CB2 RODNEY Bedienungsanleitung

(We recommend the use of hand tools instead of power tools)

Made in Vietnam - r06 Page 1 of 5

rodney TALL CHEST

hardware

tools required

Thank you for purchasing the Rodney Tall Chest. This

page

lists all the contents included in the box. Please take

the time

to identify the hardware as well as the individual

components

to this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

Missing hardware? Please call

800.606.6387 for replacements.

1 - top panel

12 - spring

washers

4 - large

bolts

12 - flat

washers

Customer Service 800.606.6252 I Latest instructions available on www.cb2.com

allen wrench

(included)

components

1 - bottom panel

1 - back panel

8 - small

bolts

32 - screws

philips head screwdriver

2 - side panels

(1 left, 1 right)

1 - middle panel

4 - drawer

fronts

4 - drawer

backs 8 - drawer sides

(4 left, 4 right)

4 - drawer

bottoms

2 - legs

4 - wall

brackets

4 - large

screws

4 - plastic

anchors

4 - small

screws

mounting hardware

2 - wall

straps

4 - brackets 6 - small

screws

Made in Vietnam - r06 Page 2 of 5

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

With the assistance of another adult, carefully

place left/right side panels and middle panel

onto clean padded surface as shown. Attach

middle panel to left and right side panels with 4

brackets, 4 flat washers, 4 spring washers and

4large bolts, using an allen wrench. Do not over

tighten the bolts.

NOTE: Do not over

tighten the bolts.

middle

panel

3 4

rodney TALL CHEST

Position top panel as shown. Fit pre-assembled

dowels of left and right side panels into

corresponding holes of top panel. Secure left and

right side panels to top panel with 4 flat

washers, 4 spring washers and 4 small bolts as

shown, using a phillips head screwdriver.

right side

panel

left side

panel

A. Slide back panel into grooves of left and right side panels.

B. Fit pre-assembled dowels of left and right side panels into

corresponding holes of bottom panel. Secure left and right side

panels to bottom panel with 4 flat washers, 4 spring washers

and 4 small bolts, using a phillips head screwdriver.

C. Secure back panel to top and bottom panel with 6 small

screws, as shown.

back panel

NOTE: Make sure left

and right side panels are

assembled with grooves

facing back as shown

Attach 2 legs to assembled unit

by turning each leg clockwise

as shown.

bottom panel

top panel

leg

rodney TALL CHEST

Made in Vietnam - r06 Page 3 of 5

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

5 6

7 8

Fit pre-assembled dowels of drawer front into

corresponding holes of drawer side. Secure

drawer front to drawer side with 2 screws as

shown, using a phillips head screwdriver. Do not

over tighten the screws.

Fit pre-assembled dowels of drawer side into

corresponding holes of drawer back. Secure

drawer back to drawer side with 2 screws

using a screwdriver.

Slide drawer bottom into corresponding grooves

of drawer assembly.

drawer

front

drawer

side

drawer

back

drawer

bottom

NOTE: Do not over

tighten the screws

drawer

side

Fit pre-assembled dowels of drawer back and

front into corresponding holes of drawer side.

Secure drawer side with 4 screws as shown

using a screwdriver. Repeat steps 5-8 for

remaining drawers.

NOTE: Make sure glide

is positioned as shown

rodney TALL CHEST

Made in Vietnam - r06 Page 4 of 5

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

drawer

assembly

With the assistance of another adult, position

unit upright. Fit drawer glides of drawer into

corresponding drawer glides of assembly as

shown. Firmly push drawer into assembly until

the glides are securely engaged.

Assembly is now complete.

cleaning & care

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as

the unit is finished with a protective clear lacquer.

NOTE:

Make sure glides are

pulled out of the case, and

ball bearings are at the front of

the extended glides

NOTE: Make sure to

keep drawer level so

as not to damage glides

during assembly

rodney TALL CHEST

Made in Vietnam - r06 Page 5 of 5

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

safety mounting instructions

NOTE:

If you are unsure about your wall type or what mounting

method you should use, consult a qualified professional

or your local hardware store.

For added safety and stability, it is recommended that the

wall mounting hardware be installed. For safe mounting, it is

essential to use wall anchors appropriate to your wall type

(i.e. plaster, drywall, concrete, etc.). Mount to wood studs

whenever possible.

A) Attach 1 wall bracket to top of unit as shown, using 2

small screws per bracket.

B) Determine the final location of unit. Mark position on the

wall, approximately 2" below the bracket mounted to the

back of the cabinet.

C) Drill a hole in the wall stud. If the wall stud is not

available, drill a hole in the wall that is slightly smaller in

diameter than the anchor. Gently tap the plastic anchor

until the flange of the anchor is flush with the wall.

D) Attach the wall bracket to the wall by inserting 2 large

screws through the wall bracket and into the wall anchor in

the wall.

E) Place the unit so the wall bracket on the back edge is

aligned with the wall bracket.

F) Lace one end of the wall strap through both brackets,

and into the other end of the strap.

G) Pull the strap tightly until secure. Repeat steps for

remaining brackets and wall strap.

Fwall

bracket

small

screw

wall

bracket

plastic

anchor

large

screw

wall

strap

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung