Canon 500F - CanoScan LiDE Bedienungsanleitung

English

Quick Start Guide

Please read this guide before operating this scanner. After you finish reading this guide, store it in

a safe place for future reference.

Setup and Scanning

Checking the Package Contents

Installing the Software

Windows

Macintosh

Unlocking

the

Scanning

Unit

Connecting the Scanner

Positioning Items

p.3

p.4

p.5

p.6

p.8

p.9

Using the Scanner Buttons p.15

Scanning Film p.16

Positioning the Scanner p.6

Try Scanning p.12

Be sure to install the software programs before connecting the scanner

to the computer!

Guide to the Manuals

• CanoScan and ScanGear are trademarks of Canon Inc.

• Adobe, Acrobat and Photoshop are trademarks of Adobe Systems Incorporated.

• Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.

• Macintosh, Power Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

• ScanSoft and OmniPage are trademarks of ScanSoft, Inc.

• Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.

In this guide, Windows XP screen shots are used to illustrate explanations common to all operating systems.

Open the Package

Quick Start Guide (this guide)

This guide describes a series of basic processes from opening the package to using the

scanner.

READ THIS GUIDE FIRST!

Scanning Guide (HTML format manual)

Refer to this guide when you have finished setting up the scanner according to the procedures

in the Quick Start Guide. It describes how to utilize the scanner with the bundled software,

and how to solve problems when they occur. You can install this manual onto the hard disk

together with the software programs. When you install it, the Scanning Guide icon will appear

on the desktop. Double-click the icon to view it with a browser program, such as Internet

Explorer. You can also view it by clicking the [?] button in ScanGear CS and CanoScan

Toolbox.

Users’ Guides for Application Programs (PDF format manuals)

• ArcSoft PhotoStudio

• ScanSoft OmniPage SE

Select the “Reference Manual” menu on the CanoScan Setup Utility CD-ROM. To read these

manuals, Adobe Acrobat Reader should be installed on your computer.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Use of a shielded cable with the ferrite core(s) provided with the scanner is necessary to comply with the technical

requirements of the EMC Directive.

Warning

When you use this product, you should pay attention to the following legal issues:

• Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be

prohibited by law and may result in criminal and/or civil liability.

• You may be required under law to obtain authorization from a person possessing copyrights or other legal rights to

the item being scanned.

If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance.

HTML

PDF

Checking the Package Contents

English

Checking the Package Contents

Scanner and Accessories

Documents and Software Programs

• Quick Start Guide (this guide)

• Additional Documents

• CanoScan Setup Utility CD-ROM

ScanGear CS - Scanner Driver

It allows you to scan and load images from the scanner.

CanoScan Toolbox - Scanning Utility Program

It allows you to scan, save, or print images easily as well as create e-mail attachments or PDF files.

ArcSoft PhotoStudio - Image Editing Program

It allows you to load images from the scanner, edit and retouch them, and apply special effects and

enhancements.

ScanSoft OmniPage SE - OCR (Optical Character Recognition) Program

It converts characters scanned from a book, magazine or newspaper into text data for editing or

digital transmission.

*This does not support Windows 98 first Edition.

Adobe Acrobat Reader - PDF File Reader Program

Electronic manuals for the above software programs (HTML and PDF manuals)

Approximately 210 MB/165 MB (for Windows/Macintosh) of hard disk space on your

computer is required to install all the programs. Additional free hard disk space is required to

operate the programs.

CanoScan LiDE 500F USB Interface Cable

Film Guide

(for 35 mm film strip)

Film Adapter Unit

Installing the Software (Windows)

1Turn the computer on.

2Place the CanoScan Setup Utility CD-ROM in the

drive.

After you select your language, the CanoScan Setup Utility

main menu will display.

3Click [Install].

Read the "Notes on Software Installation" and click [Next].

The [Install] window will display.

4Click [Install].

Read the Software User License Agreement. Click [Yes] if you

accept the terms.

You will install five software programs and the Scanning Guide

(HTML format manual).

5Follow the on-screen message prompts and click

buttons such as [Install], [Next] or [Yes] to continue

the installation.

6When the "Installation Results" displays, click [OK].

The registration dialog will display. Follow the on-screen

message prompts to register this product.

7When "Installation completed successfully" displays,

click [Restart].

The computer will restart.

8After Windows restarts, remove the CD-ROM from

the drive and store it in a safe place.

Continue to page 6.

• If you are running Windows XP or Windows 2000 Professional with multiple user

accounts, you should log on with an administrator user name when installing or

uninstalling software programs.

If the "Found New Hardware Wizard" or "Add New Hardware Wizard" appears, click [Cancel].

• In a few cases, your operating system may

require a restart. Follow the on-screen

messages to restart and resume installation.

Windows

Installing the Software (Macintosh)

English

Installing the Software (Macintosh)

1Turn the computer on.

logged in using added administrator accounts.

2Place the CanoScan Setup Utility CD-ROM in the

drive.

3Double-click the CD-ROM icon.

4Double-click the [SetUp] icon.

After you select your language, the CanoScan Setup Utility

main menu will display.

5Click [Install].

Read the "Notes on Software Installation" and click [Next].

The [Install] window will display.

6Click [Install].

Read the Software User License Agreement. Click [Yes] if you

accept the terms.

You will install five software programs and the Scanning Guide

(HTML format manual).

7Follow the on-screen message prompts and click

buttons such as [Install], [Next] or [Yes] to continue

the installation.

If a verification dialog appears, type the administrator's name

and password.

8When the "Installation Results" displays, click [OK].

The registration dialog will display. Follow the on-screen

message prompts to register this product.

9When "Installation completed successfully" displays,

click [Restart].

The computer will restart.

10After restarting, remove the CD-ROM from the

drive and store it in a safe place.

Macintosh

Unlocking the Scanning Unit/Positioning the Scanner

Unlocking the Scanning Unit

1Peel the seals off the scanner.

2Slide the lock switch toward the unlock mark ( ).

Positioning the Scanner

This scanner may be used in a variety of positions.

Landscape Position (a)

This position is to set the scanner so that the document cover

opens from the front to the back. It is possible to scan thick

or large items, and also films can be scanned.

Portrait Position (b)

This position is to set the scanner so that the document cover

opens from the left to the right. It is possible to scan thick or

large items, and also films can be scanned.

Upright Position (on the Stand) (c)

This is the most space-saving position to set the scanner. It is

possible to scan thin items, but films cannot be scanned.

• When carrying or transporting the scanner, always lock the scanning unit by sliding the

lock switch toward the lock mark ( ).

Unlock Mark

Lock Switch

(a)

(b)

(c)

Positioning the Scanner

English

Setting the Stand

1Turn the scanner upside down.

2Lift the stand on the scanner back in the

direction of arrow cand then arrow d.

3Place the stand's end around the front

side of the scanner (arrow e).

4Push to the direction of arrow funtil

the Smarks on the scanner and the

stand align.

5Slowly turn the scanner over and set it

upright on the stand in position.

• The scanner weighs approximately 2.0 kg. Be careful not to drop.

• Before setting the stand, make sure that there isn't a space between the document

cover and the surface of the document glass (p. 11, Step 3).

Connecting the Scanner

1Connect the scanner to the computer with the supplied USB interface cable.

There are cable holders on the side of the scanner to hold the USB cable. Use the holders to organize the

cable.

Hold the cable with the holders before setting up the stand in the upright position.

• Only use the USB interface cable provided with the scanner. Use of other cables may

lead to a malfunction.

• When the scanner is connected to the USB 1.1 port on Windows XP and "HI-SPEED USB

Device Plugged into non-HI-SPEED USB Hub" message appears, ignore the message. The

scanner operates in this condition without problems.

• The scanner does not have a power switch. The power is activated as soon as the

computer is turned on.

USB Interface Cable

Wide Flat Connector

Small Square Connector

USB Connector

Cable Holders

Positioning Items

English

Positioning Items

Items can be scanned in three different ways: scanning standard items, scanning oversize items, and

scanning on the stand. The following procedures explain how to position items for each method.

Scanning Standard Items

Follow the procedure below to scan photos and other items smaller than the document glass.

1Open the document cover.

The document cover will open as far as the position

shown to the right and stop.

2Place an item on the document glass and

adjust its top corner with the alignment

mark.

3Gently close the document cover.

• When opening the document cover, support it with your hand until it stops.

• Do not place items that weigh 2.0 kg or more on the scanner. In addition, do not

press heavily on the document cover or the item while it is on the scanner.

• You can position items, such as magazines and books, up

to approximately 24 mm thick on the scanner.

Alignment Mark

Top

Bottom

Positioning Items

Scanning Oversize Items

Follow the procedure below to scan magazines, books and other items larger than the document glass.

1As shown in the right figure, hold the

antislip grip on the center of the document

cover and open it partway (arrow c).

2When the document cover is open to

approximately 60°, lightly pull it straight up

a short distance (arrow d).

3Keep light upward tension on it as you

slowly swing the cover open the rest of the

way (arrow e).

4Position the item on the document glass.

• Do not force it if it does not open

easily as shown on the right. Repeat

the procedure from Step 2.

• Cover the scanner with a black cloth if the external light enters around the scanned item.

Alignment Mark

Top

Bottom

Antislip Grip

Andere Handbücher für 500F - CanoScan LiDE

Inhaltsverzeichnis

Andere Canon Scanner Handbücher

Canon

Canon MS-300II Bedienungsanleitung

Canon

Canon 8400F - CanoScan Flatbed Scanner Bedienungsanleitung

Canon

Canon ImageFormula DR-9080C Bedienungsanleitung

Canon

Canon 0433B002 Bedienungsanleitung

Canon

Canon M181011 Bedienungsanleitung

Canon

Canon CanoScan N340P Referenzhandbuch

Canon

Canon imageFORMULA DR-M160 Bedienungsanleitung

Canon

Canon imageFORMULA P-150 Portable Scanner Bedienungsanleitung

Canon

Canon DR 7090C - imageFORMULA - Document Scanner Bedienungsanleitung

Canon

Canon ImageFormula DR-9080C Bedienungsanleitung

Canon

Canon DR 5010C - imageFORMULA - Document Scanner Installations- und Betriebshandbuch

Canon

Canon DR-6080 Bedienungsanleitung

Canon

Canon DR-4010C - imageFORMULA - Document Scanner Bedienungsanleitung

Canon

Canon DR-X10C - imageFORMULA - Document Scanner Bedienungsanleitung

Canon

Canon DR 2010C - imageFORMULA - Document Scanner Bedienungsanleitung

Canon

Canon imageFORMULA P-150 Portable Scanner Bedienungsanleitung

Canon

Canon CanoScan D646U Bedienungsanleitung

Canon

Canon imageFORMULA DR-M160II Bedienungsanleitung

Canon

Canon ScanFront 330 Bedienungsanleitung

Canon

Canon imageFORMULA DR-3080CII Bedienungsanleitung

Canon

Canon imageFORMULA CR-190i Bedienungsanleitung

Canon

Canon 3622B002 Bedienungsanleitung

Canon

Canon imageFORMULA DR-M160 Bedienungsanleitung

Canon

Canon CanoScan LiDE 120 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung