CB2 MONOLITH Bedienungsanleitung

monolith WARDROBE

Thank you for purchasing the Monolith Wardrobe.This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as the individual components

to this product. As

you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect

them from damage.

Note: 2 people are required to safely assemble this product.

NOTE: Wardrobe doors and storage can be configured in two orientations:

Left or Right. Please refer to the following instructions appropriate to your

preferred orientation.

Monolith Wardrobe (Left) Monolith Wardrobe (Right)

mounting hardware

tools required

(We recommend the use of hand tools instead of power tools)

phillips head screwdriver

20 - cams 20- cam

screws

36 - hinge

screws

10 - flat

washers

10 - spring

washers

4 - small

screws

4 - large

screws

4 - wall

brackets

2 - wall

straps

4 - plastic

anchors

32 - wood

dowels

10 - bolts 16 - shelf

supports

6 - hinges 4 - back

screws

Made in Vietnam - r03 Page 1 of 6

monolith WARDROBE (LEFT)

assembly hardware

components

Missing hardware?

Please call 800.606.6387 for replacements.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

1 - top panel1 - base 2 - large fixed

shelves

2 - large adjustable

shelves

2 - small adjustable

shelves

2 - small fixed

shelves

1 - partition

2 - side panels

(1 left, 1 right)

1 - back panel

1 - large

door

1 - small

door

monolith WARDROBE (LEFT)

MadeinVietnam -r03 Page2of6

CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com

large fixed

shelf

A. Insert 2 cams into base as shown.

B. Insert 2 cam screws into top panel as

shown.

A. Insert 4 cams into large fixed shelf as

shown. Make sure arrows of each cam points

towards nearest edge with holes.

B. Insert 4 cams into small fixed shelf as

shown.

small fixed

shelf

NOTE:Make sure arrows

of each cam points towards

nearest edge with holes

NOTE:Do not

over tighten the

cam screws

base

top panel

A. Insert 10 wood dowels and 5 cam screws

into right and left side panels as shown, using

a phillips head screwdriver. Do not over

tighten the cam screws.

B. Insert 12 wood dowels, 8 cam screws, 2

cams into partition as shown.

left and right

side panels

Fit 2 small fixed shelves and 2 large fixed

shelves onto corresponding dowels of partiton

as shown. Using a screwdriver, turn each cam

clockwise until it securely engages each cam

screw.

Bpartition

small fixed

shelf

large fixed

shelf

partition

monolith WARDROBE (LEFT)

MadeinVietnam -r03 Page 3of6

CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com

A. Fit dowels and cam screws of left side panel

into corresponding holes of assembly as shown.

Secure cams.

B. Secure base to left side panel with 2 bolts, 2

spring washers and 2 flat washers, using a

screwdriver. Secure cam.

With assistance of another adult, position

assembly on its left side as shown. Fit back

panel into corresponding grooves of base and

left side panel as shown.

left side

panel

back panel

Fit dowels of assembly into corresponding holes

of base, and secure with 2 bolts, 2 spring

washers and 2 flat washers, using a screw-

driver. Do not over tighten the bolts.

partition

base

small fixed

shelf

NOTE:Do not over

tighten the bolts

large fixed

shelf

base

partition

large fixed

shelf

small fixed

shelf

A. Fit dowels and cam screws of right side

panel into corresponding holes of assembly.

Secure cams.

B. Secure base to right side panel with 2 bolts,

2 spring washers and 2 flat washers. Secure

cam.

right side

panel

monolith WARDROBE (LEFT)

MadeinVietnam -r03 Page4of6

CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com

A. Attach 3 hinges to large door with 2 hinge

screws per hinge as shown, using a screw-

driver. Do not over tighten the screws.

B. Attach 3 hinges to small door with 2 hinge

screws per hinge.

large

door

NOTE: Do not over

tighten the screws

1211

A. With assistance of another adult, position unit

upright. Attach hinges of large door to right

side panel with 4 hinge screws per hinge.

B. Attach hinges of small door to left side

panel with 4 hinge screws per hinge.

top

panel

A. Fit cam screws of top panel into correspond-

ing holes of partition shown. Secure cams.

B. Secure left and right side panels to top

panel with 2 bolts, 2 spring washers and 2 flat

washers.

small

door

large

door

small

door

A. Insert 16 shelf supports at desired shelf

heights.

B. Place 2 large adjustable shelves and 2

small adjustable shelves into assembly. Make

sure shelves are securely supported by shelf

supports.

large

adjustable

shelf

small

adjustable

shelf

Refer to Hinge Adjustment

diagram for adjusting the

alignment of the door hinges.

monolith WARDROBE (LEFT)

Made in Vietnam - r03 Page 5 of 6

Secure back panel

with 4 back screws

as shown.

Assembly is now

complete.

cleaning & care

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as

the unit is finished with a protective clear lacquer.

back panel

hinge adjustment

If the doors do not appear square or aligned,loosen or tighten the appropriate screws on each case hinge as illustrated.

Depth adjustment:

Loosen screw A, push hinge arm

forwards or backwards, re-tighten

screw Aand secure screw Bwith

a 1/4 turn clockwise

Height adjustment:

Loosen screw C, adjust door

height and re-tighten screw C

1 2 3

Side to side adjustment:

Loosen screw A, adjust gap with

screw Band re-tighten screw A

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

monolith WARDROBE (LEFT)

Made in Vietnam - r03 Page 6 of 6

For added safety and stability, it is recommended that the wall mounting hardware be installed.

For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster,

drywall, concrete, etc.). Mount to wood studs whenever possible.

A) Attach 2 mounting brackets to top of unit using 2 small screws per bracket.

B) Determine the final location of unit. Mark position on the wall, approximately 2" below each

mounting brackets mounted to the back of the unit.

C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly

smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is

flush with the wall.

D) Attach the mounting brackets to the wall by inserting 2 large screws through each mounting

bracket and into the wall anchor in the wall.

E) Position the unit so the mounting bracket on the back edge is allowed with the wall bracket.

F) Lace one end of each wall strap through corresponding brackets, and into the other end of the

strap.

G) Pull the straps tightly until secure.

Wall mounting assembly is now complete.

NOTE:

If you are unsure about your wall type or what

mounting method you should use, consult a

qualified professional or your local hardware store.

wall mounting assembly

small

screw

mounting

bracket

plastic

anchor

large

screw

wall

strap

mounting

bracket

WALL

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Made in Vietnam - r06 Page 1 of 6

monolith WARDROBE (RIGHT)

assembly hardware

mounting hardware

components

tools required

Missing hardware?

Please call 800.606.6387 for replacements.

(We recommend the use of hand tools instead of power tools)

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

phillips head screwdriver

20 - cams

1 - top panel

20- cam

screws

36 - hinge

screws

10 - flat

washers

10 - spring

washers

4 - small

screws

4 - large

screws

4 - wall

brackets

2 - wall

straps

4 - plastic

anchors

32 - wood

dowels

10 - bolts 16 - shelf

supports

6 - hinges

1 - base 2 - large fixed

shelves

2 - large adjustable

shelves

2 - small adjustable

shelves

2 - small fixed

shelves

1 - partition

2 - side panels

(1 left, 1 right)

1 - back panel

1 - large

door

1 - small

door

4 - back

screws

monolith WARDROBE (RIGHT)

MadeinVietnam -r06 Page2of6

CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com

large fixed

shelf

A. Insert 2 cams into base as shown.

B. Insert 2 cam screws into top panel as

shown.

A. Insert 4 cams into large fixed shelf as

shown. Make sure arrows of each cam points

towards nearest edge with holes.

B. Insert 4 cams into small fixed shelf as

shown.

small fixed

shelf

NOTE:Make sure arrows

of each cam points towards

nearest edge with holes

NOTE:Do not

over tighten the

cam screws

base

top panel

A. Insert 10 wood dowels and 5 cam screws

into right and left side panels as shown, using

a phillips head screwdriver. Do not over

tighten the cam screws.

B. Insert 12 wood dowels, 8 cam screws, 2

cams into partition as shown.

left and right

side panels

Fit 2 small fixed shelves and 2 large fixed

shelves onto corresponding dowels of partiton

as shown. Using a screwdriver, turn each cam

clockwise until it securely engages each cam

screw.

Bpartition

small fixed

shelf

large fixed

shelf

partition

monolith WARDROBE (RIGHT)

MadeinVietnam -r06 Page 3of6

CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com

A. Fit dowels and cam screws of left side panel

into corresponding holes of assembly as shown.

Secure cams.

B. Secure base to left side panel with 2 bolts, 2

spring washers and 2 flat washers, using a

screwdriver. Secure cam.

With assistance of another adult, position

assembly on its left side as shown. Fit back

panel into corresponding grooves of base and

left side panel as shown.

left side

panel

back panel

Fit dowels of assembly into corresponding holes

of base, and secure with 2 bolts, 2 spring

washers and 2 flat washers, using a screw-

driver. Do not over tighten the bolts.

partition

base

small fixed

shelf

NOTE:Do not over

tighten the bolts

large fixed

shelf

base

partition

large fixed

shelf

small fixed

shelf

A. Fit dowels and cam screws of right side

panel into corresponding holes of assembly.

Secure cams.

B. Secure base to right side panel with 2 bolts,

2 spring washers and 2 flat washers. Secure

cam.

right side

panel

Andere Handbücher für MONOLITH

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung