Canon D1250U2F - CanoScan USB Flatbed Scanner Bedienungsanleitung

Contents Index Next Page

User’s Guide

for Windows

ScanGear Toolbox 3.1

English

wwww

Contents Index Previous View Next View Previous Page Next Page

Warning

When you use this product, you should pay attention to the following legal issues.

•Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates,

may be prohibited by law and may result in criminal and/or civil liability.

•You may be required under law to obtain authorization from a person possessing copyrights or other legal

rights to the item being scanned.

If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in

advance.

1. No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any

language in any form, by any means, without the prior written permission of Canon Inc.

2. Canon Inc. reserves the right to change the specifications of the hardware and software described herein at any time

without prior notice.

3. Notwithstanding the considerable care taken in preparing this guide, please note that Canon Inc. does not accept

liability for any results arising from the operation of the equipment or software mentioned herein.

4. Portions of this guide are reproduced herein with the permission of Adobe Systems Incorporated.

•ScanGear is a trademark of Canon Inc.

•Adobe and Photoshop are trademarks of Adobe Systems Incorporated.

•Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or

other countries.

•Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.

* Screen shots are taken with Windows XP in this guide.

I-0E-067A ©CANON INC. 2001

wwww

Contents Index Previous View Next View Previous Page Next Page

wwww

Contents Index Previous View Next View Previous Page Next Page

Chapter 1

Toolbox Basics

Toolbox Buttons (1/2)

This topic introduces the buttons contained in the Toolbox’s main

window. See

Chapter 2 “Using the Toolbox” for the

instructions to adjust each button’s settings.

Copy

After scanning, it prints the

image on a printer.

Mail

After scanning, it starts

a linked mail program

and creates a new

message with the image

file attached.

OCR

After scanning a document,

it starts a linked OCR

program (an image-to-text

converter) and opens the

image file. If you installed

the OCR program from the

CanoScan Setup CD-ROM, it

will already be linked.

Save

After scanning, it saves

the image file to disk.

Photo

After scanning, it starts a linked

program and transfers the

image to it. See jthe next

page for details.

Scan-1 and Scan-2

After scanning, it starts a

linked program and transfers

the image to it. See jthe

next page for details.

Click here to minimize

the window.

Click here and click an

object to open its help

topic.

Click here to close the

Toolbox.

Settings

The Settings button can

be used to set the

functions performed by

the scanner buttons on

the scanner’s front panel.

It can also be used to

select the scanner if more

than one is connected to

your computer.

Ajsymbol in the text marks a link to

a page related to that topic. Click the

jto jump to that page.

Click this button to go

forward 1 page.

Click this button to return to a

linked page to which you jumped

1 step previously. Use it to view a

link again.

Click this button to return to the

page displayed 1 step previously. Use

it to return after jumping via a link.

Click this button to go

back 1 page.

How to Use the Buttons in this Guide

Click this button to jump

to the Index.

Click this button to jump

to the Contents page.

wwww

Contents Index Previous View Next View Previous Page Next Page

How to Use the Buttons in this Guide ............................ 3

Contents.......................................................................... 4

Chapter 1 Toolbox Basics

What is the Toolbox? ...................................................... 6

Installing the Program .................................................... 7

System Requirements............................................................ 7

Installing the Toolbox ...........................................................7

Starting/Closing the Toolbox .......................................... 8

Starting the Toolbox .............................................................8

Closing the Toolbox .............................................................. 9

Toolbox Buttons ............................................................ 10

Chapter 2 Using the Toolbox

Clicking a Button to Start an Action ............................. 12

Settings Common to the Dialogs .................................. 13

Scanner Settings - Image type ............................................ 14

Scanner Settings - Image quality........................................ 15

Scanner Settings - Paper size .............................................. 15

Scanner Settings - Use the scanner driver to make

advanced settings................................. 16

Save scanned image to - File name .................................... 17

Save scanned image to - Save as type................................ 17

Save scanned image to - Folder ......................................... 17

Save scanned image to - Put pictures in a subfolder

using today’s date .................... 18

Link scanned images to ...................................................... 18

Scan Button ......................................................................... 18

Copy Settings Dialog ..................................................... 19

Scanner settings - Image quality ........................................ 19

Scanner settings - Brightness.............................................. 20

Scanner settings - Scale....................................................... 20

Printer settings .................................................................... 21

Mail Settings Dialog ...................................................... 22

Scanner settings - Upper limit of attached file ................. 22

Scanner settings - Image quality ........................................ 23

Link scanned images to ...................................................... 23

OCR Settings Dialog ...................................................... 24

Scanner settings - Image type ............................................ 24

Scanner settings - Image quality ........................................ 24

Save Settings Dialog ..................................................... 25

Scanner settings - Image quality ........................................ 25

Scan-1 and Scan-2 Settings Dialog ................................ 26

Scanner settings - Image quality ........................................ 26

Photo Settings Dialog ................................................... 27

Scanner settings - Original ................................................. 27

Scanner settings - Image quality ........................................ 28

Scanner settings - Paper size .............................................. 28

Chapter 3 Using the Scanner Buttons

Using the Scanner Buttons............................................ 29

Confirming Scanner Button Settings ................................. 29

What Happens when a Scanner Button is Pressed? .......... 30

What Scan Settings Are Used? ........................................... 31

Changing Settings after a Button Has Been Pressed ........ 31

Changing the Functions of Scanner Buttons .................. 32

Contents (1/2)

wwww

Contents Index Previous View Next View Previous Page Next Page

Contents (2/2)

Chapter 4 Useful Hints

Selecting a Scanner ....................................................... 34

Linking to Other Application Programs ........................ 35

Appendices

File Formats................................................................... 37

Uninstalling the Toolbox............................................... 38

List of Default Settings.................................................. 39

Index ............................................................................. 40

wwww

Contents Index Previous View Next View Previous Page Next Page

Chapter 1

Toolbox Basics What is the Toolbox?

ScanGear Toolbox 3.1 (the Toolbox) is a program that makes your scanner faster and easier to use.

Without the Toolbox, for example, you would have to perform each of the following steps if you wished to scan and display a

page from a magazine in an image editing application program.

You can perform the same functions with the following steps using the Toolbox.

As you can see, the process is simplified with the Toolbox.

You can simplify it even further by using a button on the scanner.

As this demonstrates, the Toolbox makes it considerably easier and faster to use your scanner.

View the scanned

image in the

application

program.

Start the

application

program.

Start the scanner

driver. Set the detailed

scan settings. Initiate the scan. Close the scanner

driver.

Start the

Toolbox. Select a function

button in the

main window.

Set a few simple

settings in the

settings dialog.

Initiate the scan.

View the scanned

image in the

application

program.

Press the SCAN

button on the

scanner.

(The Toolbox will start and automatically perform the entire process)

View the scanned

image in the

application

program.

wwww

Contents Index Previous View Next View Previous Page Next Page

Chapter 1

Toolbox Basics Installing the Program

This topic explains how to install the Toolbox program.

System Requirements

The following minimum requirements must be met to

install the program.

Supported System Software:

Windows 98

Windows 2000 Professional

Windows Millennium Edition

Windows XP Professional

Windows XP Home Edition

Free Hard Disk Space: Approximately 10 MB

(before installation)

Display: 800 x 600 pixels

Medium (16 bit)/High Color

(16 bit) or higher

Installing the Toolbox

Use the CanoScan Setup CD-ROM that came with your

scanner to install the Toolbox program. Please see the

separate Quick Start Guide for installation instructions.

Important

•With Windows XP (Professional, Home Edition) and

Windows 2000 Professional, you should log on with a

user name set to an administrator when you install

software programs.

Note

•See the j“Uninstalling the Toolbox” topic in the

Appendices for instructions for removing the installed

program from your computer.

•Unless there is a need to specify one operating system,

the term Windows is used in this guide to refer

collectively to Windows 98, Windows 2000 Professional,

Windows Millennium Edition (Windows Me), Windows

XP Professional and Windows XP Home Edition.

wwww

Contents Index Previous View Next View Previous Page Next Page

Chapter 1

Toolbox Basics Starting/Closing the Toolbox (1/2)

This topic explains how to start and close the Toolbox.

Important

•Before starting the Toolbox program, confirm that the

scanner driver ScanGear CS-U has been installed and the

scanner correctly connected.

Starting the Toolbox

Use the following procedures to start the Toolbox.

Click the Windows [start] menu and select [All Programs]

or [Programs], followed by [Canon ScanGear Toolbox 3.1]

and [ScanGear Toolbox 3.1].

This will start the Toolbox and display its main window,

which will appear similar to the example below.

Note

•Please see jChapter 3 “Using the Scanner Buttons” for

instructions for using Toolbox with the buttons on the

scanner.

wwww

Contents Index Previous View Next View Previous Page Next Page

Chapter 1

Toolbox Basics

Closing the Toolbox

To close the Toolbox, click the close box on the main

window.

To close the program when you have opened a settings

dialog, click the dialog’s [Cancel] button or close box,

and then click the main window’s close box.

Starting/Closing the Toolbox (2/2)

wwww

Contents Index Previous View Next View Previous Page Next Page

Chapter 1

Toolbox Basics Toolbox Buttons (1/2)

This topic introduces the buttons contained in the Toolbox’s main

window. See

Chapter 2 “Using the Toolbox” for the

instructions to adjust each button’s settings.

Copy

After scanning, it prints the

image on a printer.

Mail

After scanning, it starts

a linked mail program

and creates a new

message with the image

file attached.

OCR

After scanning a document,

it starts a linked OCR

program (an image-to-text

converter) and opens the

image file. If you installed

the OCR program from the

CanoScan Setup CD-ROM, it

will already be linked.

Save

After scanning, it saves

the image file to disk.

Photo

After scanning, it starts a linked

program and transfers the

image to it. See jthe next

page for details.

Scan-1 and Scan-2

After scanning, it starts a

linked program and transfers

the image to it. See jthe

next page for details.

Click here to minimize

the window.

Click here and click an

object to open its help

topic.

Click here to close the

Toolbox.

Settings

The Settings button can

be used to set the

functions performed by

the scanner buttons on

the scanner’s front panel.

It can also be used to

select the scanner if more

than one is connected to

your computer.

Andere Handbücher für D1250U2F - CanoScan USB Flatbed Scanner

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Software Handbücher

Canon

Canon EOS 5D Mark II Bedienungsanleitung

Canon

Canon Elura 60 - Elura 60 MiniDV Camcorder Bedienungsanleitung

Canon

Canon CanoScan D646U Bedienungsanleitung

Canon

Canon 2689B001 - DC 330 Camcorder Bedienungsanleitung

Canon

Canon EOS-1D Mark II Digial Bedienungsanleitung

Canon

Canon FAXPHONE L170 Kurzanleitung

Canon

Canon Powershot A650 IS Sicherheitsleitfaden

Canon

Canon EOS Rebel T3 18-55mm IS II Kit Bedienungsanleitung

Canon

Canon 0744B001 - DC 10 Camcorder Bedienungsanleitung

Canon

Canon DV-PC Montageanleitung

Canon

Canon Cloud Portal Bedienungsanleitung

Canon

Canon VIXIA HF M32 Bedienungsanleitung

Canon

Canon CANOSCAN N1220U Bedienungsanleitung

Canon

Canon VIXIA HF11 Bedienungsanleitung

Canon

Canon Powershot 500 Bedienungsanleitung

Canon

Canon WEBVIEW LIVESCOPE 3.2 Bedienungsanleitung

Canon

Canon 2055B001 - DC 50 Camcorder Bedienungsanleitung

Canon

Canon 1000D - EOS Rebel XS Transcend 8GB Memory... Bedienungsanleitung

Canon

Canon EOS 10D Digital Bedienungsanleitung

Canon

Canon EOS 20Da Bedienungsanleitung

Canon

Canon 40D - EOS 40D DSLR Sicherheitsleitfaden

Canon

Canon ZR200 Montageanleitung

Canon

Canon CR-DGi Bedienungsanleitung

Canon

Canon ELURA 100 - Camcorder - 1.3 MP Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Novell

Novell SP2 - S Bedienungsanleitung

Lexmark

Lexmark Apps Service-Handbuch