Caraudio-Systems USB-C25 Bedienungsanleitung
Version 31.08.2011 USB-C25
usbLOGiC USB-AV-Player
USB-C25
compatible with navigation systems
Mercedes Benz Comand 2.5
Product features
• USB-port for media up to 2 TB (2000GB)
• supports FAT32 and NTFS formatted media
• multi partition capable
• compatible with MP3, AVI, VOB, MOV, RMVB, JPG and many more
• last position memory
• integrated into and controllable by vehicle infotainment
• AV-input with IR-control channel
• control of after-market devices by OEM buttons, e.g. DVD-player, USB/iPod devices, …
• after-market rear-view camera input
• automatic switching to rear-view camera input (only from usbLOGiC mode)
• rear-view camera power (+12V max. 1A)
• rear-seat-entertainment AV-output
• optional remote control for full USB functions/rear-seat-entertainment
• power on remote out trigger signal (+12V max. 1A) to switch on connected devices
• video-in-motion
Version 31.08.2011 USB-C25
Page1
Contents
1. Prior to Installation
1.1. Delivery contents
1.2. Check compatibility of vehicle and accessories
1.3. Setting the dip switches of the USB-box USBC-M500
1.3.1. Automatic switching to rear-view camera
1.3.2. Deactivating usbLOGiC AV-input
2. Connection schema
3. Installation
3.1. Connections to the Comand
3.2. Interconnecting USB-box and harnesses
3.3. USB and optional IR-remote control set
3.4. Connecting peripheral devices
3.4.1. AV-source
3.4.2. Installing AV-source’s IR-sensor additionally
3.4.3. After-market rear-view camera
3.4.4. After-market rear-seat-entertainment
4. Operation
4.1. Activation of the video-in-motion function
4.2. Selecting the usbLOGiC as current AV-source
4.3. Switching between internal USB and AV-input
4.4. Assigning device control for connected AV-source
4.5. Button assignment table
4.6. Picture settings
4.7. Audio settings
5. Specifications
6. Connections (USB-box)
7. Technical support
Appendix A –Device control table
Appendix B –USB function manual
Version 31.08.2011 USB-C25
Page2
Legal Information
By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. This product should only
be used while standing or to display fixed menus or rear-view-camera video when the
vehicle is moving, for example the MP3 menu for DVD upgrades.
Changes/updates of the vehicle’s software can cause malfunctions of the interface. We offer
free software-updates for our interfaces for one year after purchase. To receive a free
update, the interface must be sent in at own cost. Labor cost for and other expenses
involved with the software-updates will not be refunded.
1. Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The
place of installation must be free of moisture and away from heat sources.
1.1. Delivery contents
If remote function for a peripheral device shall be used, additionally an IR-remote cable and
Y-adapter are needed, see chapter AV-source.
Take down the SW-version and HW-version of the interface boxes, and store this
manual for support purposes.
USB-box
USBC-M500
HW_____ SW_____
Harness
C2C-MB25
Harness
C3C-AV
USB-installation socket USBC-EXT
Version 31.08.2011 USB-C25
Page3
Dip switches
of USB-box
Dip switches
of USB-box
1.2. Check compatibility of vehicle and accessories
1.3. Setting the dip switches of the USB-box USBC-M500
The default dip switch settings of the USB-box
need to be changed ONLY if an after-market
rear-view camera shall be connected or if the AV
of the usbLOGiC shall be deactivated. The dip
switches are located inside the USB-box.
For changes it is necessary to open the box.
Default settings are:
dip1 = ON, dip2 = OFF, dip3 = ON
1.3.1. Automatic switching to rear-view camera
If an after-market rear-view camera shall be connected, in order for
the usbLOGiC to automatically switch to its camera input on engaged
reverse gear,
set dip2 = ON (up).
Note: With after-market cameras, automatic switching works only from
usbLOGiC mode.
1.3.2. Deactivating usbLOGiC AV-input
If no peripheral AV-source shall be connected to the usbLOGiC, we
recommend to disable the AV-input, to avoid customers switching by
mistake to black/no picture of the AV-input. In order to disable the
AV-input of the usbLOGiC,
set dip1 = OFF (down).
Requirements
Vehicle CL-class (C215) til 08/2002, S-class (W220) til 08/2002
Navigation Comand 2.5
Limitations
Factory-TV-tuner Must NOT be installed.
After-market rear-view cam Automatic switching to camera only works from usbLOGiC mode
USB-port Only for media which work with power supply by ONE single USB
connector
Version 31.08.2011 USB-C25
Page4
2. Connection schema
3. Installation
Switch off ignition and disconnect the vehicle’s battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Version 31.08.2011 USB-C25
Page5
17
18
A
B
8
4
3.1. Connections to the Comand
Place of installation is behind the Comand. Remove the head-unit from the dash-board.
If female 8pin C1 connector of factory harness exists, transfer pins from female 8pin
C1 connector of C2C-MB25 to corresponding slots of female 8pin C1 connector of
factory harness. If slots are occupied remove and isolate factory wires (take notes
before removing).
Otherwise use female 8pin C1 connector of C2C-MB25 instead of factory connector.
Connect yellow loose wire (CAN high) C2C-MB25
to pin 18 of chamber C2. Connect loose blue wire
(CAN low) of C2C-MB25 to pin 17 of chamber C2.
Connect loose red wire of C2C-MB25 to pin 4
of chamber A (+12V battery power).
Connect loose black wire of C2C-MB25 to pin 8
of chamber A (ground).
Plug female 8pin C1 connector of factory harness
(if not existing, of C2C-MB25) into C1 slot of
Comand’s male system connector.
Plug male 5pin DIN connector of harness C2C-MB25 into female 5pin DIN socket on
the Comand’s rear.
Version 31.08.2011 USB-C25
Page6
3.2. Interconnecting USB-box and harnesses
Plug harness C3C-AV into 6pin Molex of USB-box USBC-M500.
Plug harness C2C-MB25 into 14pin Molex of USB-box USBC-M500.
Plug female 18pin AMP-connector of C2C-MB25 into male 18pin AMP-socket of
USB-box USBC-M500.
Version 31.08.2011 USB-C25
Page7
3.3. USB and optional IR-remote control set
Connect USB-connector of USB-installation socket USBC-EXT to USB-socket of
USB-box USBC-M500 and install the USBC-EXT socket in a well accessible location,
e.g. the glove-box. Make sure there is enough space to load USB-media.
Installation socket for the connection of USB-media.
The USB-IRSET consists of the external C3C-SENSOR IR-sensor and the USBC-RC IR-
remote control and can be used to control the usbLOGiC’s internal USB functions
additionally to the control through the navigations buttons. Connect the C3C-
SENSOR to the female black/red/blue 3pin AMP connector of harness C3C-AVIR and
locate the sensor in an accessible place.
3.4. Connecting peripheral devices
It is possible to connect an after-market AV-source, an after-market rear-view camera and
rear-seat-entertainment to the usbLOGiC.
Before final installation of the peripheral devices, we recommend to test-run the usbLOGiC
functions to detect incompatibility of vehicle, navigation, factory accessories or peripheral
devices as soon as possible.
Version 31.08.2011 USB-C25
Page8
3.4.1. AV-source
The usbLOGiC has the possibility to connect and remotely control by navigation buttons a
pre-programmed device. The device list in the device control table (appendix A) shows the
pre-programmed remote channels and the related IR-remote cables STA-xxx which must be
ordered separately for the control of the device.
Using the respective STA-xxx IR-control cable, interconnect the yellow female 3pin
AMP connector of harness C2C-MB25 and the IR-port of the AV-source.
Using an RCA-cable, interconnect the female RCA-port AV-IN of the USB-box
USBC-M500 with the AV-output of the AV-source.
The pink ACC-output wire (+12V max 1A) of harness C2C-MB25 can be connected to
the ACC-input wires of the connected device to switch it on. It carries +12V when the
head-unit is running.
3.4.2. Installing AV-source’s IR-sensor additionally
Additionally to the control via OEM navigation, it is possible to install the original IR-sensor
of a connected device. By using the respective Y-adapter (e.g. STA-Y35MM or STA-RJ12) for
the IR-Port of the connected device, the controls of navigation AND device’s IR-sensor can be
connected and used simultaneously. Installation of the IR-sensor is recommended as the
controls via navigation are limited, and not all functions may be covered.
Version 31.08.2011 USB-C25
Page9
3.4.3. After-market rear-view camera
Connect the video RCA of the after-market rear-view camera to female
RCA connector R-CAM IN of USB-box USBC-M500.
Connect the green wire of C2C-MB25 to the camera power supply (+12V max. 1A)
The green wire is high (+12V) when reverse gear is engaged.
Note: Automatic switching to camera only works from usbLOGiC mode.
3.4.4. After-market rear-seat-entertainment
Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector
VIDEO OUT of USB-box USBC-M500.
Note: As the output is a full output, not shared with the video signal for the
navigation system, splitting the video with an RCA Y-cable might give a good enough
picture for two rear-seat-entertainment monitors. If not, or if connecting more than
two monitors, use a video splitter.
Inhaltsverzeichnis
Andere Caraudio-Systems Autozubehör Handbücher
Caraudio-Systems
Caraudio-Systems c.LOGiC lite C1-C25 Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems r.LiNK RL-FD79-TF Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems blueLOGiC BT-AU02 Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems TF-LR17 Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems c.LOGiC C2-E65-TV Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems RL-LR17-TF Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems TF-MMI Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems CXR-CAN Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems CI-TF-NTG5 Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems MD-VW01 Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems CI-RL4-MIB101 Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems r.LiNK RL-PCM3-2-TF Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems c.LOGiC C4-LR12-NC Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems TF-U501 Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems c.LOGiC C1-PHAETON Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems r.LiNK-Interface Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems TF-UCON52 Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems r.LiNK RL-PCM3-TF Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems TV-Free TF-E65 Bedienungsanleitung
Caraudio-Systems
Caraudio-Systems c.LOGiC C2-MMI2G Series Bedienungsanleitung
