Canon RF 200-800mm F6.3-9 IS USM Bedienungsanleitung

ENG

Instructions

ENG-1

Thank you for purchasing a Canon product.

Canon RF200-800mm F6.3-9 IS USM is a

telephoto zoom lens for use with EOS R series

cameras.

z“IS” stands for Image Stabilizer.

z“USM” stands for Ultrasonic Motor.

Camera Firmware

Please use the latest version of firmware with the

camera in use. For details on whether the firmware is

the latest version or not, and for details on updating

the firmware, please check the Canon website.

Conventions used in these instructions

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

ENG-2

Safety Precautions

Precautions to ensure that the camera is used

safely. Read these precautions thoroughly. Make

sure all details are observed in order to prevent

risks and injury to the user and other people.

Warning Details pertaining to risks that may

result in death or serious injury.

zDo not look directly at the sun or other strong

light sources through a lens. This may result in

loss of sight.

zDo not point the lens or camera at the sun

or photograph it. This is because the lens

concentrates the sun’s rays even when the sun

is outside the image area or when shooting with

backlight, which could cause malfunction or fire.

zDo not leave a lens in the sun without the lens

cap attached. The lens may concentrate entering

sunlight and cause a malfunction or fire.

zWhere the lens is mounted on a camera, make

sure to properly support the lens. If you hold only

the camera, the lens may fall off the camera and

cause a malfunction or injury.

zBe sure to attach the included strap to the lens

when carrying a camera around with the lens

mounted on it. Using the strap for the camera may

allow the lens to fall off the camera and cause a

malfunction or injury.

Caution Details pertaining to risks that may

result in injury or damage to other

objects.

zDo not leave the product in places exposed to

extremely high or low temperatures. The product

may cause burns or injury when touched.

zDo not insert your hand or fingers into the

product. This may result in injury.

zAttach a tripod or monopod that is sufficiently

sturdy to the tripod mount on the lens.

ENG-3

Handling Precautions

zDo not leave the product in excessive heat such as

in a car in direct sunlight. High temperatures can

cause the product to malfunction.

zIf the lens is taken from a cold environment into a

warm one, condensation may develop on the lens

surface and internal parts. To prevent condensation

in this case, first put the lens into an airtight

plastic bag before taking it from a cold to warm

environment. Then take out the lens after it has

warmed gradually. Do the same when taking the

lens from a warm environment into a cold one.

zThe lens interior may appear to waver, but this

does not indicate a defect or failure, and will not

cause any problems in use.

zIn order to optimize aperture control, there are

occasions in which the diaphragm blades will

move during zooming and focusing, even when

the aperture value is set for aperture priority AE or

manual exposure, etc.

zPlease also read any lens related handling

precautions listed in your camera’s instruction

manual.

General Precautions

ENG-4

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such

changes or modifications should be made, you could be

required to stop operation of the equipment.

This equipment has been tested and found to comply with

the limits for a class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

CAN ICES-3 (B) / NMB-3 (B)

ENG-5

zFordetailedinformation,referencepagenumbersareprovidedinparentheses(→**).

Nomenclature

Filter mounting thread

(→18)

Focus mode/control

selector switch (→8)

Image stabilizer

switch (→13)

Strap mount (→7)

Hood mount

(→15)

Zoom ring (→10,11)

Focusing/control ring (→8)

Contacts (→6)

Rubber ring (→6)

Lens mount (→6)

Lens mount index (→6)

Orientation locking knob (→16)

Tripod mount (→16)

Zoom position index (→10)

Lens Function Buttons

(AF Stop Buttons) (→12)

Adjustment ring (→11)

ENG-6

Lens mount index

Lens release button Dust cap

1. Attaching and Detaching the Lens1. Attaching and Detaching the Lens

Attaching the Lens

Align the lens mount indexes of the lens and

camera, and turn the lens clockwise until you

hear a click.

Detaching the Lens

Turn the lens counterclockwise while pressing

the camera’s lens release button. Detach the

lens once it has stopped turning.

Please refer to the camera’s instructions for

details.

zSet the camera’s power switch to OFF when

attaching or detaching the lens.

zAfter detaching the lens, place the lens with the

rear end up and attach the dust cap to prevent

the lens surface and contacts from getting

scratched. Make sure the lens and dust cap

mount indexes are aligned when attaching the

dust cap.

zContacts that are scratched, soiled, or have

fingerprints on them may result in faulty

connections or corrosion, which may lead to

malfunctions. If the contacts get soiled, clean

them with a soft cloth.

zThe lens mount has a rubber ring to improve

dust-resistance and water-resistance

performance. This rubber ring may cause

friction marks to appear around the camera’s

lens mount, although this will have no effect on

usage.

zSince the lens is heavier than the camera, turn

the camera when attaching or detaching the

lens. Ensuring that the lens can rest safely on its

own is recommended, such as first mounting it

on a tripod.

zRubber rings can be replaced at a Canon

Service Center. (chargeable)

ENG-7

2. Attaching the Strap

Thread the end of the strap through the strap

mount on the lens and then back through the

clasp on the strap. Pull the strap tight and check

that there is no slack in the clasp.

zBefore using the lens, check that the strap is

attached securely, that it is not worn (damaged),

etc.

Strap mount

Included strap

ENG-8

3. Focusing/Control ring

The focusing/control ring can be used as either a

focusing ring or a control ring.

Focusing/Control ring

Focus mode/control selector switch

Use as a Focusing Ring

Set the focus mode/control selector switch to AF

or MF.

To shoot in autofocus (AF) mode, set the focus

mode/controlselectorswitchtoAF.Table*1

To use only manual focusing (MF), set the focus

mode/control selector switch to MF, and focus by

turning the focusing ring (focusing/control ring).

Table*2

Table: List of Focus Mode and Focusing/Control

Ring Functions Using the Focus Mode/

Control Selector Switch

Focus mode/

Control selector switch

*1AF *3CONTROL *2MF

Focus mode AF *4AF/*5MF MF

Focusing/

control ring

functions

Focusing ring

Control ring

Focusing ring

Use as a Control Ring

Set the focus mode/control selector switch to

CONTROL.Table*3

Set the control ring function using the camera’s

menu. The control ring can be assigned the

functions that are commonly used with cameras,

such as shutter speed and aperture settings.

Please refer to the camera’s instructions for

details on how to use the control ring.

ENG-9

zDelayed focus may occur if the focusing ring

(focusing/control ring) is quickly turned.

zSetting the focus mode/control selector switch to

CONTROLwillfixthefocusmodeasAF.Table*4

However, depending on the camera used, it is

possible to switch the focus mode to MF on the

camera.Table*5

Please refer to the camera’s instructions for

details.

Focusing/Control ring

zThe lens’ focusing ring (focusing/control ring) is

electronic.

zWith a camera capable of electronic full-time

manual focus, manual focusing is possible while

the camera is operable. However, this requires a

change in camera settings.

zWhen AF operation is set to One-Shot AF,

manual focus is possible after autofocusing

has been completed by continuing to press the

shutter button halfway (electronic manual focus

function). However, this requires a change in

camera settings.

zWhen movie recording, the AF speed will be

slower than the still photo shooting mode. It is

possible to adjust the AF speed on the camera

by setting Movie Servo AF to [Enable].

Please refer to the camera’s instructions for

details.

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon EF24-105MM F/4L IS USM Bedienungsanleitung

Canon

Canon EF 300 mm F4L IS Bedienungsanleitung

Canon

Canon MP-E 65mm f/2.8 1-5x Macro Photo Bedienungsanleitung

Canon

Canon RF 35mm F1.8 MACRO IS STM Bedienungsanleitung

Canon

Canon EF-S18-55mm f/3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF35mm f/1.4L USM Bedienungsanleitung

Canon

Canon EF-M 18-55mm f3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon digi super 86 XS Bedienungsanleitung

Canon

Canon EF-M32mm f/1.4 STM Bedienungsanleitung

Canon

Canon CN7x17 KAS S/E1 Bedienungsanleitung

Canon

Canon CN-E14.5-60mm T2.6 L S Bedienungsanleitung

Canon

Canon EF LENS TS-E24MM F/3.5L Bedienungsanleitung

Canon

Canon EF 28-80mm 1:2.8-4.0L USM Bedienungsanleitung

Canon

Canon CN-E24mm T1.5 L F Bedienungsanleitung

Canon

Canon CN-E30-300mm T2.95-3.7 LS Bedienungsanleitung

Canon

Canon EF-S18-135mm f/3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon Ultrasonic EF50mm f/1.2L USM Bedienungsanleitung

Canon

Canon SUPER E47 Bedienungsanleitung

Canon

Canon EF 70-200mm Bedienungsanleitung

Canon

Canon ULTRASONIC EF85MM F Bedienungsanleitung

Canon

Canon KJ10EX4.5B IRSE Bedienungsanleitung

Canon

Canon EF 70-300mm f/4.5-5.6 IS USM Bedienungsanleitung

Canon

Canon EF135MM F/2L USM Bedienungsanleitung

Canon

Canon CN-E30-300mm T2.95-3.7L SP Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung