Burley D'lite Bedienungsanleitung

Owner’s Instruction and Safety Manual

d’lite™

Euro d’lite™

Lady Bug™

Encore™

Solo™

Cub™

BURLEY®STROLLER KIT

Table of Contents

Introduction Pg. 2

Safety Guidelines Pg. 3

Hardware Bag Contents and Tool List Pg. 4

Mounting the Wheel Pivot Assembly Pg. 4

To Adjust the Tracking Pg. 6

To Convert from Strolling to Trailering Pg. 6

Maintenance Pg. 7

Warranty Pg. 8

Congratulations!

By purchasing the Burley Stroller Kit, you’ve increased the fun and

excitement that you and your family can have with your Burley child trailer.

Because some of the features and guidelines for using

your Burley merit close attention, it is very important that you familiarize

yourself with the Stroller by reading this entire manual and your Burley

Trailer manual before use. If you have any questions, please contact your

Authorized Burley Dealer or check our website at www.burley.com.

IMPORTANT:

BURLEY STROLLER KIT OWNER’S INSTRUCTION AND SAFETY MANUAL 3

Safety Guidelines

Protect Your Children

Never leave your children unattended in the Stroller, and always use the

handle bar tether. Use the shoulder harnesses and lap belts to securely hold

your children in the Stroller at all times. For maximum stability and safety,

seat a single child in the center. Periodically check the placement of the

shoulder straps, especially for sleeping children. Make sure children cannot

put a ﬁnger into the wheel spokes.

Loading Your Stroller

Do not overload your Stroller. The maximum load limit for children and/or

cargo is 100 lb. (40 kg. in Europe) for two-child trailers, and 75 lb. (34 kg.

in Europe) for single child models. When placing children or cargo into the

Stroller, keep the load centered and in front of the axle. Pack the load as low

as possible and make sure items cannot shift. Loose, heavy objects can injure

passengers in event of a sudden stop or tip over.

Always Use Your Cover

Always use your cover when using the Stroller outdoors. Never leave your

children unattended in direct sunlight, as heat buildup in the trailer can

cause serious harm. Open or close the vinyl window and periodically check

to make sure your children are comfortable.

Proper Wheels and Tires are Essential

Use only the factory-supplied wheels, and keep them properly maintained.

Inﬂate tires to 30–35 P.S.I. and check pressure before each use. Do not use

higher-pressure or knobby tires. For a smoother ride, we recommend using

tires with street tread.

Use Your Flag

Always use the safety ﬂag—it will help make the trailer more visible.

Failure to observe all of the safety guidelines in this manual could

result in an accident and serious injury or death.

WARNING

4BURLEY STROLLER KIT OWNER’S INSTRUCTION AND SAFETY MANUAL

Observe Age and Height Restrictions

The Stroller seat is intended only for children old enough to sit upright and

alone. Adequate neck strength is required to hold his/her head upright.

A physician should evaluate anyone who is of questionable developmental age

for using this Stroller. Never carry a child whose sitting height is above the roll bar,

because their chance of injury is signiﬁcantly higher in the event of a tip over.

Use Your Parking Brake

To maintain control of the Stroller, always set the parking brake before releasing

the handle. Make sure the parking brake is properly adjusted and working prior to

using your Stroller, especially after changing the tires or removing the wheels.

Walk on Suitable Surfaces

Your Stroller was designed for use on surfaces that are meant for walking. Do

not use the Stroller on stairs, escalators or other uneven surfaces while your

children are in it. Never use your Stroller with inline or roller skates.

Hardware Bag Contents and Tool List

Please verify that you have received all of the contents

listed. Do not proceed with assembly if any parts are missing; contact

Burley immediately for replacement parts.

IMPORTANT:

Bag Contents:

(1) ¼ x 2" hex bolt (2) lock nuts

(1) Pivot wheel assembly (2) ¼" x 1" hex bolts

Tools Required:

(2) 7/16 inch wrenches or small adjustable wrenches

(1) 3/4 inch wrench (1) 5/32" hex wrench

Mounting the Wheel Pivot Assembly

The Stroller wheel folds out of the way for trailering, or drops down into posi-

tion for strolling. The wheel mounts at the end of the trailer’s tongue.

Temporary Hitch Removal

Before installing the wheel pivot assembly, unhitch the trailer tongue from

the bicycle. Loosen and remove the locking nut and bolt from the tongue (the

bolt can be discarded; a longer bolt is provided for the next step). Remove

and save the hitch, locking nut, safety strap and the D-ring for re-installa-

tion. Do not remove the hitch connector in the tongue end.

BURLEY STROLLER KIT OWNER’S INSTRUCTION AND SAFETY MANUAL 5

Re-Assembly with the Wheel Pivot Assembly in Place

Slide the tongue into the wheel pivot assembly and line up the hole in the

tongue with the hole in the top of the assembly. Run the provided 2 inch bolt

through the grommet in the end of the safety strap, the holes in the wheel

pivot assembly and the tongue, and ﬁnally the D-ring. Secure the bolt with

the locking nut (tighten to 6 ft-lbs). The end of the bolt should be ﬂush or

completely pass through the end of the nut. Place the 1” bolts through the

holes on the side of the pivot assembly. Secure the bolts with the lock nuts

(tighten to 6 ft-lbs.).

D-ring

Hole in pivot

assembly

and tongue

Safety strap

with grommet

Bolt

Nut

Hitch

Re-install the Hitch

To re-install your hitch, place the Stroller wheel in the “Bike” (up) position,

so that it is out of the way, and tighten the knob. (See the following section

“Converting From Strollering to Trailering” for more details.) Then mount the

hitch to the left rear dropout of your bike. Slide the hitch connector end on

the tongue between the hitch side arms, insert the retaining pin through the

holes and close the pin. Wrap the safety strap around the inside of the chain

stay twice and then over the hitch body. Fasten the hook to the D-ring on the

top of the tongue. (See your trailer manual for more instruction.)

6BURLEY STROLLER KIT OWNER’S INSTRUCTION AND SAFETY MANUAL

To Adjust the Tracking

To adjust the tracking of the stroller wheel (which allows the stroller to roll

straight), loosen set screw with 5/32" hex wrench, adjust the bushing with

a 3/4" wrench. (See the illustration below or above). Turn the bushing until

the wheel is perpendicular to the ground. Test the tracking by pushing the

stroller away from you to make sure it rolls straight. Make any additional

adjustments before putting your child in the trailer.

When aligned tighten set screw.

To Convert from Strolling to Trailering

The wheel must be placed in the up position in order to attach the trailer to

a bicycle. The conversion from “Stroller” (down) position to “Bike trailer”

(up) position, is quick and requires no tools. First, engage the parking brake.

Loosen the wheel pivot assembly knob by turning it counterclockwise, until

the triangular pivot section can be rotated. Swing the wheel up until the

word “BIKE” on the triangular pivot section appears. The arrow should point

at the “B” in “BIKE”. Line up the small triangular section with the larger

triangular section (with

“BIKE” printed on it).

Tighten the knob. Now

attach the trailer to your

bike, using your Burley

hitch, retaining pin or

bolt, and safety strap.

Bushing

Set Screw

Shown without wheel

pivot assembly knob

BURLEY STROLLER KIT OWNER’S INSTRUCTION AND SAFETY MANUAL 7

When converting your Stroller to a bicycle trailer, make sure that the

Stroller wheel is in the proper position before attaching the trailer to

your bicycle. Do not use this product as a bicycle trailer without the

retaining pin or bolt and safety strap properly installed. Failure to

follow the instructions in this manual and your trailer manual can

cause an accident resulting in serious injury.

WARNING

Maintenance

• Lubricate the wheel-pivot assembly twice a year for normal use, or

monthly if used in wet or salty conditions.

• Inspect handle, receivers, parking brake and wheel pivot monthly.

• Contact your Authorized Burley Dealer to replace any loose or

damaged parts.

Burley Stroller Kit Limited Warranty

Burley will repair or replace parts it determines to be defective as follows: plastic parts for ﬁve

years and durable frame parts for the lifetime of the Stroller Kit. The owner of a Burley Stroller Kit

must present the Stroller Kit for repair at an Authorized Burley Dealer, together with an original

sales receipt or similar proof of purchase. This warranty applies only to the original owner and is

nontransferable. Burley can not be responsible for failure due to improper assembly, modiﬁcation

of parts or instructions, neglect, abuse, accident, and/or normal wear. The warranty does not cover

any trailer used for rental, competition, or commercial use.

Burley neither assumes nor authorizes any person to assume any other liability in connection

with Burley products, and there are no oral agreements or warranties collateral to or affecting

this agreement.

This warranty gives you speciﬁc legal rights and you may also have other rights which vary from

state to state.

“Burley” is a registered trademark of Burley Design LLC

Burley Design, LLC •4020 Stewart Rd •Eugene, OR 97402

541.687.1644 •Fax 541.687.0436 •www.burley.com

170017 manual stroller kit 2007 r1 rev. 04/07

Andere Handbücher für d'lite

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Burley Fahrradzubehör Handbücher

Burley

Burley Travoy Bedienungsanleitung

Burley

Burley HANDLEBAR CONSOLE Bedienungsanleitung

Burley

Burley d'lite ST Bedienungsanleitung

Burley

Burley DASH RM Bedienungsanleitung

Burley

Burley Tail Wagon Bedienungsanleitung

Burley

Burley Stroller Kit Bedienungsanleitung

Burley

Burley KAZOO Einrichtungshandbuch

Burley

Burley Cub Bedienungsanleitung

Burley

Burley Cub X Bedienungsanleitung

Burley

Burley Tail Wagon Bedienungsanleitung

Burley

Burley Jogger Bedienungsanleitung

Burley

Burley PICCOLO Bedienungsanleitung

Burley

Burley Moose Rack Bedienungsanleitung

Burley

Burley ENCORE Bedienungsanleitung

Burley

Burley NOMAD RACK Bedienungsanleitung

Burley

Burley Honey Bee Bedienungsanleitung

Burley

Burley BARK RANGER Bedienungsanleitung

Burley

Burley SOLO Bedienungsanleitung

Burley

Burley Tail Wagon Bedienungsanleitung

Burley

Burley Plus Trailercycle Bike Conversion Kit Einrichtungshandbuch

Burley

Burley child trailer Bedienungsanleitung

Burley

Burley Nomad Cargo Rack Bedienungsanleitung

Burley

Burley BEE Bedienungsanleitung

Burley

Burley BEE Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

Cateye

Cateye V2C - Gebrauchsanweisung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung

Burley d'lite Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken