Bristan RO2 SHXAR C Montageanleitung

Installation Instructions

and User Guide

Rio Thermostatic Surface

Mounted Shower Valve with

Adjustable Riser

Models covered: RO2 SHXAR C

Please keep this booklet for future

Reference.

Installer, when you have read these

instructions please ensure you leave them

with the user.

Contents

Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have

designed this product with your enjoyment in mind. To ensure that it works to its

full potential, it needs to be fitted correctly. These fitting instructions have been

created to give you all of the information you need and, if you need any further help,

please do not hesitate to give us a call on 0330 026 6273.

Important Safety Information ………………………………………………………….

General Information ………………………………………………………………………..

Product Features …………………………………………………………………………….

Specifications …………………………………………………...................................

Dimensions ………………………………………………………................................

Pack Contents ………………………………………………………………………………..

Installation Requirements ……………………………………….........................

Flow Regulators ………………………………………………………………………........

Prior to Installation …………………………………………………………………………

Installation ……………………………………………………………………….................

Shower Valve ………………………………………………………………………………

Adjustable Riser ..……………………………………………………………………….

Operation ……………..........………………………………………………………………….

Commissioning ……………………………....………………………………………………

Maintenance …………………………….....………………………………………………….

In-Service Testing ……………………………………………………………………………

Troubleshooting ……………………………………........………………………………….

Guarantee ……………………………………............……………………………………….

8-11

12-13

15-18

15-16

17-18

21-22

23-24

25-26

2Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

•Please read these instructions thoroughly and retain for future use.

•All products manufactured and supplied by Bristan are safe provided they are installed,

used correctly and receive regular maintenance in accordance with these instructions.

•If you are in any doubt about your ability to install this product safely you must

employ the services of an experienced qualified plumber.

•Do not use if the showerhead or shower hose has been damaged or is blocked.

•Do not crush or kink the shower hose, this could damage the hose and cause leaks.

•Remove all packaging and check the components for damage before starting

installation.

•Warning: Before starting any installation please consider the following: Prior to

drilling into walls, check that there are no hidden electrical wires, cables or water

supply pipes. This can be checked with the aid of an electronic detector.

•If power tools are used do not forget to: -Wear eye protection

-Unplug equipment after use

•The fitting of isolating valves is required as close as is practical to the supply inlet

feeds of the thermostatic mixing valve.

•Warning: Before installing the new shower valve it is essential that you

thoroughly flush through the pipework in order to remove any remaining swarf, solder,

etc. Failure to carry out this procedure could cause problems or damage to the

workings of the shower valve.

•This product must not be modified in any way as this will invalidate the guarantee.

Important Safety Information

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

General Information

This product has been tested to the TMV2 scheme which complies with the BS

EN 1287:1999 (LP) and BS 1111:1999 (HP) thermostatic mixing valve standards.

It also satisfies the requirements of the water supply (water fittings) regulations

1999 and current bylaws.

BS 6700 recommends the temperature of stored water should never exceed

65°C. A stored water temperature of 60°C is considered sufficient to meet all

normal requirements and will minimise the build up of lime scale in hard water

areas.

Important: Nominally equal (balanced) inlet supply pressures are

recommended for optimum performance with mixer showers.

This shower valve should be installed in compliance with the Water Regulations.

If in doubt, contact a registered plumber or your Local Water Authority or the

Secretary of The Institute of Plumbing, address as follows;-

The Institute of Plumbing,

64 Station Lane,

Hornchurch,

Essex, RM12 6NB

Tel:01708 472791

Guide to designations

HP High Pressure

LP Low Pressure

S Shower

4Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Product Features

1. On/Off Control

Turn the control anti-clockwise

to turn the shower on and increase

the flow of water.

Turn the control clockwise to

decrease the flow of water and

turn the shower off.

2. Temperature Control

Turn the control anti-clockwise to

increase the temperature.

Turn the control clockwise to

decrease the temperature.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Specifications

Inlet Connections: 15mm compression, with adjustable centres.

Operating Pressure Range: Min: 0.1 bar –Max: 5.0 bar –Maximum recommended

imbalance between hot and cold supply should not exceed a ratio of 5:1.

Maximum Static Pressure: 10.0 bar

Maximum Outlet Temperature: Factory pre-set to 41ºC (can be re-set to suit site

conditions).

Supply Requirements:

Minimum cold water supply temperature: 5ºC.

Maximum cold water supply temperature: 25ºC.

Maximum hot water supply temperature: 80ºC.

(a maximum hot water supply temperature of

60 –65ºC is recommended for ablutionary

purposes).

Note: The inlet hot water temperature must be

at least 10ºC above the required blend

temperature (e.g. shower temperature

43ºC: minimum hot supply 53ºC.

6Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

519

551

110-155

129

Pack Contents

1Shower Valve

2Covers x2

3Filters x2 (pre-fitted)

4Green flow regulator (Pre-fitted)

5Yellow flow regulator (Pre-fitted)

6Backplate fixings x2

7Riser rail fixings x4

8Showerhead (single function)

9Sealing washers x2

10 Shower hose

11 Riser rail

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation Requirements

This shower valve must be installed in

compliance with current water regulations.

If you have any doubts about the water

regulation requirements contact your local

water services provider or use the services

of a professional plumber.

This shower valve is suitable for use with

the following water supply systems.

•Gravity Fed Hot and Cold

(pressure Balanced)

•Gravity Fed Hot and Mains Cold

(differential pressure –see Specification

section on page 6.

•Instantaneous Water Heater

(combination boiler)

•Unvented System

•Pumped System

Gravity Fed Hot and Cold

Important: If you install this shower

valve with a gravity fed system, there must

be a minimum head (vertical distance)

from the underside of the cold water

storage tank to the showerhead position of

at least 1 metre.

Note: Pumped system (with Essex

flange) If you install this shower valve to a

pumped gravity fed system where the

minimum head (vertical distance) from the

underside of the cold water storage tank to

the top of the hot water cylinder is less

than 1 metre we recommend an Essex

flange is used as shown on page 9.

Flushing Pipework

Important: Before connecting the

shower valve (see Installation on pages 15-

18), supply pipework must be flushed to

clear debris before connecting the shower

valve. Debris will reduce the performance

and life of the shower.

Gravity Fed Hot and Mains Cold

Cold mains supply Cold mains supply

1m min

min

8Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation Requirements

Instantaneous Water Heater Unvented System

Pumped System Pumped System (with Essex flange)

Key: Isolating Reducing Shower Pump Essex

Valve Valve Valve Flange

Cold mains supply Cold mains supply

1m min 1m min

If less

than 1m

see note.

50mm

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation Requirements

These fittings need to be installed in

accordance with the following Installation

Requirements and Notes (IRN) to ensure

they meet the requirements of the Water

Supply (Water Fittings) Regulations 1999

and the Scottish Byelaws 2004.

IRN R001: See text of entry for Installation

Requirements or Notes.

IRN R040 -Schedule 2-15 (1): The

fitting shall be installed so that its outlet

discharges above the spill-over level of

any fixed appliance as indicated below:-

For backflow protection in domestic or

installations up to, and including, Fluid

Category 3.

If the fitting cannot be installed as

indicated in the table opposite it shall be

installed as either a or bbelow:

a: with an approved double check valve

assembly or some other no less

effective backflow prevention device

immediately upstream of the inlet.

b: so that it draws water by gravity only

from a cistern, or cylinder having a

permanently open vent pipe, and the

distributing pipe supplies no other fitting

(other than draining tap) at a lower level.

For backflow protection in premises or

installations up to, and including Fluid

Category 5.

The vertical distance of the outlet above

the spill-over level shall be not less than

20mm or twice the diameter of the inlet

pipe to the fitting, which ever is the

greater. If the fitting cannot be installed

as indicated it shall be installed with a

backflow prevention arrangement

suitable for the Fluid Category.

Size of tap or

combination fitting.

Vertical distance

of outlet above

spill-over level.

1. Not exceeding 1/2

in 20mm

2. Exceeding 1/2 in

but not exceeding

3/4 in

25mm

3. Exceeding 3/4 in 70mm

10 Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Andere Handbücher für RO2 SHXAR C

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan CR SHXDIVFF C (D7) Verdrahtungsschema

Bristan

Bristan Quadrato Tap Range Verdrahtungsschema

Bristan

Bristan Java J BF C Bedienungsanleitung

Bristan

Bristan Joy ThermoSafe Series Montageanleitung

Bristan

Bristan TG SNK C Verdrahtungsschema

Bristan

Bristan CAP2 SHUAR C Montageanleitung

Bristan

Bristan DSC 3HBAS C Montageanleitung

Bristan

Bristan GLL FLEXSNK C (D1) Verdrahtungsschema

Bristan

Bristan W BATH12 C Verdrahtungsschema

Bristan

Bristan Prism Eco Click Bedienungsanleitung

Bristan

Bristan SAF SHCDIV BLK (D1) Verdrahtungsschema

Bristan

Bristan Regency R BSM C Bedienungsanleitung

Bristan

Bristan VR1000 Bedienungsanleitung

Bristan

Bristan Regency Luxury R BSM C Verdrahtungsschema

Bristan

Bristan W BASIN08 C Bedienungsanleitung

Bristan

Bristan Cadet Verdrahtungsschema

Bristan

Bristan MIO BAS C (D1) Verdrahtungsschema

Bristan

Bristan QST BAS2 C Bedienungsanleitung

Bristan

Bristan VAC BAS C MT (D4) Verdrahtungsschema

Bristan

Bristan smile Montageanleitung

Bristan

Bristan Artisan AR SNK C Bedienungsanleitung

Bristan

Bristan PRISM PM SNK C Bedienungsanleitung

Bristan

Bristan W BASIN07 C Verdrahtungsschema

Bristan

Bristan CR SHXDIVFF C Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung