CB2 ACACIA Bedienungsanleitung

1 - top

crossbar

1 - bottom

crossbar

Made in Vietnam - r08 Page 1 of 7

acacia MINI BAR

hardware

components

Thank you for purchasing the Acacia Mini Bar. This

page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

tools required

phillips head screwdriver

allen wrench (included)

1 - right side

panel

12 - wood

dowels

8 - cam

screws

Missing hardware? Please call

800.606.6387 for replacements.

1 - large door

front

8 - cams 24 - small

screws

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

1 - left side

panel

1 - partition

1 - top

panel

1 - small door

front

3 - glass

shelves

1- back

panel

4 - drawer sides

(2 left, 2 right)

2 - drawer

backs

2 - drawer

bottoms

16 - large

screws

16 - small

bolts

6 - large

bolts

22 - flat

washers

22 - spring

washers

4 - hinges

4 - legs

4 - pulls

8 - pull

bolts

2 - anchors12 - shelf

supports

(We recommend the use of hand tools instead of power tools)

1 - bottom

panel

2 - drawer

fronts

acacia MINI BAR

Made in Vietnam - r08 Page 2 of 7

Insert 2 cams into bottom crossbar as shown.

Make sure arrows on each cam points toward

nearest edge with holes.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

3 4

Insert 4 wood dowels, 2 cams, and 1 cam screw

into partition and right side panel as shown.

Secure, but do not over tighten, cam screws with a

phillips head screwdriver.

Fit dowels of top/bottom crossbars into

corresponding holes of partition and right side

panel as shown. Using a screwdriver, turn each

cam clockwise until it securely engages each cam

screw.

Attach 4 legs to bottom panel with 4 small bolts,

4 spring washers and 4 flat washers as shown.

Secure, but do not over tighten, bolts with an allen

wrench.

bottom

crossbar

NOTE: Make sure

arrows on each

cam points toward

nearest edge with

holes

partition

right side

panel

NOTE: Do not

over tighten the

cam screws

partition

right side

panel

top

crossbar

bottom

crossbar

bottom

panel

small bolt

spring washer

flat washer

leg

NOTE: Do not

over tighten the

bolts

NOTE: Make sure

plastic piece on

each crossbar face

up and bend towards

the back of assembly

as shown

acacia MINI BAR

Made in Vietnam - r08 Page 3 of 7

Fit dowels of partition and side panels into

corresponding holes of bottom panel assembly as

shown. Secure bottom panel with 6 large bolts, 6

spring washers and 6 flat washers as shown,

using an allen wrench.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

7 8

With the assistance of another adult, carefully

position unit upright. Slide back panel into

grooves of assembled unit as shown. Insert 6 cam screws into top panel as shown.

Insert 4 wood dowels and 2 cams into left side

panel as shown.

bottom panel

assembly

large bolt

spring washer

flat washer

back

panel

left side

panel

top

panel

acacia MINI BAR

Made in Vietnam - r08 Page 4 of 7

Insert tabs of anchor into corresponding corner of

assembled unit of assembled unit as shown.

Secure, but do not over tighten screw with a

screwdriver.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

11 12

Insert 12 shelf supports at desired shelf heights.

anchor

shelf

support

A. Attach 2 hinges to small/large door fronts with

2small screws per hinge as shown. Secure, but

do not over tighten, screws with a screwdriver.

B. Attach pull to each door front with 2 pull bolts,

using a screwdriver.

large door

front

small door

front

NOTE: Do not over

tighten the screws

pull

Fit dowels of assembled unit into corresponding

holes of top panel as shown. Secure all cams.

top

panel

acacia MINI BAR

Made in Vietnam - r08 Page 5 of 7

Slide drawer bottom into groove of drawer

assembly as shown.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

15 16

drawer

bottom

Fit dowel of inner drawer front into corresponding

holes of drawer left side, and secure with 2 large

screws.

drawer

front

drawer left

side

Place 3 glass shelves into assembled unit as

shown. Make sure shelves are securely supported

by shelf supports.

glass

shelf

Refer to Hinge Adjustment

diagram for adjusting the

alignment of the door hinges.

Attach hinges of each door front to side panels as

shown. Secure each hinge with 4 small screws

and 1 hinge bolt, using a screwdriver.

door

front

acacia MINI BAR

Made in Vietnam - r08 Page 6 of 7

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

cleaning and care

Clean surfaces witha dry or damp soft cloth.Do not use

abrasive cleaners. Donot use furniture wax or polish as the

unit is finished with a protective clear lacquer. It is

recommended to use coasters to protect surface from heat

and water. Clean glass shelves with glass cleaner.

Insert 2 drawerassemblies into assembled unit as

shown. Push drawerback until you hear a click.

Assembly is nowcomplete.

Attach pull to drawer front with 2 pullbolts,

using a screwdriver.

Repeat steps 15-19for remaining drawer

assembly.

pull

Fit dowel of drawer backinto corresponding

holesof drawer assembly, and secure with 2 large

screws.

drawer

back

Fit dowels of drawerassemblyinto

corresponding holes of drawer right side and

secure with 4 large screws.

drawer right

side

acacia MINI BAR

Made in Vietnam - r08 Page 7 of 7

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

hinge adjustment

If the doors do not appear square or aligned,loosen or tighten the appropriate screws on each case hinge as illustrated.

Depth adjustment:

Loosen screw A, push hinge arm

forwards or backwards, re-tighten

screw Aand secure screw Bwith

a 1/4 turn clockwise

Height adjustment:

Loosen screw C, adjust door

height and re-tighten screw C

123

Side to side adjustment:

Loosen screw A, adjust gap with

screw Band re-tighten screw A

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung