CB2 THE WALL Bedienungsanleitung

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Made in Vietnam - r02 Page 1 of 4

the wall

BATH CABINET

Thank you for purchasing The Wall bath cabinet. This

page lists all the contents included in the box. Please take

the time to identify the hardware as well as the individual

components to this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are recommended to safely assemble this product.

components

hardware

mounting hardware

tools required

12 - dowels

3 - hinges

4 -plastic

anchors

4 -small

screws

4 -large

screws

12 - bolts 8 - shelf

pins

Missing hardware?

Please call 800.606.6387 for

replacements.

1 - top panel

2 - side panels

(1 left, 1 right)

1 - door

1 - bottom panel 1 - fixed shelf

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

18 - screws

2 - adjustable

shelves

1 - back panel

4 -mounting

brackets

2 -wall

straps

Made in Vietnam - r02 Page 2 of 4

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

A. Insert 2 dowels into left side panel as shown.

B. Fit fixed shelf onto dowels, and attach to side

panel with 2 bolts. Secure, but do not over tighten

bolts with a phillips head screwdriver.

NOTE: Do not over

tighten the bolts.

fixed shelf

3 4

A. Insert 2 dowels into fixed shelf as shown.

B. Fit back panel into corresponding slot in left

side panel.

C. Fit right side panel onto dowels and back

panel, and attach to side panel with 2 bolts.

left side

panel

A. Insert 4 dowels into side panels as shown.

B. Attach bottom panel to assembly and secure

with 4 bolts.

A. Insert 4 dowels into side panels as shown.

B. Attach top panel to assembly and secure with

4 bolts.

the wall

BATH CABINET

right side

panel

back

panel

top

panel

bottom

panel

Made in Vietnam - r02 Page 3 of 4

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Fit 3 hinges into door as shown and attach with 2

screws per hinge. Secure, but do not over tighten

screws with a screwdriver. 6

Attach door to case assembly by aligning holes in

hinges with holes in side panel. Secure each

hinge with 4 screws.

Insert 8 shelf pins at desired shelf heights. Place

each adjustable shelf on pins, making sure shelf

is securely supported by shelf pins.

Assembly is now complete.

the wall

BATH CABINET

door

cleaning and care

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners.

NOTE:

Door can be

installed on

either left or

right side

Made in Vietnam - r02 Page 4 of 4

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

the wall

BATH CABINET

For added safety and stability, it is recommended that the wall mounting

hardware be installed. For safe mounting, it is essential to use wall anchors

appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to

wood studs whenever possible.

NOTE: If you are unsure about your wall type or what mounting

method you should use, consult a qualified professional or your local

hardware store.

A) Attach 2 mounting brackets to top of unit using 2 small screws per

bracket.

B) Determine the final location of unit. Mark position on the wall,

approximately 2" below the mounting bracket mounted to the back of the

unit.

C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in

the wall that is slightly smaller in diameter than the anchor. Gently tap the

plastic anchor until the flange of the anchor is flush with the wall.

D) Attach 2 mounting brackets to the wall by inserting 2 large screws

through each mounting bracket and into the wall anchor.

E) Place the unit so the mounting brackets on the back edge are aligned

with the wall brackets.

F) Lace one end of each wall strap through brackets, and into the other

end of the strap.

G) Pull the strap tightly until secure.

Wall mounting assembly is now complete.

Depth adjustment:

Loosen screw A, push hinge arm

forwards or backwards, re-tighten

screw Aand secure screw Bwith

a 1/4 turn clockwise

Height adjustment:

Loosen screw A & B, adjust door

height and re-tighten screws A&B

123

Side to side adjustment:

Loosen screw A, adjust gap with

screw Band re-tighten screw A

hinge adjustment

If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as

illustrated.

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung