Canon EF LENS TS-E24MM F/3.5L Bedienungsanleitung

TS-E24mm F3.5L

TS-E45mm F2.8

TS-E90mm F2.8

Instructions

ENG-1

Canon’s TS-E lenses are tilt-shift lenses

designed for EOS cameras. The tilt-shift

mechanism enables photographers to control

the depth of field and the area photographed

and to correct image distortion, making it

possible to take sophisticated pictures that

cannot be shot using a conventional lens.

●To ensure that you make the most of the TS-E lens

functionality, it is recommended that you use it with

an EOS camera with 100% viewfinder visibility

(EOS-1, EOS-1D or EOS-1Ds series) and use the

laser matte with grid focusing screen Ec-D and a

tripod.

●On EOS cameras with a built-in flash, some partial

restrictions may apply to the shift and rotation

functions.

●On EOS cameras equipped with a grip for vertical

shooting, some partial restrictions may apply to the

shift and rotation functions.

Features

1. The lens can be tilted up to ±8° and shifted up

to ±11mm.

2. The tilt and shift functions can be used singly

or in combination.

3. The lens can be rotated to change the tilt or

shift direction.

Conventions used in this instruction

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

Thank you for purchasing this Canon product.

ENG-2

aSafety Precautions

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such changes or

modifications should be made, you could be required to stop

operation of the equipment.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for

help.

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus as set out in the

interference-causing equipment standard entitled “Digital

Apparatus”, ICES-003 of the Industry Canada.

aSafety Precautions

1. Do not look at the sun or a bright light source

through the lens or camera. Doing so could result in

loss of vision. Looking at the sun directly through the

lens is especially hazardous.

2. Whether it is attached to the camera or not, do not

leave the lens under the sun without the lens cap

attached. This is to prevent the lens from concentrating

the sun’s rays, which could cause a fire.

aHandling Cautions

If the lens is taken from a cold environment into a

warm one, condensation may develop on the lens

surface and internal parts. To prevent condensation in

this case, first put the lens into an airtight plastic bag

before taking it from a cold to warm environment. Then

take out the lens after it has warmed gradually. Do the

same when taking the lens from a warm environment into

a cold one.

ENG-3

Nomenclature

For detailed information, reference page numbers are provided in parentheses (→**).

Tilt knob (→7)

Lens mount index (→5)

Contacts

Shift index

Shift scale (→9)

Shift knob (→9)

Depth-of-Field scale (→11)

Distance scale (→5,11)

Distance index

Infrared index (→11)

Tilt scale (→7)

Tilt index

ENG-4

Nomenclature

For detailed information, reference page numbers are provided in parentheses (→**).

Tilt lock knob (→7)

Rotation lock release button

(→10)

Shift lock knob (→9)

Filter mounting thread

(→14)

Lens

Hood mount (→13)

Focusing ring (→5)

Tilt index

Tilt scale (→7)

Shift index

Shift scale (→9)

ENG-5

Mounting and Detaching the Lens

Focus a TS-E lens by turning the focusing ring.

(Shots cannot be taken using the auto focus.)

See your camera’s instructions for details on

mounting and detaching the lens.

2. Focusing

●When mounting or detaching the lens, always

ensure that the tilt and shift scales are set to the

“0” position.

●After detaching the lens, place the lens with the

rear end up to prevent the lens surface and

contacts from getting scratched.

●If the contacts get soiled, scratched, or have

fingerprints on them, corrosion or faulty

connections can result. The camera and lens

may not operate properly.

●If the contacts get soiled or have fingerprints on

them, clean them with a soft cloth.

●If you remove the lens, cover it with the dust

cap. To attach it properly, align the lens mount

index and the index of the dust cap, and turn

clockwise. To remove it, reverse the order.

●After using tilt or shift, readjust the focus.

●The distance scale is only valid when the tilt

scale is set to the “0” position.

ENG-6

3. Tilt Function

Tilting inclines the lens relative to the image plane. When the tilt scale is set to the “0” position, the

focusing and imaging planes are parallel. However, tilting puts the focusing plane at an angle to the

imaging plane.

●Example 1 ●Example 2

To shoot so that all of an extensive subject is in focus, you must normally use a small aperture to

obtain a large depth of field. But tilting allows you to keep all of the subject in focus even when there

is insufficient depth of field (Example 1). Or, by tilting in the opposite direction, you can focus on a

specific part of the subject (Example 2).

ENG-7

Turn the tilt lock knob in the

direction of the arrow to lock

the amount of tilt for the

shot.

Loosen the tilt lock knob by

turning it in the direction of

the arrow.

Turn the tilt knob to adjust

the amount of tilt. Focus the

shot by turning the focusing

ring.

Using Tilt

●When you tilt the lens, sharp portions of the tilt mechanism are exposed and care should be taken to avoid

touching these portions.

●If you use the tilt and shift functions on the TS-E24mm f/3.5L at the same time, only use them within the

area of the light-gray tilt scale settings. Tilting the lens to other settings may cause vignetting.

However, if the tilt function is used alone, none of the tilt scale settings cause vignetting.

ENG-8

4. Shift Function

Shifting moves the optical axis of the lens in parallel off the center of the imaging plane.

Shift can be used to good effect in the situations shown below.

●If you photograph a subject such as a

building with a normal lens, the top of

the building tapers away. But by placing

the camera parallel to the building and

shifting the lens, you can correct this

tapering effect.

●When you are shooting a reflective

subject, you can move the camera to a

position where the camera does not

appear in the shot and then use shift to

take the picture. This lets you keep the

camera out of the shot without having

to change the shot composition.

Andere Handbücher für EF LENS TS-E24MM F/3.5L

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon EF 17-40mm f/4L USM Bedienungsanleitung

Canon

Canon KJ17ex7.7B Bedienungsanleitung

Canon

Canon EF-S 17-85mm f/4-5.6 IS USM Bedienungsanleitung

Canon

Canon SUPER E47 Bedienungsanleitung

Canon

Canon YJ12x6.5B IRS-A Bedienungsanleitung

Canon

Canon EF 75-300 mm F4-5 Bedienungsanleitung

Canon

Canon EF14mm f/2.8L II USM Bedienungsanleitung

Canon

Canon EF-S60mm f/2.8 MACRO USM Bedienungsanleitung

Canon

Canon CN-E30-300mm T2.95-3.7L SP Bedienungsanleitung

Canon

Canon IMAGE STABILIZER ULTRASONIC EF300MM f/4L IS... Bedienungsanleitung

Canon

Canon EF 28-300mm f/3.5-5.6L IS USM Bedienungsanleitung

Canon

Canon EF 28-70mm 1:2.8 L USM Bedienungsanleitung

Canon

Canon EOS 5D Mark IV + 70-200mm Bedienungsanleitung

Canon

Canon EF LENS TS-E24MM F/3.5L Bedienungsanleitung

Canon

Canon EF24-105MM Bedienungsanleitung

Canon

Canon 9808B002 Bedienungsanleitung

Canon

Canon EF11-24mm f/4L USM Bedienungsanleitung

Canon

Canon EF 500mm 1:4.5 L USM Bedienungsanleitung

Canon

Canon RF 100-500mm F4.5-7.1 L IS USM Bedienungsanleitung

Canon

Canon EF 8-15mm f/4L Fisheye USM Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF 50mm 1:1.0L Bedienungsanleitung

Canon

Canon EF-S18-135mm f/3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF-S10-18mm f/4.5-5.6 IS STM Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung