Brickcom CB-100A Series Bedienungsanleitung

Megapixel (PoE) Cube Network Camera

CB-100A/CB-101A/CB-102A Series

Quick Installation Guide

Quality Service Group

Read Before You Use

1. Power off the camera device

immediately if it starts smoking or

smells unusual.

2. Power off the camera device

immediately if the camera is exposed to

rain or liquid.

3. Do not set the camera device near any

heat sources. (Ex: television and oven)

4. Keep the camera device away from

direct sunlight.

5. Do not set the camera device over the

specific operating temperature.

6. Do not set the camera device in any wet

and humid environments.

7. Do not set the camera device on

unsteady surfaces.

8. Do not attempt to dismantle the camera

device.

9. Do not drop or hit the camera device.

10. Do not use the camera device when

there is lightning.

1. Check Package Contents

a. Network Camera

CB-100A/CB-101A CB-102A

b. Product CD

c. Camera Stand

CB-100A/CB-101A CB-102A

d. Warranty Card

e. Terminal I/O Connector Block

(CB-101A/CB-102A)

f. Easy Installation Guide

g. 1.5m White Flat RJ-45 cable

(CB-100A)

h. Power Adapter(CB-100A)

2. Device Description

<CB-100A/CB-101A>

Adjustable focal Lens

Built-in

Microphone

PIR(*)

Illumination LED(*)

Speaker(*)

<CB-102A>

Reset Button

Terminal I/O Connector

Ethernet RJ45

10/100 Socket

Power Connector

Reset Button

NOTE: (*) These are optional features. Please refer to the Product List for the

full list of optional features available for the product.

3. Connecting the CS-Mount Lens to CB-102A

1. Connect the CS-mount lens to the camera by turning it clockwise onto the

camera mount until it stops.

2. Adjust the focus controller to get the best resolution.

Micro SD slot(*)

Privacy button(*)

WPS button

(WCB-100A Only)

Power LED

WPS LED (WCB-100A)

Firmware upgrade LED

(CB-100A/CB-101A/CB-102A)

Status LED

Internet LED

Privacy LED

4. Camera Connection

<CB-100A>

Basic Connection

1. Connect the supplied power cable from the camera to the power outlet.

2. Connect the camera to a switch via Ethernet cable.

<CB-101A/CB-102A>

1 Terminal I/O Connector Block Connection

1.1 The supplied terminal I/O connector block can be used to connect

external devices, such as sensors and alarms to the camera. Use

the diagram above to attach the external devices to the connector

block. Attach the connector block to the terminal connector on the

camera.

2 Basic Connection (Without PoE)

2.1 Connect the camera to a switch using a standard Ethernet cable.

2.2 Connect the power adapter from the camera to a power outlet.

Note: DC12V 1A power adapter is required.

3 Power over Ethernet (PoE) Connection

3.1 The CB-101A is PoE compliant, so there are two options for

connecting the camera to a power and Ethernet source. The

camera can either be connected to a PoE-enabled switch or a

non-PoE switch.

A. If using a PoE-enabled switch:

1. Use a single Ethernet cable to connect the camera to the

PoE-enabled switch.

B. If using a non-PoE switch:

1. Use a standard Ethernet cable to connect the camera to a PoE Injector.

2. Use a standard Ethernet cable to connect the PoE Injector to the non-PoE

switch.

3. Use a standard power cable to connect the PoE Injector to a power outlet.

5. Setup the Network Camera

1. Insert the Installation CD into the CD-ROM driver. Run Auto-Run Tool

directly from the CD-ROM to start the installation. When installing the

Brickcom software kit for the first time, select a desired language for the

interface. The available languages are listed in the scroll box. Click

<Install> and follow the steps to install the EasyConfig wizard on the

desired computer.

Please follow the instruction of the InstallShield Wizard to finish the

Brickcom Software Kit installation.

Andere Handbücher für CB-100A Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Brickcom Sicherheitskamera Handbücher

Brickcom

Brickcom OB-500Af Series Datenblatt

Brickcom

Brickcom MD-100A series Bedienungsanleitung

Brickcom

Brickcom OB-E400AF Gebrauchsanweisung

Brickcom

Brickcom FB-500A series Bedienungsanleitung

Brickcom

Brickcom FD-300Ap series Gebrauchsanweisung

Brickcom

Brickcom FD-100A Series Bedienungsanleitung

Brickcom

Brickcom FB-100Ae Series Datenblatt

Brickcom

Brickcom MD-100Ae Bedienungsanleitung

Brickcom

Brickcom OSD-200 20xp Bedienungsanleitung

Brickcom

Brickcom CB-100A Series Bedienungsanleitung

Brickcom

Brickcom Fixed Dome Series Datenblatt

Brickcom

Brickcom OSD-040 36x Series Bedienungsanleitung

Brickcom

Brickcom OB-E400AF Datenblatt

Brickcom

Brickcom Fixed Box Series Bedienungsanleitung

Brickcom

Brickcom FB-100Ap Series Gebrauchsanweisung

Brickcom

Brickcom PZ-040 12x Series Bedienungsanleitung

Brickcom

Brickcom Merge FD-300Ap Gebrauchsanweisung

Brickcom

Brickcom MD-300Np-A4-Star Datenblatt

Brickcom

Brickcom FB-H200Np-S-WDRPro Datenblatt

Brickcom

Brickcom VD-E200Af series Datenblatt

Brickcom

Brickcom OB-E200Nf-S Datenblatt

Brickcom

Brickcom MD-500Ap Series Gebrauchsanweisung

Brickcom

Brickcom Mini Dome Series Bedienungsanleitung

Brickcom

Brickcom OB-100A Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung