Canon PIXMA MP630 Bedienungsanleitung

Getting Started

Make sure to read this manual before using the machine. Please keep it in hand for future reference.

MP630

Symbols■

The following symbols are used to mark important instructions. Observe these instructions.

Instructions that, if ignored, could result in personal injury or material damage.

Instructions that must be observed for safe operation.

Additional explanations.

Descriptions for operations that take some time to complete.

Microsoft is a registered trademark of Microsoft Corporation.

Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.

Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.

Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.

•

•Model Number: K10326(MP630)

Contents

Check the Included Items

Turn the Power On

Install the Print Head

Install the Ink Tanks

Align the Print Head

Install the Software

Loading Paper

After Installing the Machine

12 3 4 5 6 7

(C)

(B)

(A)

Check the Included Items

(B) 8cm CD-R adapter

Manuals

Setup CD-ROM

(containing the drivers, applications and

on-screen manuals)

Warranty

MP-101 paper

(for Automatic Print Head Alignment)

•

Before turning on the machine, remove all the orange tapes and the protective sheets.•

Open the Paper Output Tray with your hands, and take out the Print Head.

The Print Head is placed inside of the Paper Output Tray (A).

ink tank

Print Head

power cord

A USB cable is necessary to connect the machine with your computer.•

12 3 4 5 6 7

(1)

(2)

(A)

(B)

(C)

(D)

Turn the Power On

Make sure that the Document Cover (C) is closed.•

Do NOT connect the USB cable at this

stage.

•

Plug in the power cord on the left

side at the back of the machine and

connect the other end to the wall

outlet.

Open the Operation Panel (A) then, press the ON button (B)

to turn on the machine.

Use the

{ or }

button (D) on the

Operation Panel to select the language for

the LCD, then press the OK button. The

standby screen is displayed.

The machine may make some operating noises. This is normal

operation.

•

If an unintended language is displayed on

the LCD, press the Back button on the

Operation Panel to return to the Language

selection screen.

•

(A)

(B)

(C)

(D)

Install the Print Head

Close the Document Cover and lift it with the Scanning

Unit (Cover).

• Firmly raise the Print Head Lock Lever until it stops. (The Print

Head Lock Lever may feel heavy.)

•

If the Print Head Holder does not move, make sure that the

machine is turned on.

•

Open the Paper Output Tray (A), then lift the

Scanning Unit (Cover) (B) until it locks into place.

Raise the Print Head Lock Lever (D).

The Scanning Unit (Cover) (B) is fixed automatically.

The Print Head Holder (C) comes out. (This is where you

install the Print Head.)

Do not handle the Print Head

roughly such as applying them

excessive pressure or dropping

them.

•

The Print Head Holder makes a noise as it moves.

This is normal operation.

•

1 2 34 5 6 7

(D)

Remove the Print Head from

the silver package.

Remove and discard the orange

protective cap.

Tilt the Print Head and set it in place. Lower the Print Head Lock

Lever (D) completely.

There may be some transparent or light blue ink on the inside of the bag the Print

Head comes in, or the inside of the protective cap - this has no effect on print quality.

Be careful not to get ink on yourself when handling these items. Be careful not to stain

your hands.

•

Do not knock the Print Head against the sides of the Holder.

Be sure to install it in a well-lit environment.

Pinch the Print Head Lock Lever  rmly and lower it gently.

Once you have installed the Print Head, do not remove it unnecessarily.

•

(1)

(2)

(A)

Install the Ink Tanks

Do not hold the sides of the ink tank; ink may splash.•

Pull the orange tape (1) in the

direction of the arrow to peel off the

protective film and remove the film

(2) completely.

If the Print Head Holder moves to the right,

close and reopen the Scanning Unit (Cover).

Be sure to use the supplied ink tanks.

•

Do not handle the ink tanks roughly such as

applying them excessive pressure or dropping

them.

•

While pressing down with your left thumb, twist off the

orange protective cap (A) located on the bottom of the ink

tank.

5 61 2 3 47

Install all the other ink tanks in the same way.

Wait until the screen above appears (about 6

minutes) and go to the next step.

The machine may make some operating

noises when preparing to print. This is

normal operation.

•

Install all the ink tanks.

Close the Scanning Unit (Cover).

Make sure all the Ink lamp lights red.•

Once you have installed the ink tanks, do not

remove them unnecessarily.

•

If an error message is displayed on the LCD,

make sure that the Print Head and the ink tanks

are correctly installed.

•

Press the PUSH mark on the ink tank until it

clicks into place.

Make sure the Ink lamp lights red.

Install the Ink Tank

Be sure to install it in a well-lit environment.•

Match the labels when installing.•

(A)

(B) (B)

(D)

(C)

Align the Print Head

Align the Print Head for better print results.

This takes about 7 minutes.

Use a sheet of supplied speciality paper

(MP-101) for alignment.

Open the Paper Support

(A) and pull it out.

Load a sheet of supplied speciality paper

(MP-101) in the Rear Tray (D).

Move the Paper Guides

(B) to both edges.

For details, refer to "7 Loading Paper" on page

21.

•

Be sure to use the supplied speciality paper

(MP-101) for Automatic Print Head Alignment.

MP-101 cannot be fed from the Cassette. Load

it in the Rear Tray.

MP-101 has the front and back sides. Load it

with the whiter side facing up.

•

Make sure that the

Output Tray Extension

•

Inhaltsverzeichnis

Andere Canon Drucker Handbücher

Canon

Canon imagePROGRAF iPF8300S Benutzerhandbuch

Canon

Canon PowerShot S200 Bedienungsanleitung

Canon

Canon imageCLASS LBP122dw Bedienungsanleitung

Canon

Canon PIXMA MX392 Einrichtungshandbuch

Canon

Canon MultiPASS L90 Bedienungsanleitung

Canon

Canon PIXMA G7000 Series Bedienungsanleitung

Canon

Canon imagePROGRAF MFP Bedienungsanleitung

Canon

Canon g3000 series Bedienungsanleitung

Canon

Canon PAPER DECK-C1 Bedienungsanleitung

Canon

Canon MG8100 series Bedienungsanleitung

Canon

Canon Colorado 1630 Bedienungsanleitung

Canon

Canon imageGLASS MF455dw Bedienungsanleitung

Canon

Canon imageRUNNER 3245 Series Bedienungsanleitung

Canon

Canon PIXMA TS3365 Bedienungsanleitung

Canon

Canon Pixma E3400 Series Einrichtungshandbuch

Canon

Canon PIXMA MG5600 Series Bedienungsanleitung

Canon

Canon iPF650 - imagePROGRAF Color Inkjet Printer Benutzerhandbuch

Canon

Canon imageCLASS LBP122dw Bedienungsanleitung

Canon

Canon PIXMA mg6150 Bedienungsanleitung

Canon

Canon PIXMA TR7530 Bedienungsanleitung

Canon

Canon PIXMA PRO-100 Series Handbuch

Canon

Canon Laser Shot LBP-1610 Bedienungsanleitung

Canon

Canon ip3000-srm Gebrauchsanweisung

Canon

Canon color imageCLASS LBP7780Cdn Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung

Ricoh

Ricoh Aficio AP400 Bedienungsanleitung

BIXOLON

BIXOLON SRP-352plusV Bedienungsanleitung

Epson

Epson Stylus Photo PX700W Montageanleitung

Ricoh

Ricoh SP204SF Bedienungsanleitung

Star Micronics

Star Micronics futurePRNT TSP100 Bedienungsanleitung

Epson

Epson TM-TM88V-i Gebrauchs- und Pflegehandbuch