Bristan Regency Luxury R BSM C Verdrahtungsschema

Regency Luxury Bath Shower Mixer

Installation Instructions & User Guide

IMPORTANT: Please keep these instructions for future reference and request of replacementparts

Safety

Note

1. Introduction

Thank you for choosing Bristan, the UK’s leading taps and showers expert. We

have designed this product with your enjoyment in mind. To ensure that it

works to it’s full potential, it needs to be fitted correctly.

These fitting instructions have been created to give you all of the information

you need and, if you need any further help, please do not hesitate to contact us

on 0330 026 6273.

2. Safety Note

Please red these instructions thoroughly and retain for future use.

All products manufactured and supplied by Bristan are safe provided they are

installed correctly, used correctly and receive regular maintenance in

accordance with these instructions.

These fittings need to be installed in accordance with and meet the

requirements of the Water Supply (Water Fittings) Regulations 1999 and

Scottish Bylaws 2004.

Before starting any installation please

consider the following:

•Prior to drilling into walls, check that

there are no hidden electrical wires,

cables or water supply. This can be

checked with the aid of an electronic

detector.

If power tools are used, do not forget

to:

•Wear eye protection

•Unplug equipment after use

3. Specification

Operating Pressure Range (bar)

Bath Shower Mixer Min. Max.

0.2 5.0

Maximum Static Pressure –10 bar

NOTE: Nominally equal (balanced) inlet supply pressures are recommended for optimum

performance

Designed to comply with BS EN 200 for single taps/combination taps for water systems

of type 1 and 2 general technical specifications and to be used within systems designed

to BS 6700.

BS6700 recommends the temperature of stored water should never exceed 65°C. A

stored temperature of 60°C is considered sufficient to meet all normal requirements and

will minimise the build up of lime scale in hard water areas

4. Installation

This mixer is suitable for use at all supply pressures. However, for optimum

performance, use both hot and cold water supplies, which should be ideally balanced.

Operating Pressures: Min. 0.2 Bar –Max. 5.0 Bar

If the fitting is installed at low pressure (tank fed), then the minimum distance from the

underside of the nozzle to the cold water tank should be at least 2 metres to ensure

adequate shower performance.

This mixer should be installed in compliance with Water Regulations.

Where the supplies are balanced, i.e. hot water from the cylinder tank and cold from the

mains, approved check valves must be fitted in the supply pipes.

For further details, please contact your Local Water Authority.

4. Installation Continued

1. Identify all components are present prior to installation

2. Fit the legs (1 and 2) to the body (3) using the large sealing washers (4)

3. Fit the mixer to the bath using the back nuts (5) and washers (6). Connect the hot

and cold water supplies.

4. Fit the wall bracket (7) to the wall using the fixing kit provided

5. Fit the hose (8) to the wall bracket and the handset

6. Fully open both valves, letting the water run for a few minutes to flush the system

and check for any leaks.

7. Operate the mixer in both bath fill and shower mode. To switch from bath filler to

shower mode, simply move the diverter lever (10) from one direction to the other

4. Installation Continued

Contents List

1. Indices x2 11. Anti-Splash x1

2. Screw x2 12. Nut x2

3. Handle x2 13. Pillar leg (left) and washer x1

4. Shroud x2 14. Back nut x2

5. Valve x2 15. Pillar leg (right) and washer x1

6. Hose and washer x1 16. Filter Washer x1

7. Diverter Lever x1 17. Shuttle x1

8. Diverter Mechanism x1 18. Outlet reducer x1

9. O Ring x1 19. Wall Bracket x1

10. Spout x1 20. Handset x1

5. Cleaning & Maintenance

Your fitting has a high quality finish and should be treated with care to preserve the

visible surfaces. All finishes will wear if not cleaned correctly. The safe way to clean

your product is to wipe with a soft damp cloth. Stains can be removed using washing up

liquid. All bathroom cleaning products (powders and liquids) will damage the surface of

your fitting, even the non-scratch cleaners.

NOTE: Never use abrasive detergents or disinfectants or those containing alcohol,

hydrochloric or phosphoric acid.

We advise that your fitting is regularly serviced, particularly in hard water areas.

Maintenance

Traditional valve type –if the fitting leaks from the spindle

1. Remove the fitting head

2. Tighten the gland nut on top of the valve

Sureflow type valves –if the fitting self opens

1. Remove the fitting head

2. Tighten the gland nut on top of the valve

All valve types –if the fitting begins to drip

1. Turn off both water supplies

2. Remove fitting head and valve

3. Carefully clean seating and rubber washer

4. Replace the valve and head. Turn on both water supplies

5. Contact our helpline if the problem persists

This booklet covers product codes

RBSM CR BSM G

R DBSM C R DBSM G

RLBSM CR LBSM G

R TBSM C R TBSM G

At Bristan, we want to make things as easy as possible for our customers.

That’s why we offer solid guarantees on all our products, effective from the

date of purchase, to give you peace of mind.

To start your free guarantee, simply scan the QR code and register your product.

Alternatively, visit www.bristan.com/register to register your product

via a computer.

For full guarantee terms and conditions visit, www.bristan.com/guarantees

Helpline

0330 026 6273

Bristan Group Limited

Birch Coppice Business Park, Dordon, Tamworth, Staffordshire B78 1SG

A Masco Company

Website:www.bristan.com

Telephone: 0330 026 6273

Email:[email protected]

REV. D7

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan Quest QST BF C Bedienungsanleitung

Bristan

Bristan W BATH12 C Verdrahtungsschema

Bristan

Bristan W SNK6 C Bedienungsanleitung

Bristan

Bristan Manhattan MH SNK C Bedienungsanleitung

Bristan

Bristan Zing Safe Touch Bar Mixer Multi Mode Kit Verdrahtungsschema

Bristan

Bristan Z 1/2 C Bedienungsanleitung

Bristan

Bristan PM2 SHCDIV BLK (D2) Verdrahtungsschema

Bristan

Bristan FHC CTRD01 C Bedienungsanleitung

Bristan

Bristan HOU 1HBF C Verdrahtungsschema

Bristan

Bristan Z2 TBV 1/2 C Verdrahtungsschema

Bristan

Bristan HOU BSM C Verdrahtungsschema

Bristan

Bristan SAF SHCDIV BLK (D1) Verdrahtungsschema

Bristan

Bristan GLL FLEXSNK C (D1) Verdrahtungsschema

Bristan

Bristan JU BAS C Bedienungsanleitung

Bristan

Bristan VAL2 BAS C CD (D2) Verdrahtungsschema

Bristan

Bristan EXD BAS C Bedienungsanleitung

Bristan

Bristan W BASIN04 C Bedienungsanleitung

Bristan

Bristan Jute JU PBSM C Bedienungsanleitung

Bristan

Bristan VAL2 BIB C 6 CD Verdrahtungsschema

Bristan

Bristan Rio Bedienungsanleitung

Bristan

Bristan ARM WORD01 C Bedienungsanleitung

Bristan

Bristan Moloko Bedienungsanleitung

Bristan

Bristan QST BSM C (D5) Verdrahtungsschema

Bristan

Bristan Prism Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung