CasaCam VS2004 Bedienungsanleitung



CasaCamVS2004

8ChannelWirelessNVRwith41296pCameras



UserManual



www.casacamusa.com

Fortechsupport,contactusat[email protected]



2



TableofContents

1.SAFETYINSTRUCTION..........................................................................................................................................3

2.WHAT’SINTHEBOX?...........................................................................................................................................3

3.ATAGLANCE........................................................................................................................................................4

3.1NVR(receiver)................................................................................................................................................4

3.2CAMERA.........................................................................................................................................................5

3.2.1NightVisionCamera...........................................................................................................................5

4.SETUPTHEHARDWARE.......................................................................................................................................6

4.1NVR................................................................................................................................................................6

4.2Camera...........................................................................................................................................................6

4.3SettheAntennaExtension.............................................................................................................................7

5.SYSTEMOPERATION.............................................................................................................................................7

5.1SetupWizard..................................................................................................................................................7

5.2NVRSCREEN.................................................................................................................................................10

5.2.1LiveViewScreen...............................................................................................................................11

5.2.2LogIn&Password.............................................................................................................................12

5.2.3MainMenuToolbar...................................................................................................................13

6.FUNCTIONS........................................................................................................................................................13

7.1Camera&Display.........................................................................................................................................14

7.2Record..........................................................................................................................................................16

7.3Playback.......................................................................................................................................................17

7.4LightSetting.................................................................................................................................................19

7.5Motion&Alarm...........................................................................................................................................20

7.6HardDrive....................................................................................................................................................21

7.7System..........................................................................................................................................................21

7.8Advanced.....................................................................................................................................................22

7.REMOTEFROMAPP...........................................................................................................................................22

8.1GettheApp..................................................................................................................................................22

8.2APPRemote.................................................................................................................................................23

8.2.1Addcamera.......................................................................................................................................23

8.2.2OperatingtheApp............................................................................................................................24

8.SPECIFICATIONS.................................................................................................................................................26

9.TROUBLESHOOTING..........................................................................................................................................28

10.FCCREGULATIONS.............................................................................................................................................29

Please read carefully before using this equipment.

3



1.SAFETYINSTRUCTION

①Install the NVR in sufficiently ventilated spaces to prevent plug vents.

②Install the NVR on a flat wall or other flat surfaces, avoid mounting in a severe vibration environment.

③Only use the power adapter plug contained in the material supplied since other power adapter plugs

could damage the devices. Ensure access to the power adapter plug is not obstructed by

furniture or such. Pay attention that the plug and cable are in perfect condition. Kinked or worn cable

represents the risk of a fatal accident!

④Unauthorized modification or reconstruction is not permitted. Under no circumstances open the

devices or complete any repair work yourself. Observe all local directives and regulations.

2. WHAT’S IN THE BOX?

WirelessNVR

Mouse

Adapters

(4pcsforcamera,1pcforNVR)



EthernetCable

UserManual&

QuickStartGuide

ScrewsandAnchors

kit1TBHDD

(pre‐installed)

AntennaExtension

(WithMagneticStandBase)

VC2000

NightVisionCamera*4pcs

4



3. ATAGLANCE

3.1 NVR (receiver)

Item What it is What it does

1 Power Indicator The indicator LED will turn on when NVR is powered

2 HDD Indicator The indicator LED will turn on when HDD is installed

3 Power Indicator The indicator LED will turn on when NVR is powered

4 NVR Antenna Transmitting wireless signal with wireless camera.

5 AV output Connect the video cable

6 HDMI port Connect the HDMI cable

7 RJ-45 port Connect the Ethernet cable to get access to enable

Smartphone/tablet connectivity.

8 USB port Connect the mouse to control the NVR or connect to USB storage

for back up.

9 Power port DC 12V power port. Connect to a local power outlet using te

included 12V power adapter.

5



3.2 CAMERA

3.2.1 Night Vision Camera



Item What it is What it does

1 Microphone Captures the sound on camera side and transmits the sound from

camera to monitor.

2 Lens Catches the video in front of the lens and transmits video from

camera to Monitor.

3 Working Indicator

Indicates the working status of camera. (Green LED)

Flashing rapidly——Ready to pair/ pairing mode

Solid green——Paired / working

4 Light sensor Sensing light and give order to the IR cut to switch between

daytime and night vision mode.

5 PIR sensor Detects motion in front of the lens and emits detection signal to

transmitter.

6 Speaker Produces the sound transmitted from the monitor.

7 IR LED Infrared LEDs provide viewing in no/low light conditions.

8 Bracket Use the bracket to mount the camera on a wall or other flat

surfaces.

9 Camera antenna Receives & Sends signals to or from the Monitor.

10 Reset button

The reset button is located on the back of the camera. Press and

hold the reset button (until the indicator LED flashes) to reset the

camera.

6



4.SETUPTHEHARDWARE

4.1 NVR

①Place the stand on the back of the NVR on a table or install to other flat surfaces, position the

antenna.

②Connect the mousetothemouseportonthebackoftheNVR.

③Connect an AC adaptor to the power input on the back of the NVR. Connect the other end of the

adapter to a standard indoor power outlet. The NVR will power on automatically and start initialize,

Please wait until initialization is completed.

④The screen of NVR remains dark until the cameras are powered on.

4.2 Camera

General

The camera included with your monitor is weatherproof and have an IP66 rating. Water can be sprayed

on them and they will still work; however, the cameras cannot be submerged.

Although the cameras can be exposed directly to the rain, it is recommended that, if they are used

outdoors, they should be mounted under some type of cover like a patio overhang or eave. As rainwater

drops start to dry on the camera glass, it can create spots that will reflect the light from the infrared LEDs

used for night vision, thus causing lower quality video.

Also, as dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the

infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth.

Placement Considerations

Consider the following when placing cameras:

• The clearest line-of-sight between the camera and NVR is best.

- Walls, especially brick and concrete, shorten the transmission distance.

- Placement next to windows allows better transmission.

• Optimized motion detection range is 6~30 feet for the camera. The farther away an object is, the less

accurate the motion detection.

• Avoid having a direct light source in the view of the camera, including street lights, ceiling or floor lamps,

spotlights in the driveway, etc.

• Rainfall, pool water ripples/reflections, tree/shrub leaves blowing in the wind – and the shadows they

create can generate motion detection false alarms.

• When you are positioning the camera, bring the monitor along; it’s much easier to get the camera into

the right position when you have the display handy.

7



Install the Camera(s)

①Position the camera where you want it, plug it into power, and check video on the NVR. Move the

camera if the view is not what you want.

②Hold the base of the camera stand where you want to mount it and mark the location of the screw

holes.

③Use the included screws and anchors to attach the base to the wall or ceiling.

④Tug gently on the stand to make sure it is securely in place.

4.3 Set the Antenna Extension

The included antenna extension is supplied to extend the transmitting distance between the camera and

NVR and provide a better signal.

You can use the included Antenna Extension cable

if your setup requires the signal be transmitted

through an obstacle that severely weakens it.

Simply replace the camera antenna with the

Antenna Extension cable and mount it on the

opposing side of the obstacle.

5.SYSTEMOPERATION

5.1 Setup Wizard

Before using the system, please follow the setup wizard to set your system.

NOTE: Among this section, for each step, on the bottom will display a notification to let you

select/unselect.

Default value: select.

Select means next time you reboot/turn on the NVR, system will remember your previous setting and skip

the setup wizard surface to enter the live view section directly.

Unselect means you have to follow the setup wizard every time reboot/turn on the NVR.

8



①Setup New Password

The default user name is “admin”.

Please enter your new password and confirm the new

password.

Select Remember Password, the system will remember

the password you have set.

After confirm the new password, click Next to enter the

next step.

Note: Password should be 4~10 digits. The password can be letter(s) and/or

number(s). Do not use symbols or space in password.

②General System Configuration

This step allows you to set below items:

Date

System Time

Date Format

Time Format (12h or 24h)

Language

Menu Timeout

Confirm above then click Next to enter the next step.

③HDD management

This section display the hard disk list, you can check the

basic information of your HDD (model/capacity/used

space/status).

Select here then click Formatetoformat

theHDD.

Select here to enable the overwrite

function.

Overwrite on: system will overwrite earliest recorded files when HDD is full.

Confirm above then click Next to enter the next step.

④Record Schedule

Channel

SelecttheChannelyouwanttoset.

CopyTo

Selectherecopythesamesettingtoanychannelorallchannels.

Selectthetypeofrecordingyou’dliketoactivate

9



Recordingsettingtype:Continuous,Motion,NoRecord

Leftclickanddragthetabletofillthedesireddateandtimeblocks.

A. UnderContinuoustype,thefilledblocksareinGREEN.

Duringthefilleddateandtimeblocks,NVRwillkeeprecordingcontinuously.

B. UnderMotiontype,thefilledblocksareinYELLOW.

Duringthefilleddateandtimeblocks,NVRwillrecordoncemotionisdetected.

C. UnderNoRecordtype,thefilledblocksareinblank.

D. Confirm above then click Next to enter the next step.

⑤Remote Viewing Setup

Download the WNVR Pro App on your mobile device and scan this QR code of this NVR for remote

viewing.

For more information, please refer to user manual or quick start guide.

NOTE:MakesureNVRisconnectingtoyourlocalrouterbyEthernet cable.

10



After finishing upon setting, then click DONE to complete it and enter to live view screen.

5.2NVRSCREEN

The NVR’s screen has 3 main parts:

•Live View area. The main screen area displays live video from the camera(s).

• Main menu. Those menus allow you to manage the system.

• Icon bars. Most of icons display on the top and bottom of the live view screen.

Viewing Modes

The Live View area displays live video from the cameras. Each camera can display in its own section of

the screen (quadrant) or full screen.

There are multiple viewing modes:

• Quad Mode. Splits the screen’s image area into 4 quadrants and displays active camera video in each

quadrant.

Inhaltsverzeichnis

Andere CasaCam DVR Handbücher

CasaCam

CasaCam VS2072 Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung