B+K precision 600 Bedienungsanleitung

12V SLA

Battery Capacity

Analyzer

INSTRUCTION

MANUAL

Refer to the Front view of the unit.

1) AH Range : With this key the user can select the

correct AH range according to the battery

under test.

2) Select LED:This LED glows toindicate that user can

select the AH range.

3) Locked LED:This LED is ON when the unit locks to a

particular AH range set by the user.

4) Display Mode:This key selects the display either as

No load voltageor % balance

capacity.

5) Batt. Voltage:When displayindicates Batt. voltage this

LED glows.

6) % Balance Capacity:This LED glows when remainingcapacity

is displayed.

7) Load Test:The test startsby pressing this key.

8) Ready:When this LED glows steadily, it indicates

thatthe unit is ready to conduct a test.

9) Test On: This LED glows for approx. 2 sec. when

the battery test is carried out.

10) Reverse Polarity:If the unitis connected to a battery in

reversepolarity this LED

2.2 OPERATING PROCEDURE

Follow the steps as outlined below :

2.2.1 Connection Procedure Connect Battery Capacity

Analyser (600) to Battery UnderTest(BUT). Connect the

+ve terminal of 600 to +ve terminal of Battery. Connect-ve

terminal of 600 to –ve terminal of Battery. The 600 will be

powered with the BUT. On Power up, 600 performs a self

test by turning on the 7 segments, LEDs one after another

& finally flashing the version number.

Caution: Do not connect the +ve terminal of 600 to _ve

terminal of BUT and _ve terminal fo 600 to +ve terminal of

BUT. On doing so, the ‘Reverse Polarity’ LED glows as

shown.

2.2.2 Selecting AH Capacity

Press the 'AH Range' key. The select LED glows as

shown.

The display will show the last selected/stored AH value.

(Power ON default value is 7 AH)

To change the value to say 100 AH press the key again.

Display shows new value. Keep on pressing till the

desired AH is obtained.

To Lock the AH capacity, either press any key OTHER

than the AH Range key OR wait for about 10 seconds.

Your selected AH value

will automatically get lockedLocking is indicated by the

glowing of 'Locked' LED.

2.2.3 Conducting a Test

Test can be conducted any time by pressing the “Load

Test” key.

By doing so the ‘Test On’ LED starts glowing.

Typically, it glows for about 2 seconds. Thereafter the

‘Ready’ test starts blinking.

(The blinking time depends on the AH range slsected).

Thereafter it becomes steady.

Note: User cannot conduct a test while the ‘Ready’ LED is

blinking.

2.2.4 Observing Result After a Test

By default the Batt. Voltage is displayed on the display. To

observe the Balance Capacity left, press the ‘Display Mode’

switch.

The display will show the capacity in percentage.

Note: Balancce Capacity can have a meaningful value only after

conduction of a test. At power on, a value of 0 is shown. Hence

Balance Capacity should be seen only after conduction of a

test. To observe No Load Batt. Voltage, press the ‘Display

Mode Key’. The display willshow the No Load Batt. Voltage.

2.3 CAUTION

1) Do not connect Model 600 to a voltage source more than 20V.

2) Do not connect the unit to a battery connected in circuit.

Andere Handbücher für 600

Andere B+K precision Messgerät Handbücher

B+K precision

B+K precision 2530B Bedienungsanleitung

B+K precision

B+K precision 885 Bedienungsanleitung

B+K precision

B+K precision 4063 Bedienungsanleitung

B+K precision

B+K precision 313C Bedienungsanleitung

B+K precision

B+K precision 889B Bedienungsanleitung

B+K precision

B+K precision 2652A Bedienungsanleitung

B+K precision

B+K precision 467 Bedienungsanleitung

B+K precision

B+K precision 5335C Bedienungsanleitung

B+K precision

B+K precision 601B Bedienungsanleitung

B+K precision

B+K precision 5335B Bedienungsanleitung

B+K precision

B+K precision SEFRAM 7861 Bedienungsanleitung

B+K precision

B+K precision 2831E Bedienungsanleitung

B+K precision

B+K precision 2831C Bedienungsanleitung

B+K precision

B+K precision 467 Bedienungsanleitung

B+K precision

B+K precision 2708B Bedienungsanleitung

B+K precision

B+K precision DAS240-BAT Bedienungsanleitung

B+K precision

B+K precision 830C Bedienungsanleitung

B+K precision

B+K precision Sefram DAS1800 Bedienungsanleitung

B+K precision

B+K precision 2165A Bedienungsanleitung

B+K precision

B+K precision Sefram DAS240 Handbuch

B+K precision

B+K precision 5335B Bedienungsanleitung

B+K precision

B+K precision BA8100 Bedienungsanleitung

B+K precision

B+K precision 308A Bedienungsanleitung

B+K precision

B+K precision DAS30 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung