Canon Color Network Printer Unit-D1 Bedienungs- und Wartungshandbuch

接続機器にPSプリントサーバユニット-D1を取り付ける際はこの手順に従って下さい。

image PASS-D1/Color Network Printer Unit-D1

Installation Procedure

Follow the instructions herein when installing the image PASS-D1/Color Network Printer Unit-

D1 to its host machine. ENGLISH

PSプリントサーバユニット-D1

設置手順書

日本語

FRANÇAIS

DEUTSCH

ITALIANO

Module Imprimante Couleur reseau-D1 Procédure

d’Installation

Suivre les instructions suivantes pour l’installation de Module Imprimante Couleur reseau-D1.

Farbdruckerkarte D1 Installation

Beachten Sie bitte bei der Installation der Farbdruckerkarte D1 in die Hosteinheit die Anleitungen.

Unità D-1 Stampante di rete a colori Procedura di

installazione

Seguire le istruzioni qui di seguito durante l’installazione Unità D-1 Stampante di rete a colori

alla macchina host corrispondente.

F-IM-6262-020cover.p65 04/04/20, 12:03Page 1 AdobePageMaker6.5J/Win

– 2 –

imagePASS-D1/Color Network Printer

Unit-D1 Installation Procedure

Follow the instructions in this booklet when installing the imagePASS-D1/Color Network Printer Unit-D1 to its

host machine.

1 Checking the Contents

Fig. 1-1

[1] Unit ............................................................ 1 pc.

[2] Open I/F PCB ............................................. 1 pc.

[3] Communications cable ............................... 1 pc.

[4] Power cable ................................................. 1 pc.

[5] Cross Ethernet cable ................................... 1 pc.

[6] Cable clamp ................................................ 4 pc.

[7] Stepped screw ............................................. 2 pc.

[8] RS tightening screw (w/ washer) ................ 4 pc.

[5] [6] [7] [8]

[1] [2] [3] [4]

F-IM-6262-020e.p65 04/04/20, 17:40Page 2 AdobePageMaker6.5J/Win

– 3 –

2 Installation

2.1 Before Starting the Work

• Host Machine’s Service Mode

Make the following selections in service mode, and

set the item to ‘3’: COPIER>OPTION>INT-

FACE>IMAGE-CONT (so that the IP address used

for communication between host machine and the

server unit will automatically be set up).

• Make sure that the site of installation meets the fol-

lowing spatial requirements:

Fig. 2-1

2.2 Installing to the Host Machine

Before stating the work, be sure to go

through the following in strict order on

the host machine:

1. turn off the control panel power

switch.

2. turn off the main power switch.

3. disconnect the power cable (of the

wall outlet).

Fig. 2-2

1) Open the cable clamp [1] of the host machine’s up-

per rear cover.

2) Disconnect the connector [2], and disconnect the

DDIS cable [3].

Fig. 2-3

3) Remove the 7 screws [1], and detach the upper rear

cover [2].

Fig. 2-4

20 cm min.

(rear)

Machine

(front)

Host machine

[1]

[2]

OFF

[3] Disconnect

[1]

[2]

[3]

[2]

[1]

[2]

F-IM-6262-020e.p65 04/04/20, 17:40Page 3 AdobePageMaker6.5J/Win

–4 –

4) Remove the 12 screws [1], and detach the control-

ler box cover [2].

Fig. 2-5

5) Mount the open I/F PCB.

• If the Host Machine Is Not Equipped with a UFR

Board

Remove the 2 screws [1], and detach the face plate [2]

shown in the figure. (You will be using the removed

screws [1] in the next step.)

Fig. 2-6

• If the Host Machine Is Equipped with a UFR Board

Remove the 2 screws [1], and detach the UFR board

[2]. (You will be using the removed screws [1] in the

next step.)

Hand over the removed UFR board to

the user for storage.

Fig. 2-7

6) Using the removed screws, mount the included open

I/F PCB [1] in the slot [2].

Fig. 2-8

[1]

[2]

[1]

[2]

[1]

[2]

[1]

[2]

F-IM-6262-020e.p65 04/04/20, 17:40Page 4 AdobePageMaker6.5J/Win

–5 –

7) Mount the controller box cover [2] using 12 screws

[1].

Fig. 2-9

8) Fit the 2 cable clamps [1] each to the removed up-

per rear cover and the lower rear cover.

Fig. 2-10a

Fig. 2-10b

[1]

[2]

[1]

9) Mount the upper rear cover using 7 screws [1].

Fig. 2-11

10) Fit the included 2 stepped screws [1] to the lower

rear cover; then, hook the PS print server unit [2]

on the screws.

Fig. 2-12

11) Using the included 4 RS tightening screws [1] to

secure the PS print server unit [2] in place.

Fig. 2-13

[1]

[2]

[1]

[2]

[1]

[2]

F-IM-6262-020e.p65 04/04/20, 17:40Page 5 AdobePageMaker6.5J/Win

–6 –

12) Using the communications cable [1], connect the

open I/F PCB and the PS print server unit [2].

Fig. 2-14

13) Using the cross Ethernet cable [1], connect the

PS print server unit and the host machine.

Fig. 2-15

14) Connect the DDIS cable [1] to the server unit and

the reader unit; then, fix it in place using the 2 wire

saddles [2].

Fig. 2-16

[1]

[2]

[1]

[2]

[1]

15) Bundle the cross Ethernet cable and the commu-

nications cable using the 4 cable clamps [1] of the

host machine.

Fig. 2-17

16) Connect one end of the power cable [1] to the PS

print server unit [2] and the other end to the wall

outlet.

Fig. 2-18

17) Connect the host machine’s power cable (for the

wall outlet).

18) Turn on the host machine and the server unit.

[1]

[2]

F-IM-6262-020e.p65 04/04/20, 17:40Page 6 AdobePageMaker6.5J/Win

–7 –

2.3 Setting Up the Server Unit

1) Press [Print] tab on the host machine’s control panel.

In case [Print] tab is not displayed, press [Print] tab

after press arrow tab.

2) Press [Printer status/Setting].

In response, the machine will automatically bring

up the Setup menu: select at least [Server Setup],

[Network Setup], and [Printer Setup] in order, stor-

ing appropriate data items as you move on.

Fig. 2-19

For instance, as you set up items under [Server Setup],

the machine will bring up a message asking if you

want to store the settings you have made; press [yes]

to store the settings. You will have to make the selec-

tions in specific order to move to subsequent items.

Server Setup:

Name the server, and make other settings.

Fig. 2-20

Network Setup:

Make port, protocol, and service settings.

Fig. 2-21

Printer Setup:

Make the print queue setting.

Fig. 2-22

3) Press [Done] under the Setup menu.

In response, the machine will automatically restart.

3Checking the Operation After

Making Settings

Print out the test page and setup page as follows to

check that the connection between the server unit and

the host machine is correct and the server unit has prop-

erly been set up:

1) Press [Print] tab on the host machine’s control panel.

In case [Print] tab is not displayed, press [Print] tab

after press arrow tab.

2) Press [Printer status/Setting].

3)Make the following selections on the operation

panel: Functions>Print Pages>PS Test Page>and

Configuration.

F-IM-6262-020e.p65 04/04/20, 17:40Page 7 AdobePageMaker6.5J/Win

– 8 –

Module Imprimante Couleur reseau-D1

Procédure d’Installation

Suivre les instructions suivantes pour l’installation de Module Imprimante Couleur reseau-D1.

1 Description

Fig. 1-1

[1] Appareil ...................................................... 1 pc.

[2] Ouverture I/F PCB ...................................... 1 pc.

[3] Câble de connexion ................................... 1 pc.

[4] Câble de puissance (prise de courant) ........ 1 pc.

[5] Câble de connexion Ethernet ...................... 1 pc.

[6] Serre-fil (angulaire) .................................... 4 pc.

[7] Vis à pas progressif ..................................... 2 pc.

[8] Vis de serrage RS (avec rondelle) ............... 4 pc.

[5] [6] [7] [8]

[1] [2] [3] [4]

F-IM-6262-020f.p65 04/04/20, 17:50Page 8 AdobePageMaker6.5J/Win

– 9 –

2 Installation

2.1 Avant de commencer l’installation

• Sélectionner les options suivantes de l’unité

principale puis sélectionner « 3 » :

COPIEUR>OPTION>INTERFACE>

IMAGE-CONT. (De cette manière, l’adresse IP la

plus appropriée sera sélectionnée pour établir la

communication entre l’appareil et l’unité principale).

• S’assurer que l’arrière de l’appareil se situe à une

distance d’au moins 20 cm du mur, comme le décrit

la figure.

Fig. 2-1

2.2 Installation de l’unité principale

Avant de commencer, effectuer les

opérations suivantes dans l’ordre

indiqué :

1. éteindre l’écran de contrôle.

2. éteindre l’appareil.

3. déconnecter le câble de puissance

(de la prise de courant).

Fig. 2-2

1) Déconnecter les 2 connecteurs [2] du câble DDIS.

2) Libérer le câble DDIS [3] du serre-fil [1].

Fig. 2-3

3) Enlever le couvercle arrière supérieur de la machine

[2]. (7 vis [1]).

Fig. 2-4

[1]

[2]

OFF

[3] Disconnect

[1]

[2]

[3]

[2]

[1]

[2]

20 cm min.

(arriere)

Appareil

(avant)

Unite principale

F-IM-6262-020f.p65 04/04/20, 17:50Page 9 AdobePageMaker6.5J/Win

–10 –

4) Oter les12 vis [1], et détacher le couvercle de la boîte

de contrôle [2].

Fig. 2-5

5) Préparer le montage de l’ouverture I/F PCB

• S’il n’existe pas de panneau UFR, ôter les 2 vis [1],

puis détacher la plaque [2]. (Garder les vis ôtées [1]

qui serviront dans un second temps).

Fig. 2-6

• S’il existe un panneau UFR, ôter les 2 vis [1], puis

détacher le panneau UFR [2].

(Garder les vis ôtées [1] qui serviront dans un sec-

ond temps).

Demander à l’utilisateur d’entreposer

le panneau UFR dans un endroit

approprié.

Fig. 2-7

6)En utilisant les vis ôtées auparavant, monter

l’ouverture I/F PCB [2].

Fig. 2-8

[1]

[2]

[1]

[2]

[1]

[2]

[1]

[2]

F-IM-6262-020f.p65 04/04/20, 17:50Page 10 AdobePageMaker6.5J/Win

Andere Handbücher für Color Network Printer Unit-D1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Canon Drucker Handbücher

Canon

Canon i900D Series Konfigurationshandbuch

Canon

Canon TR4700 Series Einrichtungshandbuch

Canon

Canon imagePRESS C7000VP Series Technisches Handbuch

Canon

Canon imagePRGRAF PRO1000 Bedienungsanleitung

Canon

Canon imageCLASS MF8450c Montageanleitung

Canon

Canon FAX-L170 Sicherheitsleitfaden

Canon

Canon Pixma MG3500 Series Bedienungsanleitung

Canon

Canon PIXMA MX527 Series Bedienungsanleitung

Canon

Canon iR1018 Bedienungs- und Wartungshandbuch

Canon

Canon i475D Series Bedienungsanleitung

Canon

Canon imagePROGRAF W8400D Bedienungsanleitung

Canon

Canon LASER SHOT LBP3500 Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE C3330 Series Gebrauchs- und Pflegehandbuch

Canon

Canon CX-G2400 Montageanleitung

Canon

Canon PIXMA TS3355 Einrichtungshandbuch

Canon

Canon PIXMA MP970 Bedienungsanleitung

Canon

Canon LBP3010 Series Bedienungsanleitung

Canon

Canon PIXMA MG6440 Bedienungsanleitung

Canon

Canon MF735C Series Bedienungsanleitung

Canon

Canon imagePROGRAF iPF770 Bedienungsanleitung

Canon

Canon MP980 series Bedienungsanleitung

Canon

Canon LBP5000 Series Bedienungsanleitung

Canon

Canon i-SENSYS MF416dw Service-Handbuch

Canon

Canon iX7000 Series Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung

Ricoh

Ricoh Aficio AP400 Bedienungsanleitung

BIXOLON

BIXOLON SRP-352plusV Bedienungsanleitung

Epson

Epson Stylus Photo PX700W Montageanleitung

Ricoh

Ricoh SP204SF Bedienungsanleitung

Star Micronics

Star Micronics futurePRNT TSP100 Bedienungsanleitung

Epson

Epson TM-TM88V-i Gebrauchs- und Pflegehandbuch