Bosch BDS3210 Bedienungsanleitung

Robert Bosch GmbH

72757 Reutlingen

Germany

www.bosch-ebike.com

0 275 U07 3S1 (2021.06) T / 26

en Original operating instructions

fr Notice d'utilisation d'origine

es Instrucciones de servicio originales

Ownerʼs Manual – The Bosch Drive System

Display Mount

BDS3210 | BDS3250 | BDS3620 | BDS3630

This manual contains important safety,

performance and service information.

Read and understand it along with the

information provided to you by your

bicycle manufacturer before using the

product, and keep it for reference.

Cette notice contient d'importantes

informationes sur la sécurité, les

performances et l'entretien. Lisez-les et

comprenez-les ainsi que les informations

fournies par le fabricant de votre vélo

avant d'utiliser le produit, et conservez-

les pour référence ultérieure.

Este manual contiene información

importante de seguridad, rendimiento y

mantenimiento. Léalo y asegúrese de

entenderlo junto con la información que

le ha facilitado el fabricante de su

bicicleta antes de usar el producto;

guárdelo a modo de referencia.

0 275 U07 3S1 | (08.06.2021) Bosch eBike Systems

English – 1

Table of contents

Introduction ..................................................................................................................................... 2

About Warnings............................................................................................................................ 2

General Warnings ......................................................................................................................... 2

Using your Manual ........................................................................................................................ 3

Operating your Bosch Display Mount.................................................................................................... 4

Safety instructions........................................................................................................................ 4

Product description and specifications ............................................................................................ 5

Fitting......................................................................................................................................... 6

Maintenance and cleaning.............................................................................................................. 8

Bosch eBike Systems 0 275 U07 3S1 | (08.06.2021)

English – 2

Introduction

About Warnings

This manual contains many DANGER, WARNING,

and CAUTION indicators concerning the conse-

quences of failure to use, assemble, maintain, store,

inspect and dispose of a Bosch-equipped eBike in a

safe manner.

– The combination of the safety alert symbol and the

word DANGER indicates a hazardous situation

that, if not avoided, will result in death or serious

injury.

– The combination of the safety alert symbol and the

word WARNING indicates a hazardous situation

that, if not avoided, could result in death or serious

injury.

– The combination of the safety alert symbol and the

word CAUTION indicates a hazardous situation

that, if not avoided, could result in minor or moder-

ate injury.

General Warnings

Read all safety warnings and all in-

structions. Failure to follow the warn-

ings and instructions may result in

death or serious injury.

Save all safety warnings and instructions for fu-

ture reference.

The term battery pack used in these operating in-

structions refers to all original Bosch eBike battery

packs.

WARNING

uThis manual contains important safety, perfor-

mance and service information. Read it before

you take the first ride on your new bicycle, and

keep it for reference. The manual can also be found

online at www.bosch-ebike.com.

uThis manual is intended to be read together with

the separate user manual provided with your bi-

cycle. Be sure to read all provided documents in-

cluding labels on the product before your first ride.

uRead ALL accompanying manuals before riding

the bike for the first time. Your Bosch Drive Sys-

tem comes with additional manuals and documents

provided by the manufacturer of the bicycle and

other components. Failure to read and understand

safety information can result in death or serious in-

jury.

uTake responsibility for your own SAFETY. If you

have any questions or do not understand some-

thing, consult with your dealer or the bicycle or

component manufacturer.

uSome eBike accessories may present a choking

hazard to small children. Keep these accessories

away from children.

CAUTION

uThe Bosch Drive System adds weight to your bi-

cycle which you may not be used to lift. Avoid in-

jury, use proper lifting techniques.

0 275 U07 3S1 | (08.06.2021) Bosch eBike Systems

English – 3

Using your Manual

In addition to the functions outlined here, changes to

software relating to troubleshooting and functional

modifications may be introduced at any time.

Graphics

The bicycle shown in this manual may differ slightly

from your bicycle, but will be similar enough to help

you understand our instructions.

RIGHT-HAND and LEFT-HAND sides are determined

by facing in the direction the bicycle will travel when

going forward. When you see a broken line (------), the

item referred to is hidden from view.

Bosch eBike Systems 0 275 U07 3S1 | (08.06.2021)

English – 4

Operating your Bosch Display Mount

Safety instructions

Read all the safety information and

instructions. Failure to observe the

safety information and follow instruc-

tions may result in electric shock, fire

and/or serious injury.

Save all safety warnings and instructions for fu-

ture reference.

uThe contact surfaces of the display holder may

become very hot (>140°F). Allow the contact

surfaces to adjust to the ambient temperature

before you touch them. This is particularly impor-

tant when using a SmartphoneGrip.

uKeep swallowable small parts away from small

children. There is a risk of serious injury.

uNever short-circuit the pins. The display holder

may be irreparably damaged and must then be re-

placed.

uEnsure that the contacts are free of dirt. By do-

ing this, you prevent malfunctions or damage.

uAfter a fall, check the display holder for sharp

edges. Replace it if required.

uDo not stand your bicycle upside down on its

saddle and handlebars if the on-board computer

or its holder protrude from the handlebars. This

may irreparably damage the on-board computer or

the holder. Also remove the on-board computer be-

fore placing the bicycle on a wall mount to ensure

that the on-board computer does not fall off or be-

come damaged.

uObserve all national regulations which set out

the approved use of eBikes.

uRead and observe the safety warnings and in-

structions in all operating instructions of the

eBike system and your eBike.

0 275 U07 3S1 | (08.06.2021) Bosch eBike Systems

English – 5

Product description and specifications

Product Features Display Mount

(1)

(3)

(7)

(6)

(5)

(4)

(2)

(9)

(8)

(1) Display mount

(2) Adapter tray

(3) Clamp for holder

(4) Clamp screw

(5) Round rubber spacer

(6) 1-arm socket

(7) Screw for adjusting tilt

(8) Removal blocker

(9) Snap-in hook

(10) Connection cables

(11) Fastening screws for display mount

The display mount(1) can also be embedded in the

bicycle design.

Bosch eBike Systems 0 275 U07 3S1 | (08.06.2021)

English – 6

Intended use

The display holder is intended to establish the me-

chanical and electrical connection to a display or on-

board computer.

Only original Bosch eBike components can be con-

nected to the display holder.

A display holder is not required for an eBike system to

function.

Technical data

Display holder

Product code BDS3210

BDS3250

BDS3620

BDS3630

Output voltage V 4.75 to 5.4

Output current, max. A 1.5

Operating temperature °F 23 to 104

Storage temperature °F 50 to 104

Protection rating IP54

Fitting

Installation positions (seefigureA)

A➀ ➁ ➂

The 1-arm socket can be mounted at three different

positions on the handlebars:

– In front of the handlebars ➀

– Over the stem ➁

– In the triangle between the stem and handlebar ➂

Note: In order to ensure clean cable routing, the ap-

propriate display mount must be used for each of the

three different positions: The BDS3210 display

mount for in front of the handlebars (electrical con-

nections at the rear); the BDS3250 display mount for

over the stem or in the triangle between the stem and

handlebar (electrical connections at the front).

If you want to change the installation position and you

have the correct display mount(1), you must first re-

move the 1-arm socket(6) and re-mount it after-

wards.

Note: Please be aware that there are two different

handlebar diameters (31.8mm and 35mm). Your bi-

cycle retailer will help you to select the correct com-

ponents.

Mounting the display mount (seefigureB)

(1)

(2)

(10) (11)

(1) Display mount

(2) Adapter tray

(10) Connection cables

(11) Fastening screw for display mount

Insert the display mount(1) into the adapter tray(2).

Ensure that it is in the required installation position.

Secure the display mount(1) from below using the

screws(11). When doing so, be aware of the torque

specified on the adapter tray(2).

Connect the connection cables that come out of the

drive unit and the operating unit. It does not matter

which cable is connected to which connection for the

functions to work. When connecting the cables, en-

sure that the markings on the connector and on the

cable match.

0 275 U07 3S1 | (08.06.2021) Bosch eBike Systems

English – 7

Securing on the handlebars (seefigureC)

(3)

(5)

(4) (7) (5)

(6)

(3) Clamp for holder

(4) Clamp screw

(5) Round rubber spacer

(6) 1-arm socket

(7) Screw for adjusting tilt

Note: The display holder must only be secured in the

cylindrical area of the handlebars and not in the ta-

pered area. To clamp a display in the center, the han-

dlebars must have a cylindrical area of at least 90mm

in width.

Open the clamp and bring the 1-arm socket(6), to-

gether with the round rubber spacer(5), into the re-

quired position. Gently tighten the clamp screw(4)

so that the 1-arm socket(6) can still move.

Adjust the tilt for the display mount by loosening and

tightening the screw(7). Preferably adjust the tilt

without the display or on-board computer.

In the connection between the 1-arm socket(6) and

the adapter tray, there are interlocking teeth, which

means that it is only possible to align the adapter tray

in predefined positions. Before tightening the

screw(7), make sure that the teeth engage in one an-

other correctly. In addition, be aware of the torque

specified on the 1-arm socket(6).

Bring the 1-arm socket(6) into its final position and

tighten the clamp screw(4). Be aware of the torque

specified on the 1-arm socket(6) here too.

Thanks to the round rubber spacer(5), it is possible

to move the 1-arm socket(6) in all directions.

Removal blocker

A device attached to the display holder can be se-

cured using the removal blocker(8). Usage is de-

scribed in the operating instructions for the respec-

tive device.

Bosch eBike Systems 0 275 U07 3S1 | (08.06.2021)

English – 8

Maintenance and cleaning

The display holder must not be cleaned with pressur-

ized water.

Use a soft cloth dampened only with water for clean-

ing. Do not use cleaning products of any kind.

uOnly have repairs performed by a certified bicy-

cle dealer.

After-sales service and advice on using

products

If you have any questions about the eBike system and

its components, contact an authorized bicycle dealer.

For contact details of authorized bike dealerships,

please visit www.bosch-ebike.com.

Disposal

Please return Bosch eBike components that are no

longer usable to an authorized bicycle dealer.

Do not dispose of eBikes and their components with

household waste.

0 275 U07 3S1 | (08.06.2021) Bosch eBike Systems

Andere Handbücher für BDS3210

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Bosch Rack & Stand Handbücher

Bosch

Bosch FBH 0000 A Bedienungsanleitung

Bosch

Bosch PTA 2400 Bedienungsanleitung

Bosch

Bosch UB-10DB Installations- und Betriebshandbuch

Bosch

Bosch T4B Montageanleitung

Bosch

Bosch GTA 60 W Professional Bedienungsanleitung

Bosch

Bosch FlexiDome VDA-CMT-Dome Bedienungsanleitung

Bosch

Bosch VG4-A-9543 Bedienungsanleitung

Bosch

Bosch FPM-5000-KMC Bedienungsanleitung

Bosch

Bosch TS1017 Bedienungsanleitung

Bosch

Bosch FLEXIDOME NDA-FMT-MICDOME Bedienungsanleitung

Bosch

Bosch HMP 0002 A Bedienungsanleitung

Bosch

Bosch RM 10 Kurzanleitung

Bosch

Bosch MBE Series Bedienungsanleitung

Bosch

Bosch RA1165 Montageanleitung

Bosch

Bosch GTA 600 Professional Bedienungsanleitung

Bosch

Bosch GTA500 Montageanleitung

Bosch

Bosch PTA1000 Bedienungsanleitung

Bosch

Bosch GTA500 Montageanleitung

Bosch

Bosch S 500 A PROFESSIONAL Bedienungsanleitung

Bosch

Bosch GTA50W Montageanleitung

Bosch

Bosch GTA 2600 Professional Bedienungsanleitung

Bosch

Bosch GTA 3700 Bedienungsanleitung

Bosch

Bosch SCT 815 S4 Bedienungsanleitung

Bosch

Bosch HMP 0001 A Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung