Canon EF LENS TS-E24MM F/3.5L Bedienungsanleitung

TS-E24mm f/3.5LTS-E24mm f/3.5L

TS-E45mm f/2.8TS-E45mm f/2.8

TS-E90mm f/2.8TS-E90mm f/2.8

Instructions

EENNGG

007544H1JEFSKFOR.qxd10.2.163:57PMページ2

COPY

ENG-1

Canon’s TS-E lenses are tilt-shift lenses

designed for EOS cameras. The tilt-shift

mechanism enables photographers to control

the depth of field and the area photographed

and to correct image distortion, making it

possible to take sophisticated pictures that

cannot be shot using a conventional lens.

●To ensure that you make the most of the TS-E lens

functionality, it is recommended that you use it with

an EOS camera with 100% viewfinder visibility

(EOS-1, EOS-1D or EOS-1Ds series) and use the

laser matte with grid focusing screen Ec-D and a

tripod.

●On EOS cameras with a built-in flash, some partial

restrictions may apply to the shift and rotation

functions.

●On EOS cameras equipped with a grip for vertical

shooting, some partial restrictions may apply to the

shift and rotation functions.

Features

1. The lens can be tilted up to ±8° and shifted up

to ±11mm.

2. The tilt and shift functions can be used singly

or in combination.

3. The lens can be rotated to change the tilt or

shift direction.

Conventions used in this instruction

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

Thank you for purchasing a Canon product.

02-7544_ENG 10.2.13 9:42 AM Page 1

COPY

ENG-2

aSafety Precautions

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such changes or

modifications should be made, you could be required to stop

operation of the equipment.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for

help.

This Class B digital apparatus complies with Canadian ICES-003.

aSafety Precautions

●

Do not look at the sun or a bright light source

through the lens or camera. Doing so could result in

loss of vision. Looking at the sun directly through the

lens is especially hazardous.

●

Whether it is attached to the camera or not, do not

leave the lens under the sun without the lens cap

attached. This is to prevent the lens from concentrating

the sun’s rays, which could cause a fire.

Handling Cautions

●If the lens is taken from a cold environment into a

warm one, condensation may develop on the lens

surface and internal parts. To prevent condensation

in this case, first put the lens into an airtight plastic bag

before taking it from a cold to warm environment. Then

take out the lens after it has warmed gradually. Do the

same when taking the lens from a warm environment

into a cold one.

●Do not leave the lens in excessive heat such as in a

car in direct sunlight. High temperatures can cause

the lens to malfunction.

02-7544_ENG 10.2.13 9:42 AM Page 2

COPY

ENG-3

Nomenclature

For detailed information, reference page numbers are provided in parentheses (→**).

Tilt knob (→7)

Lens mount index (→5)

Contacts

Shift index

Shift scale (→9)

Shift knob (→9)

Depth-of-Field scale (→11)

Distance scale (→5, 11)

Distance index

Infrared index (→11)

Tilt scale (→7)

Tilt index

02-7544_ENG 10.2.13 9:42 AM Page 3

COPY

ENG-4

Nomenclature

For detailed information, reference page numbers are provided in parentheses (→**).

Tilt lock knob (→7)

Rotation lock release button

(→10)

Shift lock knob (→9)

Filter mounting thread

(→14)

Lens

Hood mount (→13)

Focusing ring (→5)

Tilt index

Tilt scale (→7)

Shift index

Shift scale (→9)

02-7544_ENG 10.2.13 9:42 AM Page 4

COPY

ENG-5

Mounting and Detaching the Lens

Focus a TS-E lens by turning the focusing ring.

(Shots cannot be taken using the auto focus.)

See your camera’s instructions for details on

mounting and detaching the lens.

2. Focusing

●When mounting or detaching the lens, always

ensure that the tilt and shift scales are set to the

“0” position.

●After detaching the lens, place the lens with the

rear end up to prevent the lens surface and

contacts from getting scratched.

●If the contacts get soiled, scratched, or have

fingerprints on them, corrosion or faulty

connections can result. The camera and lens

may not operate properly.

●If the contacts get soiled or have fingerprints on

them, clean them with a soft cloth.

●If you remove the lens, cover it with the dust

cap. To attach it properly, align the lens mount

index and the index of the dust cap, and turn

clockwise. To remove it, reverse the order.

●After using tilt or shift, readjust the focus.

●The distance scale is only valid when the tilt

scale is set to the “0” position.

02-7544_ENG 10.2.13 9:42 AM Page 5

COPY

ENG-6

3. Tilt Function

Tilting inclines the lens relative to the image plane. When the tilt scale is set to the “0” position, the

focusing and imaging planes are parallel. However, tilting puts the focusing plane at an angle to the

imaging plane.

●Example 1 ●Example 2

To shoot so that all of an extensive subject is in focus, you must normally use a small aperture to

obtain a large depth of field. But tilting allows you to keep all of the subject in focus even when there

is insufficient depth of field (Example 1). Or, by tilting in the opposite direction, you can focus on a

specific part of the subject (Example 2).

02-7544_ENG 10.2.13 9:42 AM Page 6

COPY

ENG-7

Turn the tilt lock knob in the

direction of the arrow to lock

the amount of tilt for the

shot.

Loosen the tilt lock knob by

turning it in the direction of

the arrow.

Turn the tilt knob to adjust

the amount of tilt. Focus the

shot by turning the focusing

ring.

Using Tilt

●When you tilt the lens, sharp portions of the tilt mechanism are exposed and care should be taken to avoid

touching these portions.

●If you use the tilt and shift functions on the TS-E24mm f/3.5L at the same time, only use them within the

area of the light-gray tilt scale settings. Tilting the lens to other settings may cause vignetting.

However, if the tilt function is used alone, none of the tilt scale settings cause vignetting.

02-7544_ENG 10.2.13 9:42 AM Page 7

COPY

ENG-8

4. Shift Function

Shifting moves the optical axis of the lens in parallel off the center of the imaging plane.

Shift can be used to good effect in the situations shown below.

●If you photograph a subject such as a

building with a normal lens, the top of

the building tapers away. But by placing

the camera parallel to the building and

shifting the lens, you can correct this

tapering effect.

●When you are shooting a reflective

subject, you can move the camera to a

position where the camera does not

appear in the shot and then use shift to

take the picture. This lets you keep the

camera out of the shot without having

to change the shot composition.

02-7544_ENG 10.2.13 9:42 AM Page 8

COPY

ENG-9

Using Shift

Turn the shift lock knob in

the direction of the arrow to

lock the amount of shift for

the shot.

Loosen the shift lock knob

by turning it in the direction

of the arrow.

Turn the shift knob to adjust

the amount of shift. Focus

the shot by turning the

focusing ring.

●When you shift the lens, sharp portions of the shift mechanism are exposed and care should be taken to

avoid touching these portions.

●If you use the tilt and shift functions on the TS-E24mm f/3.5L at the same time, only use them within the

area of the light-gray shift scale settings. Shifting the lens to other settings may cause vignetting.

With large amounts of shift, the amounts of peripheral light at the top and bottom or left and right sides of the

screen may differ, so shooting with a small aperture is recommended.

02-7544_ENG 10.2.13 9:42 AM Page 9

COPY

Andere Handbücher für EF LENS TS-E24MM F/3.5L

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon EF100-400mm f/4.5-5.6L IS II USM Bedienungsanleitung

Canon

Canon EF-M 18-55mm f3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF 50mm 1:2.5 MACRO(COMPACT Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon digi super 100 XS Bedienungsanleitung

Canon

Canon 4573C002 Bedienungsanleitung

Canon

Canon EF-555-250mm f/4-5.6 IS STM Bedienungsanleitung

Canon

Canon FD 35 - 70 mm Bedienungsanleitung

Canon

Canon EF40mm f/2.8 STM Bedienungsanleitung

Canon

Canon XL Bedienungsanleitung

Canon

Canon EF 100mm f/2.8 Macro USM Bedienungsanleitung

Canon

Canon CN-E45-135mm T2.4 L F Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF-16 Bedienungsanleitung

Canon

Canon EF50mm f/1.0L USM Bedienungsanleitung

Canon

Canon EF 70-300mm f/4.5-5.6 IS USM Bedienungsanleitung

Canon

Canon RF 100-500mm F4.5-7.1 L IS USM Bedienungsanleitung

Canon

Canon EF 500mm 1:4.0L IS (ULTRASONIC) Bedienungsanleitung

Canon

Canon CJ12ex4.3B Bedienungsanleitung

Canon

Canon EF 600mm 1:4.0L IS (ULTRASONIC Bedienungsanleitung

Canon

Canon KH21ex5.7 IRSE Bedienungsanleitung

Canon

Canon RF15-30mm F4.5-6.3 IS STM Bedienungsanleitung

Canon

Canon EF 400 Bedienungsanleitung

Canon

Canon Digisuper 86 TELE Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung