CB2 CADET Bedienungsanleitung

Made in Thailand - r05 Page 1 of 6

hardware

components

Thank you for purchasing the Cadet Wardrobe. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from

damage.

NOTE: 2 people are required to safely assemble this product.

tools required

cadet WARDROBE

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

19 - cam

screws

9 - large

cams

14 - pan

head

screws

32 - hinge

screws

11 - cam

covers

16 - flat

head

screws

phillips head screwdriver

2 - legs

Missing hardware? Please call 800.606.6387 for

replacements

1 - back panel

2 - side panels

(1 left, 1 right)

1 - top panel 1- bottom panel

1- partition 2 - adjustable

shelves

2 - doors

1- bottom shelf

38 - wood

dowels

(We recommend the use of hand tools instead of power tools)

2 - handles

2 - mounting

screws

1 - top

shelf

8 - handle

bolts

10 - small

cams

2 - plastic

anchors

8 - hinges

2 - shelf

supports

8 - bumpers 8 - shelf pins2 - wall straps

Made in Thailand - r05 Page 2 of 6

1 2

Insert 9 cam screws and 4 wood dowels into

left and right side panels. Secure, but do not

over tighten cam screws with a phillips head

screwdriver.

A) Insert 1 large cam and 4 wood dowels into

partition.

B) Insert 10 small cams and 14 wood dowels

into back panel.

cadet WARDROBE

right side

panel

left side

panel

back panel

NOTE: Make sure

the arrows on each

cam points toward

the nearest edge with

holes

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

A) Insert 4 large cams and 4 wood dowels into

bottom shelf. Make sure arrow on each cam

points toward the nearest edge with holes.

B) Insert 4 large cams, 4 wood dowels and 1

cam screw into top shelf.

bottom

shelf

top

shelf

partition

NOTE: Do not over

tighten the cams

screws

Fit dowels of partition into corresponding holes

of top shelf as shown. Using a screwdriver, turn

cam clockwise until it securely engages the cam

screw.

partition

top

shelf

Made in Thailand - r05 Page 3 of 6

7 8

cadet WARDROBE

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Fit dowels of partition into corresponding holes

of bottom shelf as shown. Secure with 2 large

flat head screws using a screwdriver.

bottom

shelf

A) Fit dowels of back panel into corresponding

holes of left side panel as shown. Secure all

cams.

B) Fit dowels of assembled unit into

corresponding holes of left side panel as

shown. Secure all cams.

left side

panel

A) Fit dowels of assembled unit into

corresponding holes of right side panel. Secure

all cams.

B) At this point, cover all exposed cams with

cam covers.

right side

panel

cam

cover

Fit dowels of assembled unit into corresponding

holes of bottom panel. Secure with 7 large flat

head screws as shown.

bottom panel

shelf

assembly

back panel

Made in Thailand - r05 Page 4 of 6

9 10

cadet WARDROBE

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Fit dowels of assembled unit into corresponding

holes of top panel. Secure with 7 large flat head

screws using a screwdriver.

top panel

A) Attach 4 hinges to each door with 2 hinge

screws per hinge, using screwdriver.

B) Attach 1 handle to each door with 4 handle

bolts, using a screwdriver.

door

handle

hinge

A) Insert 2 wood dowels into each shelf support.

B) Fit dowels of each shelf support into

corresponding holes of each adjustable shelf.

Secure each shelf with 3 large pan head screws

using a screwdriver.

NOTE: Do not over

tighten the screws

adjustable

shelf

support

Attach 2 legs with 3 large pan head screws per

leg using a screwdriver.

leg

shelf

support

Made in Thailand - r05 Page 5 of 6

cadet WARDROBE

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

13 14

With the assistance of another adult, position unit

upright. Insert 8 shelf pins at desired shelf

heights.

B) Place 2 adjustable shelves into assembled

unit. Make sure shelves are securely supported

by shelf pins.

adjustable

shelf

Attach 8 bumpers to shelves of assembled unit

as shown.

bumper

A) With assistance of another adult, attach hinges

of each door onto side panels of assembled unit as

shown. Secure each hinge with 2 hinge screws.

B) Secure the set screws with a screwdriver as

shown. Refer to Hinge Adjustment diagram for

adjusting the alignment of the door hinges.

Assembly is now complete.

hinge adjustment

If the doors do not appear square or aligned, loosen or

tighten the appropriate screws on each case hinge as

illustrated.

2) Depth adjustment:

Loosen screw A, push hinge arm

forwards or backwards, re-tighten

screw Aand secure screw Bwith

a 1/4 turn clockwise.

3) Height adjustment:

Loosen screw C, adjust

door height and re-

tighten screw C.

1) Side to side adjustment:

Loosen screw A, adjust gap

with screw Band re-tighten

screw A.

cadet WARDROBE

Made in Thailand- r05 Page 6 of 6

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

optional wall mounting assembly

These instructions are for drywall mounting only. For safe installation

it is essential to use hardware appropriate for your wall type. Mount to

wood wall studs whenever possible. If you are unsure of what type of

fasteners to use, consult your local hardware store or a qualified profes-

sional. This product is only a deterrent, it is not a substitute for proper

adult supervision.

A. Attach 2 wall straps to back of unit with 1 mounting screw per strap

as shown. Secure, but do not over tighten with a phillips head screw-

driver.

B. With the assistance of another adult, place the unit in desired location

against the wall. Mark the location of the hole in the wall strap on the

wall. Move the unit out of the workspace.

C. Drill holes slightly smaller in diameter than the plastic anchor. Insert 1

plastic anchor into each hole until they are flush to the wall.

D. Place the unit back into position against the wall. Insert 1 pan head

screw through each wall strap and into the plastic anchor.

Wall mounting is now complete.

FRONT OF UNIT

BACK OF UNIT

wall

strap

mounting

screw

plastic

anchor

pan head

screw

WALL

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung