Bushnell ImageView 110833 Bedienungsanleitung

Model #: 110833

Lit.#: 980917/0810

Instruction

Manual Version 2.0

Congratulations on your purchase of the Bushnell® 3.2 MP ImageView™!

Your ImageView“digital binocular” is ideal for all sporting events and nature

observation, as it combines a high quality 8 power compact binocular with a

versatile digital camera in a single compact unit.

Your Imageview has a dual personality, capable of taking high resolution digital

still photos as well as shooting video, with a maximum recording time limited

only by the capacity of the memory card you use. The photos and videos are

automatically stored in the internal memory, or on an SD card (optional), and

can be instantly reviewed on the ip-up LCD, or downloaded to your computer

without the need to install any special software*.

Before using your new ImageView, please read the instructions contained in this

manual and take time to familiarize yourself with the camera’s operation and

many special features.

*Compatible OS: Windows 2000, XP, Vista, Windows 7 or Mac OSX.

Windows 98 is not supported.

Parts Guide

View Button

Display

Button

LCD Display

4-way Arrow

Keypad+MENU

Button

Diopter

Adjustment

(rotate eyepiece)

POWER

Button

SNAP

Button

Binocular

Focus

Pull up both sides of this

end to raise the display

# Display Icon Guide (Preview Mode)

1 Battery Indicator (“full” battery shown)

2 # of Photos/Videos Left (based on remaining memory)

3 Internal or SD card Memory (“Internal” shown)

4 White Balance Setting (“Auto” shown)

5 Exposure Meter Pattern (“Weighted” shown)

6 Still Photo or Video Mode (Still Photo mode shown)

7 Resolution Setting (in pixels)

8 Quality/File Compression (Best / Better / Standard )

USB Port

Remote

Jack

Card Slot Power LED

Review Display

File #

Resolution

of the le

JPG=photo le

AVI=video le

Quick Start Guide

The camera is powered by two AAA batteries (not included). Slide the battery cover open (see arrow on1.

cover) and insert batteries, using the polarity marks inside for reference. A battery indicator on the lower

left corner of the display indicates remaining power.

The camera has 16 MB of internal memory, so you can take photos anytime without using a card. To be2.

able to take more photos without having to stop and download them frequently, you may use SD cards

(not MMC cards) up to 32 GB capacity. Insert a new SD card ("upside down" with metal contacts facing

up) in the slot. The card will click into place. Push the card in slightly to release and remove it. Turn o

the camera’s power before inserting or removing a card. Cards that have been previously used in other

devices should be formatted by the camera before taking photos (see “Review Mode”: Format)

Pull the LCD display up to viewing position, by grasping the indented areas on each side. Briey press3.

the POWER button. The red power LED will turn on, and the LCD will display a “Bushnell” logo, then go

to black (to conserve battery life). Press the Display button to turn the LCD back on. Pressing Display

again will rst turn o all screen icons, then turn the entire display o (camera power remains on). The

entire camera will automatically turn o after one minute if it has been inactive (no buttons pressed).

This can be changed, using the“Auto O”option in the camera’s menu. To turn the camera o manually,

briey press the POWER button. The default camera settings will provide optimum quality under most

conditions, but you may want to set the date since it will be imprinted on photos by default (you can also

turn it o using the menu options).

To set the current date and time for imprinting, press4. MENU. Press the Down arrow key 7 times to

highlight “CLOCK SET”, then press MENU again. Now set the Year, Month, Date, Hour, and Minute, using

the Up/Down arrow keys to make changes, and the Right key to move to the next eld. Once the date

& time have been set, press the MENU button again. Press the Down arrow key once to highlight“DATE

STAMP”, press MENU, then highlight your preference: Month/Day/Year orYear/Month/Day order, or select

“OFF” if you don’t want to imprint the date on your photos. Press MENU to conrm your setting, then

keep pressing the down arrow key to highlight “Exit”. Press MENU again to return to the “live” preview

display. Note: you may need to reset the date/time after changing batteries.

To take a still photo, hold the camera steady with both hands and press the5. SNAP button. The camera

focus is preset to take sharp photos from approximately 35 feet to “innity”. To shoot a video, press the

right arrow key three times until the red movie camera icon appears at the top right corner of the display

(see below). You can then start shooting the video at any time by pressing SNAP. To stop recording the

video, press SNAP again. Note: if the power is turned o, then back on, the camera will return to still photo

mode.

When using a tripod, you can help avoid the eects of camera shake by plugging the supplied remote6.

shutter release into the jack above the SD card slot, and using the button on the remote rather than

SNAP to take photos.

To review or playback a still photo or video, press the7. View button. You will see the most recent still

photo or video (rst frame). To review previous photos or videos one at a time, press the Left arrow key.

The top left corner of the display will indicate “AVI” instead of “JPG” if the le is a video. The le number

is shown on the lower left of the display, and the resolution (of still photos) or length in seconds (for

videos) is shown on the right. To play back a video, press the SNAP button (press again to stop playback).

To see “thumbnail” images of multiple stored photos/videos at once, press the Display button. Use the

Left/Right arrow keys to select an individual le, then press Display again to see it full frame. To delete

a photo or video, press MENU. “DELETE ONE” is the rst option in the PLAY menu (only the currently

displayed photo/video will be deleted-use “FORMAT” if you want to delete all les from memory). Press

MENU again, then the Up arrow key to highlight OK. Press MENU to delete the photo or video, then press

View to return to the review screen. Press View again to switch to the live preview screen when you are

ready to take more photos or videos.

Your ImageView is ready to use right away- it is not necessary to “go into the menu” before taking photos.

However, your percentage of successful photos (especially under less than ideal conditions) will increase if

you read the rest of this manual and understand how to use the available options and settings, as well as the

section covering “Downloading the Photos & Videos to Your PC”.

Loading Batteries

Turn the ImageView over, and slide open the battery cover as indicated by

the arrow, setting it aside. Insert 2 AAA Alkaline or Lithium batteries into the

compartment in the direction indicated by the polarity marks inside, then

replace the cover and slide it back into place until it clicks. Note: Rechargeable

NiMh type batteries may also be used, but some may not deliver adequate

current to power the ImageView. AAA NiMh batteries with a current rating of

850 mAh or higher are recommended.

Using the Internal Memory and SD Cards

The camera’s 16 MB internal memory can store from a minimum of only 3-4 (at 3264x2440 resolution and

Best quality) up to hundreds of photos, depending on resolution and quality settings you choose in the

main menu. A “countdown” indicator on the lower left of the display shows the remaining number of photos

that the available memory can hold. When no more photos will t in the available storage, a “Memory Full!”

message appears. To expand the available storage, you may add an optional SD (Secure Digital) memory

card, with up to 32GB capacity. MMC cards, which look similar to SD cards, are not recommended. The card is

inserted into the slot on the back of the camera pod, with the “notched” corner on the left as indicated by the

card icon below the slot. Insert the SD card with the label side facing down. Note: be sure the power is turned

o before inserting or removing cards to prevent possible loss of les or damage to the card. A new card will

not require formatting, but a card that has been previously used in other devices (cameras, PDAs, etc) should

be formatted by the ImageView before beginning to take photos or videos (see “Format” in the Review Mode

section of this manual for details). Note that formatting will erase all les previously stored on the card,

so be sure they have been downloaded or copied rst if you wish to keep them.

Tripod

Socket

Battery

Compartment

(Slide Open

In Direction

of Arrow)

Basic Binocular and Camera Setup

Before you begin using it, you’ll probably want to take a few moments to set up the ImageView for your

individual eyesight and user preferences. Leave the rubber eyecups in their “up” position if you are not

wearing glasses, or roll them down if you are. Grasp the left and right sides of the binocular, and pull them

apart or push them together while looking through the binocular to adjust the eyepiece spacing until your

view is a single circular image. Find a distant object with ne detail (tree, sign, brick wall, etc), and adjust the

center focus knob until the object appears sharp when viewed through the left binocular eyepiece only. Then,

looking at the same object through just the right side of the binocular, simply rotate the right eyepiece until

the image is equally sharp for your right eye. This is called the diopter adjustment, and compensates for any

dierence in sight between your left and right eyes. Once set during this initial procedure, you can leave the

diopter adjustment alone and just use the center focus knob to bring objects at any distance into sharp focus

through the binoculars (the minimum focus distance is about 15 feet).

Your digital photos and videos are not aected by the center focus knob, as the camera lens located

between the binocular’s objective lenses does not require focusing. It is preset so that objects ranging from

approximately 50 feet and farther away will be in focus. Note that the binocular is capable of focusing closer

than the camera. Check the live preview image on the LCD display to make sure you are far enough away to

ensure sharp photos. The camera lens provides 8x magnication, which is the same as the binocular’s optics,

and is aligned so that and object centered in the binocular’s view will also be centered in your photos or

videos. Therefore, it is not necessary to have the LCD turned on or even raised while you are shooting photos

or videos. Reducing use of the LCD will extend battery life signicantly. Pressing the Display button will turn

the LCD screen o but leave the camera powered on, ready to take photos anytime you press SNAP.

You may want to go into the camera’s main menu and set the correct date before using the camera for the rst

time, since the date stamp (imprint) feature is turned on by default (but can be defeated if you wish). Please

refer to Step 4 under“Basic Setup” for details.

Taking Still Photos

After following the initial setup as described in the previous pages, you are ready to take a photo:

Raise the LCD and press the1. POWER button briey (red LED lights, Bushnell logo screen appears, then

display goes black). Press the Display button to turn on the LCD again if you want to see a preview of the

“live” image or check menu settings, battery condition, etc via the display icons.

The ImageView will default to high resolution and quality settings, as well as “everything on automatic”2.

when it is turned on for the rst time, so you can take excellent photos right away. If you prefer to use

dierent settings, refer to the section “Using the Main Menu” for directions regarding how to nd and

change settings such as resolution and exposure and other options.

You may compose your photo while looking through the binocular (the LCD does not need to be3.

on to take a photo). However, for the most accurate framing, checking the LCD preview display is

recommended.

Be sure you are not closer than approximately 50 feet from your subject. The binocular optics will focus4.

closer than this, but the camera focus is preset to take photos of distant subjects (no focusing is necessary

for the camera). The LCD may be used to verify that the subject is not too close for sharp results.

Hold the camera as steady as possible with both hands and slowly squeeze the5. SNAP button. The

display will “freeze” briey while the le is stored, then you are ready to take another photo. The 4-digit

counter on the lower left will count down to indicate the number of remaining photos as you use up the

available internal or card memory. Once the display indicates“Memory Full” when SNAP is pressed, you

are out of memory (storage space) and should download any photos you wish to keep so they may be

deleted, or you may remove the full card and install another SD card.

Digital zoom up to 3x is available. Press the6. Down arrow key to zoom in (note the“Wide to Tele”indicator

bar at the bottom of the display). Press the Up arrow key to zoom back out. No digital zoom is used

(optical magnication only) when the W>T zoom indicator bar goes out after you zoom all the way back

to the left (“W”).

Press the7. View button if you wish to check the photo after you take it, then press it again to return to a

live preview.

See the section “Review Mode” section for more detail about reviewing and deleting previously taken

photos.

Warning: Use care during handling to avoid touching the camera lens (located front center between the

binocular lenses) to prevent degrading the image quality.

Clean the camera lens only with dry lens tissue or microber cloth. DO NOT use liquids of any type.

Selecting and Using the Video Mode

Follow steps 1-4 on the previous page, “Taking Still Photos”1.

To change from still photo to video mode, press the Right arrow key 3 times, until the movie camera icon2.

is displayed at the top right area of the LCD. You are now in Video Mode. Press SNAP to start recording a

new video clip, and press it again to stop recording and store the video in memory. The recording time

is limited only by the amount of internal or card memory currently available. You may record a single

long video until you run out of memory, or multiple shorter videos by stopping and starting recording

whenever you wish by pressing SNAP. The counter on the right side of the display shows the elapsed

time in seconds since the recording was started.

Press the3. View button if you wish to check a video after you shoot it. Press the SNAP button to begin

playback, press it again to stop playback. Press the Left arrow key to review your previous video or

still photo les. Pressing the Display button will let you see a “thumbnail” review of multiple les-use

the arrow keys to highlight the le you wish to review, then press Display again to select and view it.

When you are ready to return to the live preview display to shoot more videos (or stills), press the View

button.

See the section “Review Mode” for more detail about reviewing and deleting previously taken videos.

Using The Main Menu-Options and Settings

As mentioned earlier in this manual, your ImageView is already set for high resolution and quality right out

of the box. Exposure, white balance, and other variables are set automatically. This means that you will get

good results for most subjects and lighting without the need to go into the menus and change any settings.

However, we recommend that you become familiar with the available options so that you can improve your

photos if, for example, you decide they are coming out too dark (common for snow scenes with most cameras),

or too green (under many uorescent lights). Press the Menu button to enter the main menu. Use Down or

Up arrow keys to highlight an option within the menu, then press MENU if you wish to change the settings

for that option. Use the Left/Right arrow keys to select the setting you want, then press MENU to conrm this

setting. The main menu contains a submenu, called “Resolution”, with separate settings for still photo and

video resolution. Select “Exit” after using the Resolution submenu to return to the main menu. Here are the

options and settings available in the main menu (Default settings are shown in Bold).

Option Settings Description

Image Size

(Resolution Submenu)

3264x2440(8MP*),

2550x1920(5MP*),

2048x1536(3MP),

1600x1200(2MP),

800x600(0.5MP)

Sets the still photo resolution in pixels. Higher resolution

settings produce sharper/larger prints but require more

storage space in internal or card memory. Use lower

settings to store more in memory, or for email, PC viewing

only, etc. (*resolution interpolated via internal software)

Video Size

(Resolution Submenu)

640x480/30fps,

640x480/15fps,

320x240/30fps,

320x240/15fps

Sets the video resolution (pixels per frame and frame rate).

Higher resolution/frame rate settings produce better/

smoother videos but require more storage space in

internal or card memory. Use lower settings to store more

in memory.

Andere Handbücher für ImageView 110833

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bushnell Fernglas Handbücher

Bushnell

Bushnell LEGEND BB842W Bedienungsanleitung

Bushnell

Bushnell Instant Replay 118325 Bedienungsanleitung

Bushnell

Bushnell ImageView 11-1026 Bedienungsanleitung

Bushnell

Bushnell 13-0805 Bedienungsanleitung

Bushnell

Bushnell 11-0512 Bedienungsanleitung

Bushnell

Bushnell ImageView 11-0718 Bedienungsanleitung

Bushnell

Bushnell ImageView 11-1210 Bedienungsanleitung

Bushnell

Bushnell FUSION X Bedienungsanleitung

Bushnell

Bushnell PRIME BP1025B Bedienungsanleitung

Bushnell

Bushnell ImageView 11-8200 Bedienungsanleitung

Bushnell

Bushnell H2O 138005 Bedienungsanleitung

Bushnell

Bushnell H2O 157050R Bedienungsanleitung

Bushnell

Bushnell Bear Grylls Bedienungsanleitung

Bushnell

Bushnell Image View 111026 Bedienungsanleitung

Bushnell

Bushnell 201930 Bedienungsanleitung

Bushnell

Bushnell ImageView 98-0917/04-09 Bedienungsanleitung

Bushnell

Bushnell ImageView 111211 Bedienungsanleitung

Bushnell

Bushnell Night Vision 26-3150 Bedienungsanleitung

Bushnell

Bushnell ImageView 11-1026 Bedienungsanleitung

Bushnell

Bushnell Night Vision 26-2036 Bedienungsanleitung

Bushnell

Bushnell Night Vision 26-2640 Bedienungsanleitung

Bushnell

Bushnell Compact Instant Replay 11-8323 Bedienungsanleitung

Bushnell

Bushnell 137501 Bedienungsanleitung

Bushnell

Bushnell IMAGE VIEW 111024 Bedienungsanleitung

Beliebte Fernglas Handbücher anderer Marken

Celestron

Celestron VistaPix 72218 Bedienungsanleitung

Levenhuk

Levenhuk Atom Digital DNM200 Bedienungsanleitung

ATN

ATN PS-15 Bedienungsanleitung

Bresser

Bresser TOPAS 7x50 Bedienungsanleitung

Berger & Schroter

Berger & Schroter LN-G3-B50 Bedienungsanleitung

Leica

Leica geovid 8x42 HD-R Bedienungsanleitung

Noblex

Noblex NF 8 x 42 inception Bedienungsanleitung

PHOTONIS

PHOTONIS VYPER Bedienungsanleitung

ATN

ATN 6015-WPT Bedienungsanleitung

Famous Trails

Famous Trails ViewCatcher DCB 822 Bedienungsanleitung

AGM

AGM EXPLORATOR FSB50-640 Bedienungsanleitung

Opticron

Opticron Marine-3 7x50 BIF.GA Installationsanleitung

Kayoba

Kayoba 009129 Bedienungsanleitung

Vixen

Vixen ARENA Series Bedienungsanleitung

MAGINON

MAGINON NVB 60 Bedienungsanleitung

Leica

Leica Geovid 56 Bedienungsanleitung

Leica

Leica GEOVID PRO Bedienungsanleitung

Celestron

Celestron LandScout Bedienungsanleitung