Canon ImagePROGRAF W8400D Bedienungsanleitung

Inhaltsverzeichnis

Andere Canon Drucker Handbücher

Canon

Canon imagePROGRAF SS-41 Bedienungsanleitung

Canon

Canon MAXIFY GX7070 Bedienungsanleitung

Canon

Canon I550 I550 Bedienungsanleitung

Canon

Canon PIXMA G2411 Bedienungsanleitung

Canon

Canon Color Laser Shot LBP-2040 Bedienungsanleitung

Canon

Canon PIXMA PRO-100 Series Bedienungsanleitung

Canon

Canon PIXMA MG5500 Series Bedienungsanleitung

Canon

Canon Color imageCLASS MF8580Cdw Bedienungsanleitung

Canon

Canon SELPHY CP790 Bedienungsanleitung

Canon

Canon iPF5000 - imagePROGRAF Color Inkjet Printer Bedienungsanleitung

Canon

Canon GX6040 Einrichtungshandbuch

Canon

Canon C1538P Bedienungsanleitung

Canon

Canon iR2016 Series Bedienungsanleitung

Canon

Canon PIXMA TS8300 Series Bedienungsanleitung

Canon

Canon MAXIFY GX4000 Series Bedienungsanleitung

Canon

Canon Color Bubble Jet BJC-3000 Series Bedienungsanleitung

Canon

Canon LR1 Bedienungsanleitung

Canon

Canon imageFORMULA DR-M1060 Bedienungsanleitung

Canon

Canon GM2000 Series Einrichtungshandbuch

Canon

Canon TS9500 Series Einrichtungshandbuch

Canon

Canon PIXMA G3010 Series Bedienungsanleitung

Canon

Canon iPF760 series Bedienungsanleitung

Canon

Canon ImageRUNNER C1538iF Bedienungsanleitung

Canon

Canon BJC-S520 Handbuch

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung

Ricoh

Ricoh Aficio AP400 Bedienungsanleitung

BIXOLON

BIXOLON SRP-352plusV Bedienungsanleitung

Epson

Epson Stylus Photo PX700W Montageanleitung

Ricoh

Ricoh SP204SF Bedienungsanleitung

Star Micronics

Star Micronics futurePRNT TSP100 Bedienungsanleitung

Epson

Epson TM-TM88V-i Gebrauchs- und Pflegehandbuch

Moving the Printer

Follow this procedure before moving the printer to protect the internal parts

during moving or shipping.

•If you cannot avoid tilting or standing the printer on end when you are

moving it, please contact the dealer where you purchased the printer

or the nearest service center.

•Before you move the printer, always execute the Move Printer menu

function and follow the directions given by the messages on the

display. The printer may be damaged if you attempt to move it after

disconnecting the power cord before switching off the printer. If you

accidentally disconnect the power cord before switching the printer off,

reattach the power cord, reinstall the ink tanks, then start the

procedure again from Step 1.

•You cannot execute Move Printer once the MTCart Full Soon or

Replace MT-Cart appears. Replace the maintenance cartridge before

executing Move Printer.

•Never tilt the printer while you are moving it. This could spill ink from

the maintenance cartridge and cause ink stains in the surrounding

area.

1 If the printer power is off, press the Power button to switch the printer

on.

After a few moments, Online appears in the display.

2 Press the Online button to display MAIN MENU.

3 Press [ ] or [ ] to select Maintenance, then press [ ].

4 Press [ ] or [ ] to select Move Printer then press [ ].

5 Press [ ] or [ ] to select Yes, then press OK.

Open RightCover is displayed.

6 Open the back right cover.

Remove Ink Tank is displayed on the operation panel.

7 Open the ink tank cover, then remove all the ink tanks.

Place each ink tank in a plastic bag and seal the bag.

Store the removed tanks with the ink supply ports facing up (a).

If the ink tanks are stored with the ink supply ports (a) facing down, ink may

leak out.

8 Lock all of the ink tank covers, then close the right cover.

Please Wait.. appears followed by Ink Draining..while the ink is sucked

from inside the tubes. This process requires about 4 minutes to complete.

The printer switches off automatically once the process is complete.

9 Disconnect the power cord, earth wire and interface cable.

10 Open the top cover, and then open the paper tray.

Do not touch any areas other than as indicated. Doing so

may damage the printer.

11Rewind the roll media back onto the roll and remove the roll holder and

the four overwind prevention stays, and then remove the paper tray.

12 Lower the holder stopper lever, remove the stopper, remove the roll

from the roll holder, then store the roll holder and the holder stopper.

13 Clamp the belt with the belt stopper then use the hex screws to

fasten the belt stopper.

Attach the belt stopper that you removed and stored during the

initial installation.

14 Close the top cover.

15 Remove the accessory pocket.

16 Tape each printer cover in the reverse order of tape removal during

setup.

17 To remove the stacker, apply the attachment procedure in reverse.

18 Apply the printer mounting procedure in reverse to unmount the

printer.

19 Apply the stand assembly procedure in reverse to disassemble and

pack the stand.

20 Reattach the tapes and shipping materials to the roll holder and

printer, then pack them in the original shipping box.

This completes the preparation for moving the printer.