Boser HS-4705 Bedienungsanleitung
HS-4705
400MHz FSB Pentium®M
Embedded Engine Board
•400MHz FSB•DDR•PCI Slot•
•CRT/LVDS Panel•Giga LAN•
•Audio•ATA/33/66/100•IrDA•
•USB2.0•WDT•H/W Monitor•
•Industrial Embedded Engine Board•
Copyright Disclaimers
The accuracy of contents in this manual has passed thorough checking and review
before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is
not liable for any infringements of patents or other rights resulting from its use. The
manufacturer will not be responsible for any direct, indirect, special,
incidental or consequential damages arising from the use of this product or
documentation, even if advised of the possibility of such damage(s).
This manual is copyrighted and BOSER Technology Co., Ltd. reserves all
documentation rights. Unauthorized reproduction, transmission, translation,
and storage of any form and means (i.e., electronic, mechanical, photocopying,
recording) of this document, in whole or partly, is prohibited, unless granted
permission by BOSER Technology Co., Ltd.
BOSER Technology Co., Ltd. reserves the right to change or improve the
contents of this document without due notice. BOSER Technology Co., Ltd.
assumes no responsibility for any errors or omissions that may appear in this
manual, nor does it make any commitment to update the information contained
herein.
T
T
Tr
r
ra
a
ad
d
de
e
em
m
ma
a
ar
r
rk
k
ks
s
s
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
AMI is a registered trademark of AMI Software, Inc.
All other trademarks, products and or product names mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2004 BOSER Technology Co., Ltd.
All Rights Reserved.
Edition 1.0, March 17, 2004
Table of Contents
Chapter 1 Gerneral Description…………………….1
1.1 Major Features ..............................................................2
1.2 Specifications ...............................................................2
1.3 Board Dimensions........................................................4
Chapter 2 Unpacking………………………………..5
2.1 Opening the Delivery Package....................................5
2.2 Inspection......................................................................5
Chapter 3 Hardware Installation…………………...7
3.1 Before Installation ........................................................7
3.2 Board Layout ................................................................8
3.3 Jumper List ...................................................................9
3.4 Connector List ..............................................................9
3.5 Configuring the CPU ..................................................10
3.6 System Memory ..........................................................10
3.7 VGA Controller............................................................10
3.8 PCI E-IDE Drive Connector........................................11
3.9 Floppy Disk Drive Connector ....................................14
3.10 Serial Port Connectors...............................................15
3.11 Parallel Connector......................................................15
3.12 Ethernet Connector ....................................................16
3.13 USB Connector ...........................................................16
3.14 CMOS Data Clear ........................................................17
3.15 Power and Fan Connectors.......................................17
3.16 Keyboard/Mouse Connectors ...................................18
3.17 System Front Panel Connectors...............................18
3.18 Audio Connectors ......................................................19
3.19 IrDA Connector ...........................................................19
3.20 Watchdog Timer..........................................................19
Chapter 4 Award BIOS Setup……………………..21
4.1 Starting Setup .............................................................21
4.2 Using Setup.................................................................22
4.3 Main Menu ...................................................................23
4.4 Standard CMOS Setup ...............................................24
4.5 Advanced CMOS Setup..............................................25
4.6 Advanced Chipset Setup ...........................................26
4.7 Power Management Setup.........................................27
4.8 PCI / Plug and Play Setup ..........................................28
4.9 Peripheral Setup .........................................................29
4.10 PC Health Status.........................................................30
4.11 Frequency/Voltage Control........................................30
Chapter 5 Software Utilities……………………….31
5.1 IDE Driver Installation ................................................31
5.2 VGA Driver Installation...............................................38
5.3 LAN Driver Installation...............................................41
5.4 Audio Driver Installation ............................................50
5.5 USB2.0 Driver Installation..........................................53
Safety Instructions
Integrated circuits on computer boards are sensitive to static electricity.
To avoid damaging chips from electrostatic discharge, observe the
following precautions:
Do not remove boards or integrated circuits from their anti-static
packaging until you are ready to install them.
Before handling a board or integrated circuit, touch an unpainted portion
of the system unit chassis for a few seconds. This helps to discharge any
static electricity on your body.
Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components. Fasten the ALLIGATOR
clip of the strap to the end of the shielded wire lead from a grounded
object. Please wear and connect the strap before handling the HS-4705
to protect yourself from the discharge of any static electricity through the
strap.
Please use an anti-static pad when putting down any components or
parts or tools outside the computer. You may also use an anti-static bag
instead of the pad. Please inquire from your local supplier for additional
assistance in finding the necessary anti-static gadgets.
NOTE: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENT WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
1
Chapter 1
General Description
The HS-4705 is an Intel®82855GME/ICH4 chipset-based board
designed for PCI Bus PGA 479 Intel®Pentium®M 1.2~1.7GHz CPU
compatibility. These features combine and make the HS-4705 an ideal
all-in-one industrial single board computer. Additional features include
and enhanced I/O with CRT/LVDS Panel, Giga LAN, audio and
USB2.0 ports interface.
Its onboard ATA/33/66/100 to IDE drive interface architecture allows
the HS-4705 to support data transfers of 33, 66 or 100MB/sec. to each
IDE drive connection. Designed with the Intel®82855GME/ICH4 core
logic chipset, the board supports all PGA 479 Pentium®M CPU series
operating 1.2~1.7GHz. The display controller is Intel®82855GME
supporting CRT display up to 1600 x 1200, and also provides 24-bit
single channel LVDS panel interface.
System memory is also sufficient with one DDR socket that can support
up to 1GB.
Additional onboard connectors include an advanced USB2.0 port
providing faster data transmission, and one RJ-45 connector for
10/100 Base-TX Ethernet use.
2
1.1 Major Features
The HS-4705 comes with the following features:
PGA 479 for Intel®Pentium®M 1.2~1.7GHz
Supports 400MHz FSB
One DDR socket with a max. capacity of 1GB
Intel®82855GME/ICH4 system chipset
Winbond W83627HF super I/O chipset
Intel 82855GME CRT display controller
Intel 82540 100/1000 Based LAN
AC97 3D audio controller
Fast PCI ATA/33/66/100 IDE controller
Two COM, six USB2.0 connectors
Supports LVDS Panel interface
Supports Hardware Monitor function
1.2 Specifications
CPU: PGA 479 for Intel®Pentium®M 1.2~1.7GHz
Bus Interface: PCI Bus
Front Side Bus: Supports 400MHz FSB
Memory: One DDR socket supporting up to 1GB (DDR-200/DDR-266)
Chipset: Intel®82855GME/ICH4
I/O Chipset: Winbond W83627HF
PCI Slot: One standard PCI slot
VGA: Intel 82855GME supporting CRT display up to 1600 x 1200
Panel Display: Supports 24-bit single channel LVDS Panel interface
LAN: Intel®82540 100/1000 Based LAN
Audio: AC97 3D audio controller
IDE: Four IDE disk drives supporting ATA/33/66/100 and with transfer
rates of up to 33/66/100MB/sec.
FDD: Supports one slim floppy disk drive
3
Parallel: One enhanced bi-directional parallel port supporting
SPP/ECP/EPP
Serial Port: 16C550 UART-compatible RS-232 x 2 serial ports with
16-byte FIFO
IrDA: One TX/RX IrDA header
USB: Supports six USB2.0 connectors
Keyboard/Mouse: PS/2 6-pin Mini DIN
BIOS: Award PnP Flash BIOS
Watchdog Timer: Software program time-out intervals from 1~256
sec.
CMOS: Battery backup
Power Connector: One 8-pin +5V/+12V ATX power connector
Temperature: 0~60°C (operating); -20~+80°C (storage)
Humidity: 10~90%; non-condensing (operating)
Hardware Monitor: Winbond W83627HF
Board Size: 20.3 x 14.6 cm
4
1.3 Board Dimensions
Inhaltsverzeichnis
Andere Boser PCI-Karte Handbücher
Beliebte PCI-Karte Handbücher anderer Marken
Conrad Electronic
Conrad Electronic 97 46 71 Bedienungsanleitung
Micro Innovations
Micro Innovations USB650A Bedienungsanleitung
KTI Networks
KTI Networks KF-310 Bedienungsanleitung
Asus
Asus SpaceLink WL230 Bedienungsanleitung
SIIG
SIIG SC2475 Bedienungsanleitung
TRENDnet
TRENDnet TEW-703PI Bedienungsanleitung
Belkin
Belkin F5D7000F Bedienungsanleitung
Pericom
Pericom PI7C7100 Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-3548 Bedienungsanleitung
Digium
Digium TE200 Series Bedienungsanleitung
Allo.com
Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung
Western Digital
Western Digital FireWire PCI Adapter Bedienungsanleitung