide on the WEB:
http://[email protected]
Standard Free
Technical Support
407-241-8088
Priority Service
900-555-4900
($2 per minute)
2
3
1
4
5
6
79
8
2
3
1
4
5
6
79
8
Technical Support
Fax
407-997-0918
AutomatedFax
Retrieval System
407-995-9456
Boca BBS
407-241-1601
5
Contents
The Contents of Your Package.............................................. 6
Quick Start (for Experienced Users) ................................... 7
Section One: Introduction...................................................... 9
Section Two: Installation and Configuration ................ 10
2.1 Inserting the Adapter .............................................. 10
2.2 Adapter Configuration ............................................ 13
2.2.1 Single Board..................................................... 13
2.2.2 Multiple Board ................................................ 13
2.3 The BENCFG.EXE Program.................................... 14
Section Three: Troubleshooting......................................... 16
Appendix A: Specifications................................................. 20
Appendix B: Pin Assignments............................................ 21
Appendix C: NET.CFG Options for NetWare................ 22
Appendix D: Installing Boot ROMs ................................. 25
Appendix E: FCC Compliance ............................................ 27
Appendix F: Servicing Your Boca Product...................... 28
6
Boca’s Family of Ethernet Products
Boot ROM
socket
RJ-45
GREEN LED (LNK/
RECEIVE)
RED LED (TRANSMIT)
BE2000/T
12
12
12
Boot ROM socket
BNC T-
Connector
Installation Guide
Boca’s Family of
Ethernet
Products
installation
guide
GREEN LED (LNK/RECEIVE)
RED LED (TRANSMIT)
RJ-45
BNC
BE2000/2
3.5-inch
diskette
Installation Guide
Boca’s Family of
Ethernet
Products
installation
guide
3.5-inch
diskette
The Contents of Your Package
The contents of the Boca Research Ethernet product package
are listed below. If any items are missing or appear incomplete
or damaged, contact your dealer for assistance.
7
Quick Start (for Experienced Users)
This section is intended for knowledgeable and experienced
network installers who will be using the default settings.
Other Items You May Need to Complete the
Installation:
• Suitable tools to install the BOCALANcard Ethernet Adapter
in your computer.
• Some network operating systems require some of their
original installation diskettes. See your network installation
manuals.
Hardware Installation
The default settings for the adapter are as follows:
If you need to change any of the default settings, refer to
Section Two for instructions. Otherwise, insert the adapter into
a 16-bit slot.
Quickstart
IRQ 3
Base I/O Address 300h
Memory Address Boot ROM disabled
8
Boca’s Family of Ethernet Products
Note on NE2000
The BOCALANcard 2000 is compatible with existing NE2000
drivers shipped with the Novell operating system.
Troubleshooting
If the adapter does not function after you have installed it with
the necessary software, be sure the adapter is seated firmly and
that you have set all options correctly. If you still have
difficulty, refer to Section Three: Troubleshooting.
9
Section One: Introduction
The BE2000 products allow you to connect the IBM personal
computer ISA-bus (or compatible) to an Ethernet network. The
10Base-T adapter (BE2000/T) provides an RJ45 for connecting
to an unshielded twisted-pair network (10Base-T). The Combo
Ethernet adapter (BE2000/2) provides this plus a 10Base2 BNC
connector to attach to thin coax.
Features of the BOCALANcard Ethernet Adapter:
• Compliant with ISO/ANSI IEEE 802.3 specifications
• High-performance, highly integrated one-chip solution
• On-board support for connecting to a 10Base-T network
(BE2000/T) or 10Base2 (BE2000/2).
• Designed to work with 286, and high-speed 386 and 486-
based systems
• Jumperless adapter—all features such as interrupt channel,
memory address, and I/O address are software-selectable.
• Easy installation and maintenance.
• Uses existing NE2000 drivers—no need to install new
drivers.
• Low-cost solution for networks requiring 10Base-T or
10Base2 connection.
• One link/receive status LED indicator and one transmit
status LED indicator.
• NE2000-compatible.
Introduction
10
Boca’s Family of Ethernet Products
Section Two: Installation and Configuration
The BOCALANcard Ethernet Adapter is compatible with
network hardware which complies with IEEE Ethernet 802.3
standards. The BE2000/T offers a twisted-pair connector while
the BE2000/2 offers this plus a BNC connector.
2.1 Inserting the Adapter
Removing the System Cover
These instructions assume an AT-style or compatible machine.
1. Power-down your system and remove the power cord.
2. Use a screwdriver to remove the screws which hold the cover
in place. Obviously, locations and types of screws as well as
type of case cover will vary based on your particular system.
Refer to your computer system documentation for assistance.
3. Carefully slide the cover forward—away from the rear panel.
Be careful not to let the cover catch on internal cables to disk
drives, controllers, or the power supply.
Inhaltsverzeichnis
Andere Boca Systems PCI-Karte Handbücher
Beliebte PCI-Karte Handbücher anderer Marken
Conrad Electronic
Conrad Electronic 97 46 71 Bedienungsanleitung
Micro Innovations
Micro Innovations USB650A Bedienungsanleitung
KTI Networks
KTI Networks KF-310 Bedienungsanleitung
Asus
Asus SpaceLink WL230 Bedienungsanleitung
SIIG
SIIG SC2475 Bedienungsanleitung
TRENDnet
TRENDnet TEW-703PI Bedienungsanleitung
Belkin
Belkin F5D7000F Bedienungsanleitung
Pericom
Pericom PI7C7100 Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-3548 Bedienungsanleitung
Digium
Digium TE200 Series Bedienungsanleitung
Allo.com
Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung
Western Digital
Western Digital FireWire PCI Adapter Bedienungsanleitung