Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Thank you for purchasing aCanon product.

Dedicated to EOS cameras, the Canon EF70-

200mm f/2.8L

USM lens is ahigh-

performance telephoto zoom lens equipped

with

Image Stabilizer.

•"IS" stands for Image Stabilizer.

•"USM" stands for Ultrasonic Motor.

Conventions used

this instruction

••

Warning to prevent lens or camera malfunction

or damage.

[j]

Supplementary notes

using the lens and

taking pictures.

ENG-1

Features

The Image Stabilizer gives the equivalent

effect of ashutter speed four stops faster*.

With fluorite and

lens elements,

outstanding image delineation

obtained.

Ultrasonic motor (USM) for quick and quiet

autofocusi

ng.

Manual focusing

available after the subject

comes into focus

autofocus mode (ONE

SHOT AF).

Atruly round aperture hole results

anicer

background blur.

The lens

compatible with Extender

EF1

.4X

and EF2X

II.

Tight seal structure ensures excellent dust-

proof and drip-proof performance.

*Based

[1/focal length] second. Generally, it requires

ashutter speed [1/focal length] second or faster

prevent camera shake.

[& Safety Precautions

Do not look at the sun or abright light source

through the lens or camera. Doing so could result

loss of vision. Looking at the sun directly through the

lens is especially hazardous.

Whether it is attached to the camera or not, do

not leave the lens under the sun without the lens

cap attached. This is to prevent the lens from

concentrating the sun's rays, which could cause afire.

Handling Cautions

the lens

taken from acold environment into a

warm

one,

condensation may develop

the lens surface

and

internal parts.

prevent condensation

this case, first

put the lens into

airtight plastic bag before taking

from

acold to warm environment. Then take out the lens after it

has warmed gradually.

the same when taking the lens

from awarm environment into acold one.

This device complies with Part 15 of the FCC Rules. Operation

SUbject

to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

not make any changes or modifications to the equipment

unless otherwise specified

the instructions. If such changes or

modifications should

made, you could be required

stop

operation of the equipment.

This equipment has been tested and found to comply with the

limits for aclass Bdigital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference

aresidential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used

accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur

aparticular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user

encouraged to try to correct the interference by one or more of

the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Consult the dealer or

experienced radio/TV technician for

help.

This Class Bdigital apparatus complies with Canadian ICES-003.

ENG-2

-Rubber ring

Contacts

--------

Filter mounting

thread

13)

...--

Focusing distance range selection switch

Distance scale

11)

..........

-Zoom ring

For detailed information, reference page numbers are provided

parentheses

**).

ENG-3

See your camera's instructions for details

mounting and detaching the lens.

011

oThe lens mount has arubber ring for enhanced

water- and dust-resistance. The rubber ring may

cause slight abrasions around the camera's lens

mount, but this will not cause any problems. If the

rubber ring becomes worn, it

replaceable by a

Canon Service Center at cost.

•After detaching the lens, place the lens with the

rear end

to prevent the lens surface and

electrical contacts from getting scratched.

•If the contacts get soiled, scratched, or have

fingerprints

them, corrosion or faulty

connections can result. The camera and lens

may not operate properly.

•If the contacts get soiled or have fingerprints

them, clean them with asoft cloth.

•If you remove the lens, cover

with the dust

cap.

attach it properly, align the lens mount

index and the 0index of the dust cap as shown

the diagram, and turn clockwise.

remove

it,

reverse the order.

ENG-4

shoot in autofocus (AF) mode, set the focus

mode switch to

AF.

use only manual focusing (MF), set the focus

mode switch to

MF,

and focus by turning the

focusing ring. The focusing ring always works,

regardless of the focus mode.

III

After autofocusing

ONE SHOT AF mode, focus

manually by pressing the shutter button halfway

and turning the focusing ring. (Full-time manual

focus)

ENG-5

~1.2m-OO~

U.,~m-oo

CUJ)

,.~

rtTJr)l

You

can set the focusing distance range to

1.2 m/3.9 ft. to infinity or 2.5 m/8.2

ft.

to infinity.

By setting the suitable focusing distance range,

the actual autofocusing time can be shorter.

zoom, turn the zoom ring.

UBe sure to finish zooming before focusing.

Zooming after focusing can affect the focus.

ENG-6

The ET-87 hood can keep unwanted light out of the lens, and also protects the front of the lens from

rain, snow, and dust.

Attaching

attach the hood, align the hood's attachment

position mark with the red dot

the front of the

lens, then turn the hood as shown by the arrow

until the lens'

red

dot

aligned with the

hood1s

stop position mark.

Button

Removing

remove the hood, hold down the button

the

side and turn the hood

the direction of the

arrow until the position mark

the hood aligns

with the

red

dot.

The hood can be reverse-mounted on the lens

for storage.

o ·Part of the picture may be blocked if the hood is not attached properly.

•When attaching or detaching the hood, grasp the base of the hood to turn

it.

prevent deformation, do not

grasp the rim of the hood to turn

it.

ENG-7

You

can use the image stabilizer

AF or MF mode.

ONI

OFF

(~~)

''-

STABILIZER

(I MODE I

CJU)

~!I!1'!I~

..• Ir

STABILIZER

I(iii

,'"

'~jioDE~K

=:J

,.-

~-

I-

~=--:

i--

f-.-

r=---=:J

1Set the STABILIZER switch

??;

ON.

•

you are not going to use the

image stabilizer function, set

the switch to 0

FF.

2Select the stabilizer mode.

•MODE

Corrects vibrations

all directions. It is mainly

effective for shooting still

subjects.

•MODE

compensates for

vertical camera shake during

following shots

ahorizontal

direction, and compensates for

horizontal camera shake

during following shots

vertical direction.

3When you press the shutter

button halfway, the Image

Stabilizer will start

operating.

•Make sure the image

the

viewfinder

stable, then press

the shutter button the rest of

the way down to take the

picture.

ENG-8

The image stabilizer

this lens

effective for hand-held shots under the following conditions.

•MODE 1 • MODE 2

OFF

•

semi-darkened areas such

indoors or •When panning subjects

motion.

outdoors at night.

• In locations where flash photography is

prohibited, such as art museums and theater

stages.

•

situations where your footing

uncertain.

•

situations where fast shutter settings cannot

used.

ENG-9

Andere Handbücher für EF 70-200mm f/2.8L IS II USM

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon EF 50mm1:1.8 Bedienungsanleitung

Canon

Canon EF100-400mm f/4.5-5.6L IS II USM Bedienungsanleitung

Canon

Canon EF 200mm f/2L IS USM Bedienungsanleitung

Canon

Canon EF-S 17-85mm f/4-5.6 IS USM Bedienungsanleitung

Canon

Canon EF 17-40mm f/4L USM Bedienungsanleitung

Canon

Canon TL-30.5 Bedienungsanleitung

Canon

Canon FD Lens Bedienungsanleitung

Canon

Canon EF35mm f/1.4L USM Bedienungsanleitung

Canon

Canon XJ27x6.5B AF Bedienungsanleitung

Canon

Canon EF 300mm 1:4.0 L IS USM Bedienungsanleitung

Canon

Canon EF11-24mm f/4L USM Bedienungsanleitung

Canon

Canon EF 50mm 1:1.4 USM Bedienungsanleitung

Canon

Canon EF LENS TS-E24MM F/3.5L Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8 L IS II USM Bedienungsanleitung

Canon

Canon EOS 5D Mark IV + 70-200mm Bedienungsanleitung

Canon

Canon EF 35~350 mm f/3,5-5,6 L Bedienungsanleitung

Canon

Canon EF 75-300mm f/4-5.6 III USM Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF 400mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF-S35MM F/2.8 MACRO IS STM Bedienungsanleitung

Canon

Canon 540EZ - Speedlite - Hot-shoe clip-on Flash Bedienungsanleitung

Canon

Canon IMAGE STABILIZER ULTRASONIC EF300MM f/4L IS... Bedienungsanleitung

Canon

Canon KJ22ex7.6B IRSE Betriebsanleitung

Canon

Canon EF-S60mm f/2.8 MACRO USM Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung