Canon EF 400mm f/2.8L IS II USM Bedienungsanleitung

EF400mm f/2.8L IS III USM

Instructions

ENG

ENG-1

Thank you for purchasing a Canon product.

Canon’s EF400mm f/2.8L IS III USM is an

Image Stabilizer-equipped super-telephoto

lens for use with EOS cameras.

 “IS” stands for Image Stabilizer.

 “USM” stands for Ultrasonic Motor.

Conventions used in these instructions

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

Camera Firmware

Please use the latest version of ﬁrmware with

the camera in use. For details on whether the

ﬁrmware is the latest version or not, and for

details on updating the ﬁrmware, please check

the Canon website.

ENG-2

Safety Precautions

Warning Details pertaining to risks that may

result in death or serious injury.

 Do not look directly at the sun or other strong

light sources through a lens or a single-lens reflex

camera with a lens attached. This may result in loss

of sight.

 Do not leave a lens in the sun without the lens cap

attached. The lens may concentrate entering sunlight

and cause a malfunction or ﬁre.

 Do not point a lens at the sun. Even when the

sun does not appear on the screen, the lens may

concentrate entering sunlight and cause a malfunction

or ﬁre.

 Where the lens is mounted on a camera, make sure

to properly support the lens. If you hold only the

camera, the lens may fall off the camera and cause a

malfunction or injury.

 Be sure to attach the included strap to the lens

when carrying a camera around with the lens

mounted on it. Using the strap for the camera may

allow the lens to fall off the camera and cause a

malfunction or injury.

Caution Details pertaining to risks that may

result in injury.

 Do not leave the product in places exposed to

extremely high or low temperatures. The product may

cause burns or injury when touched.

 Only mount the product on a tripod that is

sufficiently sturdy.

Caution Details pertaining to risks that may result in

damage to property.

 Do not leave the product in excessive heat such as in a

car in direct sunlight. High temperatures can cause the

product to malfunction.

Precautions to ensure that the camera is used

safely. Read these precautions thoroughly. Make

sure all details are observed in order to prevent

risks and injury to the user and other people.

ENG-3

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Do not make any changes or modiﬁcations to the equipment

unless otherwise speciﬁed in the instructions. If such changes

or modiﬁcations should be made, you could be required to

stop operation of the equipment.

This equipment has been tested and found to comply with

the limits for a class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

CAN ICES-3(B)/NMB-3(B)

ENG-4

General Precautions

Handling Precautions

 If the lens is taken from a cold environment into a warm

one, condensation may develop on the lens surface and

internal parts. To prevent condensation in this case, ﬁrst

put the lens into an airtight plastic bag before taking it

from a cold to warm environment. Then take out the lens

after it has warmed gradually. Do the same when taking

the lens from a warm environment into a cold one.

 Please also read any lens related handling precautions

listed in your camera’s instruction manual.

Shooting Precautions

 The lens’ focusing ring is electronic.

The lens will not focus when the focusing ring is turned

while the camera is turned off.

ENG-5

Nomenclature

 For detailed information, reference page numbers are provided in parentheses (→**).

Distance scale (→19)

Orientation locking knob

Security slot (covered) (→23)

Strap mount (→7)

Manual focus speed switch

(→15)

Rubber ring (→6)

Focus mode switch (→8)

Drop-in ﬁlter (→24)

Focusing distance range

selector switch (→9)

Tripod mount (→23)

Focus preset button (→11)

AF stop button (→10)

Lens mount index (→6)

Lens mount (→6)

Contacts (→6)

Hood mount (→19)

Playback ring (→11, 14)

Focusing ring (→8)

Image stabilizer switch (→16)

Image stabilizer mode selector switch (→16)

Focus preset switch (→11)

ENG-6

1. Attaching and Detaching the Lens

Attaching the Lens

Align the lens mount indexes of the lens and

camera, and turn the lens clockwise until you

hear a click.

Detaching the Lens

Turn the lens counterclockwise while pressing

the camera’s lens release button. Detach the

lens once it has stopped turning.

Please refer to the camera's instructions for

details.

 Set the camera’s power switch to OFF when

attaching or detaching the lens.

 After detaching the lens, place the lens with the

rear end up and attach the dust cap to prevent

the lens surface and contacts from getting

scratched. Make sure the lens and dust cap

mount indexes are aligned when attaching the

dust cap.

 Contacts that are scratched, soiled, or have

ﬁngerprints on them may result in faulty

connections or corrosion, which may lead to

malfunctions. If the contacts get soiled, clean

them with a soft cloth.

 The lens mount has a rubber ring to improve

dust-resistance and water-resistance

performance. This rubber ring may cause

friction marks to appear around the camera’s

lens mount, although this will have no effect on

usage.

 Since the lens is heavier than the camera, turn

the camera when attaching or detaching the

lens. Ensuring that the lens can rest safely on its

own is recommended, such as ﬁrst mounting it

on a tripod.

 Rubber rings can be replaced at a Canon

Service Center at cost.

Lens release

button

Lens mount index

Orientation locking knob

Security slot (covered) (→23)

ENG-7

2. Attaching the Strap

Thread the end of the strap through the strap

mount on the lens and then back through the

clasp on the strap. Pull the strap tight and check

that there is no slack in the clasp.

Strap mount

Included strap

 Before using the lens, check that the strap is

attached securely, that it is not worn (damaged),

etc.

ENG-8

3. Setting the Focus Mode

To shoot in autofocus (AF) mode, set the focus

mode switch to AF.

To use only manual focusing (MF), set the focus

mode switch to MF, and focus by turning the

focusing ring.

See p. 14 for information on power focus (PF).

 The lens’ focusing ring is electronic.

 When AF operation is set to [ONE SHOT],

manual focus is possible after autofocusing

has been completed by continuing to press the

shutter button halfway (Full-time manual focus).

There are times when camera setting changes

are required.

 When the AF button assignment is changed from

the “shutter button” (using the camera’s Custom

Function), manual focus is always possible

regardless if the shutter button is pressed

halfway any time the lens is not autofocusing.

Focusing ring

Focus mode switch

 Quickly turning the focusing ring may result in

delayed focus.

ENG-9

4. Setting the Focusing Distance Range

You can set the focusing distance range with a

switch. By setting a suitable focusing distance

range, the actual autofocusing time will be

shorter.

Focusing distance range

① FULL (2.5 m – ∞)

② 2.5 m – 7 m

③ 7 m – ∞

Focusing distance range selector switch

Andere Handbücher für EF 400mm f/2.8L IS II USM

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon EF 28-300mm f/3.5-5.6L IS USM Bedienungsanleitung

Canon

Canon CN-E30-105mm T2.8 L S Bedienungsanleitung

Canon

Canon HJ14EX4.3B IRSE Bedienungsanleitung

Canon

Canon EF 100mm f/2.8L MARCO IS USM Bedienungsanleitung

Canon

Canon EF 28-70mm 1:2.8 L USM Bedienungsanleitung

Canon

Canon KJ17ex7.7B Bedienungsanleitung

Canon

Canon EF 50mm 1:1.4 USM Bedienungsanleitung

Canon

Canon EF 70-300mm f/4.5-5.6 IS USM Bedienungsanleitung

Canon

Canon RF 10-20mm F4 L IS STM Bedienungsanleitung

Canon

Canon EF55-200mm f/4.5-5.6 II USM Bedienungsanleitung

Canon

Canon EF-M32mm f/1.4 STM Bedienungsanleitung

Canon

Canon EF300mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon CN-E24mm T1.5 L F Bedienungsanleitung

Canon

Canon ITS-ME Bedienungsanleitung

Canon

Canon digi super 86 XS Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF-S 18-135mm f/3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF500mm f/4L IS II USM Bedienungsanleitung

Canon

Canon FD Lens Handbuch

Canon

Canon EF-S24mm f/2.8 STM Bedienungsanleitung

Canon

Canon CN-E30-300mm T2.95-3.7 LS Bedienungsanleitung

Canon

Canon CN-E14-35mm T1.7 L SP Bedienungsanleitung

Canon

Canon LEF7020028CA Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung