Bradford White RTG 199HE Bedienungsanleitung

Installation Instructions

Models: RTG 199HE / RTG 199ME

Outdoor kit

Warning: This kit must be installed by a qualified

installer in accordance with these instructions and all

applicable codes and requirements of the authorities

having jurisdiction.

6 720 811 755 (2014/05) US

Key to symbols and safety instructions

Outdoor kit – 6 720 811 755 (2014/05)

1 Key to symbols and safety instructions

1.1 Key to symbols

Warnings

The following keywords are defined and can be used in this

document:

•DANGER indicates a hazardous situation which, if not

avoided, will result in death or serious injury.

•WARNING indicates a hazardous situation which, if not

avoided, could result in death or serious injury.

•CAUTION indicates a hazardous situation which, if not

avoided, could result in minor to moderate injury.

•NOTICE is used to address practices not related to

personal injury.

Important information

Additional symbols

2 Outdoor Installation

2.1 Warnings

Warnings in this document are identified by

a warning triangle printed against a grey

background.

Keywords at the start of a warning indicate

the type and seriousness of the ensuing risk

if measures to prevent the risk are not taken.

Thissymbolindicatesimportantinformation

where there is no risk to people or property.

Symbol Explanation

▶ Step in an action sequence

Cross-reference to another part of the

document

• List entry

– List entry (second level)

Table 1

DANGER:

The top of the outdoor kit will get very hot

during operation.

▶ Keep away from children. Install heater

in a location where the top of the kit

cannot be reached by small children.

DANGER: Flue gas is very hot and contains

carbon monoxide.

Flue gas will be released through the

outdoor kit.

▶ The outdoor kit cannot be installed on a

water heater mounted indoors. To

preventrisk of fire and carbonmonoxide

poisoning, maintain all clearances

indicated in these instructions.

DANGER:

▶ Do not place or store any combustible

material within 5 feet of the appliance.

Maintain specified clearance to

combustibles on the wall where the

appliance is installed and any adjacent

walls or overhang. Observe all

clearances required in this manual.

DANGER:

▶ Surface temperature of the kit is less

than 140 °F, except highest top surface

which may reach 300 °F.

DANGER:

▶ Do not mount water heater directly onto

vinyl siding, see Fig. 10.

Selecting heater location

Outdoor kit – 6 720 811 755 (2014/05)

2.2 This outdoor kit includes:

• Supports (2) with screws

• Sealing gasket

• Control panel shield

• Outdoor vent cap.

3 Selecting heater location

Beforeproceeding,readthe water heater installation manual. If

the information in that manual is not followed exactly, a fire,

explosion or poisoning by carbon monoxide may result causing

property damage, personal injury or death.

▶ This appliance is not designed to be installed outdoors in

climates that commonly fall below freezing (32 °F).

▶ Choose an outside wall for the installation. Installation on a

wall protected by an overhang above is recommended.

▶ Size the water and gas connections according to the

instructions in the water heater installation manual. Use

unions when connecting both water lines and gas supply

line to the heater.

3.1 Minimum clearances

If the appliance is installed under an overhang, there must be a

minimum 36” clearance from the top of the appliance and the

mounting area must be open in front and on the sides of the

appliance.

Fig. 1

DANGER:

The freeze prevention kit on the appliance is

designed to provide protection from

temperatures down to approximately 5 °F

for short term conditions only. It will not

protect the appliance in areas where the

temperature is routinely expected to be

belowfreezing.Thefreezepreventionkitwill

not protect plumbing outside the appliance

from freezing. Precautions must be taken:

▶ Always drain the water heater if it will be

exposed to long term freezing

conditions.

DANGER:

The water in this appliance is cold and

always remains cold except for the times

when the burner is on.

▶ In the event of power outage in

conjunctionwithfreezing temperatures,

it is recommended that the heater be

drained.

DANGER:

▶ Damage to the appliance from freezing

is not covered under the manufacturer's

warranty. Ref. Description

Min.

distances

A Directly below or adjacent to an

opening; operable windows, doors and

any fresh air openings

1 ft

D From any adjacent wall 1 ft

E Below a gutter, sanitary pipework,

eaves or overhang

3 ft

F Above ground 1 ft

G From a gas meter or gas regulator 3 ft

Table 2 Clearances

Best practice note: The clearances in Fig. 1

and table 2 are the minimum allowed by the

standard.

When possible consider maximizing the

clearances A, B, C, D and E to allow for the

effects of wind and frequently used door and

window openings.

Installing outdoor kit

Outdoor kit – 6 720 811 755 (2014/05)

4 Installing outdoor kit

4.1 Replace the control panel shield

▶ Loosen the two Philips head screws located on bottom rear

of cover (see Fig. 2).

Fig. 2 Loosen the two screws

▶ Remove the front cover panel and replace the original

control panel shield with shield provided in the kit, see Fig.

Fig. 3 Replace the control panel shield

▶ After replacing the control panel shield re-position the

front cover.

▶ 1. Remove the cover plate (A) from the top of the

appliance, as shown in Fig. 4.

Fig. 4

▶ 2. Attach the supports (B) to the appliance with the four

provided screws, as shown in Fig. 4.

Before mounting the outdoor kit on the appliance:

Remove the exhaust seal from outdoor vent cap:

For condensing appliances only:

▶ Remove inner seal, see Fig. 5.

Fig. 5 Condensing appliances only (RTG 199HE)

WARNING:

▶ The control panel shield must always

remain closed, except when making

adjustments, to prevent damage to

heater from weather.

6720645551-16.1V

Installing outdoor kit

Outdoor kit – 6 720 811 755 (2014/05)

▶ 3. Attach the gasket provided with the kit as shown in Fig.

Fig. 6

▶ 4. Install supplied Freeze Prevention Kit (separate

packaging). Follow separate installation instructions

provided with Freeze Prevention.

▶ Position the outdoor vent cap on the top of the appliance,

as shown in Fig. 7.

Fig. 7

▶ Attach the outdoor vent cap to the appliance by fastening

the two provided screws and washers, see Fig. 8.

Fig. 8

Note: Freeze Prevention is not designed

to protect the appliance during long

durations below freezing or to protect

plumbing outside the appliance. Always

drain the water heater if it will be exposed

to long term freezing conditions.

6720645551-15.1V

NOTE: Once this kit is installed, the outdoor

vent cap will need to be removed, before

removing front cover.

Mounting instructions

Outdoor kit – 6 720 811 755 (2014/05)

5 Mounting instructions

▶ The water heater is approved for installation directly on an

outside wall. Secure the wall mounting bracket provided

with the water heater to a wall surface. See Fig. 9.

▶ The installation method of the mounting bracket will

depend on the type of mounting surface. Due to the

varieties of building siding or surfacing, the installer must

decide how best to support and level the heater on an

outside wall. It is recommended that horizontal or vertical

support boards or plywood sheathing (1/2” minimum) first

be attached to the wall surface. The heater must also be

kept level on the wall surface.

Fig. 9 Installation on wood siding

Fig. 10 Installation on vinyl siding

6 Recess box - Outdoor installation

6.1 Warnings

WARNING: Do not mount heater directly to

vinyl siding.

▶ With vinyl siding, a 3½' x 4' area of the

siding must first be removed and then

replaced with wood or other non-plastic

material. See Fig. 10.

DANGER:

▶ The top of the outdoor kit will get very

hot during operation. Keep away from

children. Install heater in a location

where the top of the kit cannot be

reached by small children.

DANGER:

▶ Flue gas will be released through the

outdoor kit. Flue gas is very hot and

contains carbon monoxide. The outdoor

kit cannot be installed on a water heater

mounted indoors. To prevent risk of fire

and carbon monoxide poisoning,

maintain all clearances indicated in

these instructions.

Installations

Outdoor kit – 6 720 811 755 (2014/05)

7 Installations

7.1 Installation only with Recess box

This outdoor kit is intended to be installed together with recess

box.

Fig. 11 Mounting the heater inside recess box

Fig. 12 Close the recess box cover with Padlock

DANGER:

▶ Do not place or store any combustible

material within 5 feet of the appliance.

Maintain specified clearance to

combustibles on the wall where the

appliance is installed and any adjacent

walls or overhang. Observe all

clearances required in this manual.

DANGER:

▶ Surface temperature of the kit is less

than 140 °F, except highest top surface

which may reach 300 °F.

DANGER:

▶ The water in this appliance is cold and

always remains cold except for the times

when the burner is on. In the event of

power outage in conjunction with

freezing temperatures, it is

recommended that the heater be

drained.

DANGER:

▶ Damageto the appliance from freezing is

not covered under the manufacturer's

warranty.

6720644956-06.1V

6720644956-08.1V

Installations

Outdoor kit – 6 720 811 755 (2014/05)

7.2 Installing outdoor vent cap on the appliance

▶ 1. Attach the supports (A) to the appliance by fastening

with the four provided screws, as shown in Fig. 13.

Fig. 13

Before mounting the outdoor kit in the appliance:

▶ Position the outdoor vent cap on the top of the appliance,

as shown in Fig. 14.

Fig. 14

▶ Attach the outdoor vent cap to the appliance by fastening

the two provided screws and washers, see Fig. 15.

Fig. 15

Installation of frame in the heater

To install the protection grill in the heater;

▶ Tilt the frame on one direction, as showed in Fig. 16.

▶ Push the frame to fit the Outdoor vent cap.

Fig. 16

WARNING:

▶ The control panel shield must always

remain closed, except when making

adjustments, to prevent damage to

heater from weather.

6720644956-03.1V

6720645551-01.1V

NOTE: Once this kit is installed, the outdoor

vent cap will need to be removed before

removing the front cover.

6720645551-04.1V

Installations

Outdoor kit – 6 720 811 755 (2014/05)

▶ Place the protection grill in the Outdoor vent cap.

Fig. 17

▶ Fix the frame and protection grill with two screws.

Fig. 18

▶ Position the recess box cover as showed in Fig. 19.

Fig. 19

▶ Fix the frame to the recess box cover with 4 screws, 4 metal

washers and 4 silicone washers.

Fig. 20

6720645551-05.1V

6720645551-07.1V

Electrical connections

Outdoor kit – 6 720 811 755 (2014/05)

▶ Close the recess box cover with padlock (optional).

Fig. 21

8 Electrical connections

8.1 Electrical power supply

The water heater requires an electrical power supply from a

120VAC / 60Hz circuit (with a dedicated outlet) and must be

properly grounded.

The heater is wired as shown in the wiring diagram of the water

heater installation manual.

Fig. 22 Connecting power supply cord

[1] Power cord length: 3ft.

Note: Outlet appliance is plugged in to should be clear from

possible water damage.

▶ Refer to water installation manual to complete installation

of gas and water piping connections.

▶ Start and operate the water heater according to the water

heater installation manual. NOTE: Open the control panel

shield to access the controls of the heater.

WARNING:

▶ For safety reasons, disconnect the

power supply cord to the heater before

any service or testing is performed.

WARNING:

▶ This heater must be electrically

grounded in accordance with the most

recent edition of the National Electrical

Code. NFPA 70. In Canada, all electrical

wiring to the heater should be in

accordance with local codes and the

Canadian Electrical Code, CSA C22.1

Part 1. Do not rely on the gas or water

piping to ground the metal parts of the

heater

6720645551-08.1V

WARNING:

▶ Confirm that the water heater is

appropriately grounded and that the

installation meets all applicable

electrical codes for outdoor

installations.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bradford White Boiler Handbücher

Bradford White

Bradford White E32-120R Bedienungsanleitung

Bradford White

Bradford White D100T Bedienungsanleitung

Bradford White

Bradford White RE380T6 Bedienungsanleitung

Bradford White

Bradford White PE4403S Series Bedienungsanleitung

Bradford White

Bradford White 45837F Bedienungsanleitung

Bradford White

Bradford White 238-45917-OON Beilage

Bradford White

Bradford White E32-50S Bedienungsanleitung

Bradford White

Bradford White ElectriFLEX HD CEHD 50 Bedienungsanleitung

Bradford White

Bradford White RE2H50R10B-1NCWT Originalbetriebsanleitung

Bradford White

Bradford White GAS-FIRED WATER HEATER Bedienungsanleitung

Bradford White

Bradford White EF-60T-125 Bedienungsanleitung

Bradford White

Bradford White RG250T6N Bedienungsanleitung

Bradford White

Bradford White TTW URG2PV50H6N Bedienungsanleitung

Bradford White

Bradford White Defender RG130T N Series Bedienungsanleitung

Bradford White

Bradford White Copper Brute II Bedienungsanleitung

Bradford White

Bradford White BRUTE DELUXE BMT2H Leitfaden

Bradford White

Bradford White D-38T-155 Bedienungsanleitung

Bradford White

Bradford White 238-46392-00G Montageanleitung

Bradford White

Bradford White Copper Brute II BWCH 2000 Bedienungsanleitung

Bradford White

Bradford White D4403S series Bedienungsanleitung

Bradford White

Bradford White Everhot IGE-199R Series Beilage

Bradford White

Bradford White EFTM Montageanleitung

Bradford White

Bradford White GX1-55S Montageanleitung

Bradford White

Bradford White LC2PV50H76N Bedienungsanleitung

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

A.O. Smith

A.O. Smith Gphe 50 Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung

PVI

PVI MAXIM Bedienungsanleitung

Sunerg Solar Energy

Sunerg Solar Energy Calor Top 200D Betriebsanleitung