Bristan PIV BSM C Bedienungsanleitung

Please keep this booklet for future

reference.

Installer, when you have read these

instructions please ensure you leave them

with the user.

Installation Instructions

Pivot Tap Range

Models covered:

PIV BSM C, PIV BF C,

PIV WMBAS C, PIV WMBF C

www.divapor.com

Contents

Thank you for choosing Bristan, the UK’s leading taps and showers expert.

We have designed this product with your enjoyment in mind. To ensure that it works

to its full potential, it needs to be ﬁtted correctly. These ﬁtting instructions have been

created to give you all of the information you need and, if you need any further help,

please do not hesitate to contact us.

Important Safety Information................................................... 3

General Information ................................................................. 4

Speciﬁcations ........................................................................... 5

Dimensions............................................................................... 6-7

Installation Requirements ....................................................... 8

Installation................................................................................ 9-10

Bath Filler and Bath Shower Mixer ......................................... 9

Wall Mounted Basin Mixer and Bath Filler.............................. 10

Maintenance ............................................................................. 11

Troubleshooting........................................................................ 12

Notes......................................................................................... 13

Guarantee ................................................................................. 14-15

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

Important Safety Information

•Please read these instructions thoroughly and retain for future use.

•All products manufactured and supplied by Bristan are safe provided they are

installed, used correctly and receive regular maintenance in accordance with these

instructions.

•If you are in any doubt about your ability to install this product safely you must

employ the services of an experienced qualiﬁed plumber.

•This product needs to be installed in accordance with, and meet the requirements of

the Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.

•Remove all packaging and check the ﬁtting for damage before starting installation.

•Warning: Before starting any installation please consider the following: before

drilling into walls, check that there are no hidden electrical wires, cables or water

supply pipes. This can be checked with the aid of an electronic detector.

•If power tools are used do not forget to: - Wear eye protection

- Unplug equipment after use

•Important: Remember to turn off the mains water supply before connecting to any

existing pipe work. Fitting isolating valves to the inlet feeds is recommended for ease

of maintenance.

•Warning: Before installing this product it is essential that you thoroughly ﬂush

through the pipework in order to remove any remaining swarf, solder, etc.

Failure to carry out this procedure could cause problems or damage to the workings of

the tap.

•Take care when handling the ‘ﬂexible connecting pipes’, do not bend, twist or crush

them. Only tighten the pipes by hand.

•Do not crush or kink the shower hose, this could damage the hose and cause leaks.

•This product must not be modiﬁed in any way as this will invalidate the guarantee.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

General Information

This product has been tested to the Water Regulations Advisory Scheme (WRAS) and

satisﬁes the requirements of the Water Supply (Water Fittings) Regulations 1999 and

current bylaws. For full Installation Requirements & Notes (IRN) please visit

www.wras.co.uk/directory.

Designed to comply with BS EN 200 for combination taps to be used within systems

designed to BS 8558.

BS 8558 recommends hot water should be stored and distributed at a temperature of

not less than 60°C which will help minimise the buil-up of lime scale in hard water

areas.

If installing this product on a low pressure (tank fed) system please see speciﬁcations

table on page 5 to determine the minimum distance required from undeside of the cold

water tank to the outlet.

These taps and mixers should be installed in compliance with the Water Regulations.

Where the supplies are unbalanced, i.e. Hot water from cylinder tank / cold from the

mains, approved check valves must be ﬁtted in the supply pipes.

For further details contact your Local Water Authority.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

Speciﬁcations

Product Code

Working pressure

Inlet

Minimum

distance from

cold water tank to

outlet (metres)

Min Max

PIV BSM C 0.2 5.0 3/4" BSP Threaded Tail 2

PIV BF C 0.2 5.0 3/4" BSP Threaded Tail 2

PIV WMBAS C 0.2 5.0 15mm Compression 2

PIV WMBF C 0.2 5.0 22mm Compression 2

Maximum static pressure- 10.0 bar

System Requirements:

Gravity fed hot & cold (Equal pressures)

Gravity fed hot & cold (Differential pressure, maximum ratio 5:1)

Unvented systems

Instantaneous water heater (Combination boiler)

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

Dimensions

Dimensions are approximate and in millimetres.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

180

102

112

180

102

112

180

102

Bath Shower Mixer

Bath Filler

www.divapor.com

Dimensions Cont.

Dimensions are approximate and in millimetres.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

180

240

200

240

3 Hole Wall Mounted Basin Mixer

3 Hole Wall Mounted Bath Filler

www.divapor.com

Installation Requirements

Flexible Connecting Pipes

Care must be taken when connecting the ﬂexible connection pipes to the household pipework to

ensure they do not bend sharply and kink or twist.

See below for recommended ways to ﬁt the ﬂexible connecting pipes.

Slight

bend

90°

Angle

Kink Curved

round

Twists

Important: Failure to follow these guidelines may result in poor performance and damage

to the ﬂexible connecting pipes.

Important: Full access must be made available on installation for future maintenance/

servicing purposes.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

Installation

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Bath Filler / Bath Shower Mixer

1. Slide the plinths onto the threaded tails

2. Fit the bath ﬁller / bath shower mixer

to the bath ensuring that the washers are

ﬁtted between the plinths and the bath to

create a water tight seal.

3. Secure the body to the bath using the

washers and metal backnuts. Tighten the

backnuts onto the threaded tails.

A suitable spanner may be required to

fully tighten the backnuts.

4. Connect the hot and cold water

supplies to the threaded tails using

a 3/4" BSP connector (not supplied).

5. Bath Shower Mixer only - ﬁt the shower

hose to the hose outlet using the small

sealing washer, and the handset to the

hose using the small washer.

Important: Prior to the drilling into

walls, check there no hidden electrical

wires, cables or water supply pipes with

the aid of an electronic detector.

If you use power tools do not forget to:

• Wear eye protection

• Unplug equipment after use

Fit the wall bracket (not shown) to the

wall using the ﬁxings supplied, ensuring

the handset and hose reaches it.

6. Turn on both water supplies and turn

both handles to the on position, letting the

water ﬂow for a few minutes.

7. Check all joins and connections for any

leaks.

8. To switch from bath to shower mode,

pull the diverter knob up and twist, to

revert back to bath ﬁlling mode twist and

push the diverter knob back down.

www.divapor.com

Installation Cont.

1. Decide on the ﬁnal position of the basin

mixer/ bath ﬁller. Install suitable battons into

the wall cavity if required to support the tap

body.

2. Plumb the hot and cold water supply pipes to

the required position.

3. Secure mixer body using the screws and wall

plugs supplied.

4. Attach the supply pipework to the hot and

cold inlets (hot on the left and cold on the right

when viewed from the front) ensuring the olive

is ﬁtted to the copper pipe work. Tighten the

compression nut to secure the pipework and

create a water tight seal.

Note: Before ﬁnishing the wall surface turn on

both water supplies to check for any leaking

connections.

5. Finish the wall surface.

Note: It is important that a sufﬁcient amount

of the spout connecting tube is left exposed to

allow the spout to connect.

6. Push the plinths onto the valve shrouds and

secure by tightening the grub screws.

7. Attach the spout to the concealing plinth

using the screws supplied.

8. Push the spout onto the spout connecting

tube ensuring the o-rings on the spout

connecting tube have located inside the spout.

Tighten the grub screws to secure the spout in

place.

9. Push the handles onto the valves and tighten

the grub screws.

10. Turn on both water supplies and operate the

handles letting the water ﬂow for a few minutes

to ﬂush the system.

Wall Mounted Basin Mixer / Bath Filler

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan Blade BL BAS C Bedienungsanleitung

Bristan

Bristan H64WMT2 Montageanleitung

Bristan

Bristan CR SHXDIVFF C Verdrahtungsschema

Bristan

Bristan Joy ThermoSafe Series Montageanleitung

Bristan

Bristan K SNKSL EF C Bedienungsanleitung

Bristan

Bristan TY2 SDIV C Montageanleitung

Bristan

Bristan CART 06734B Original Betriebsanleitung

Bristan

Bristan N2 SHC3STP G Verdrahtungsschema

Bristan

Bristan SAF SHCDIV BLK (D1) Verdrahtungsschema

Bristan

Bristan Java J SFSNK EF C Bedienungsanleitung

Bristan

Bristan MIO BAS C (D1) Verdrahtungsschema

Bristan

Bristan Artisan AR SNK C Bedienungsanleitung

Bristan

Bristan Z2 DUS 1/2 C Verdrahtungsschema

Bristan

Bristan Java Eco Click J EBAS C Bedienungsanleitung

Bristan

Bristan Target TG SNK C Bedienungsanleitung

Bristan

Bristan VAL2 BIB C 6 CD Verdrahtungsschema

Bristan

Bristan Jute JU BSM C Bedienungsanleitung

Bristan

Bristan W BASIN08 C Verdrahtungsschema

Bristan

Bristan RS2 BSM C (D3) Verdrahtungsschema

Bristan

Bristan PIV BAS C Bedienungsanleitung

Bristan

Bristan Blade Bath Shower Mixer BL BSM C Bedienungsanleitung

Bristan

Bristan Regency R BSM C Bedienungsanleitung

Bristan

Bristan HY POWSHX W Montageanleitung

Bristan

Bristan CAP2 SHUAR C Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung