CB2 SIDECAR Bedienungsanleitung

Made in Thailand - r05 Page 1 of 5

sidecar HIGH DINING TABLE

hardware

tools required

Thank you for purchasing the Sidecar High Dining

Table. This page

lists all the contents included in the

box. Please take the time

to identify the hardware as

well as the individual components

to this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

It is recommended that a rubber mallet or other soft surfaced

tool be used for assembly.

Missing hardware? Please call

800.606.6387 for replacements.

allen wrench (included)

18 - cams

components

49 - wood

dowels

10 - cam

covers

18 - cam

screws

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

1 - tabletop 1 - left side panel 1 - right side panel 1 - leg frame

1 - back

panel (#1)

1 - partition (#2) 1 - top back

panel (#3)

1 - top crossbar2 - fixed back

shelves (#7)

1 - bottom front

panel (#6)

2 - fixed front

shelves (#8)

1 - bottom crossbar

1 - bottom back

panel (#5)

1 - top front

panel (#4)

8 - small

bolts

6 - medium

bolts

6 - levelers

8 - large

bolts

2 - brackets

4 - small

screws

6 - large

screws

phillips head screwdriver

rubber mallet

(We recommend the use of hand tools instead of power tools)

1 2 3

5 6

7 8

sidecar HIGH DINING TABLE

Made in Thailand - r05 Page 2 of 5

Insert 4 cam screws into right side panel as

shown.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

3 4

Insert 2 cam screws and 6 wood dowels into

partition (#2) as shown.

Insert 4 cam screws into back panel (#1) as

shown.

Insert 8 cam screws and 3 wood dowels into left

side panel as shown. Secure but do not over

tighten cam screws with a phillips head

screwdriver.

left side

panel

NOTE: Do not

over tighten the

cam screws

right side

panel

partition

back panel

sidecar HIGH DINING TABLE

Made in Thailand - r05 Page 3 of 5

A. Insert 2 cams and 6 wood dowels into

bottom back panel (#5) as shown. Make sure

arrows on each cam points toward nearest edge

with holes.

B. Insert 2 cams and 4 wood dowels into bottom

front panel (#6) as shown.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

7 8

A. Insert 3 cams and 6 wood dowels into fixed

back shelf (#7) as shown.

B. Insert 2 cams and 4 wood dowels into fixed

front shelf (#8) as shown.

A. Attach bottom front panel (#6) and top front

panel (#4) to partition (#2). Secure, but do not

over tighten each panel with 2 large screws, using

a screwdriver.

B. Attach 2 fixed front shelves (#8) to partition

(#2) with 1 large screw per shelf as shown.

A. Insert 2 cams and 6 wood dowels into top

back panel (#3) as shown. Make sure arrows on

each cam points toward nearest edge with holes.

B. Insert 2 cams and 4 wood dowels into top

front panel (#4) as shown.

NOTE: Make sure

arrows on each

cam points toward

nearest edge with

holes

top panel

(back)

NOTE: Do not

over tighten the

screws

top panel

(front)

bottom panel

(back)

bottom panel

(front)

fixed shelf

(back)

fixed shelf

(front)

top panel

(front)

bottom panel

(front)

fixed shelf

(front)

fixed shelf

(front)

Make sure the glossy side

of the top front panel (#4) is

facing down towards the

bottom front panel (#6) as shown.

sidecar HIGH DINING TABLE

Made in Thailand - r05 Page 4 of 5

With the assistance of another adult, carefully

place left side panel onto a clean, padded surface

as shown. Fit dowels of assembled unit into

corresponding holes of right side panel as shown.

Secure all cams.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

11 12

Fit cam screws of right side panel into

corresponding holes of assembled unit as shown.

Secure all cams.

A. With the assistance of another adult, carefully

position the assembled unit as shown. Fit cam

screws of back panel into corresponding holes of

assembled unit as shown. Secure all cams.

B. Cover all exposed cams with cam covers as

shown.

A. Fit dowels of bottom back panel (#5) and top

back panel (#3) into corresponding holes of

assembled unit.

B. Fit dowels of 2 fixed back shelves (#7) into

corresponding holes of assembled unit as shown.

Make sure the glossy edge of both panels are

facing up. Using a screwdriver, turn each cam

clockwise until it securely engages each cam

screw. 10

right side

panel

back

panel

VIEW FROM BELOW

bottom panel

(back)

top panel

(back)

fixed shelf

(back)

fixed shelf

(back)

left side

panel

top of unit

Make sure the glossy side

of the top back panel (#3) is

facing down toward the bottom

back panel (#5) as shown, and

that the high gloss edge of

all panels are facing up.

NOTE: Make sure taller panels are

attached to the left side panel

using cam screws and dowels

positioned closer to the long edge

of the panel as shown.

sidecar HIGH DINING TABLE

Made in Thailand - r05 Page 5 of 5

A. Fit bottom/top crossbars onto corresponding

brackets of assembled unit as shown. Secure

each bracket with 2 small bolts, using an allen

wrench. Do not over tighten the bolts.

B. At the point, fit bottom/top crossbars onto

corresponding brackets of leg frame as shown.

Secure each bracket with 2 small bolts.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

15 16

Attach top panel to assembled unit with 8 large

bolts for leg/crossbar assembly and 6 medium

bolts for storage assembly as shown. Secure all

bolts with an allen wrench.

Insert 6 levelers to bottom of assembled unit as

shown. Turn clockwise to secure/adjust. With the

assistance of another adult, carefully position unit

upright.

Assembly is now complete.

With the assistance of another adult, carefully

position unit upright as shown. Attach 2 brackets

to left side panel of assembled unit with 2 small

screws per bracket as shown. Secure screws

with a screwdriver. 14

leveler

top panel

storage

assembly

leg/crossbar

assembly

cleaning and care

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. It is recommended to use coasters to protect

surface from heat and water. When moving the assembled table to a new location, it is recommended that the table is picked

up on both sides by 2 adults, carried and gently placed down at the new location. Never drag the table as this could cause

damage.

NOTE: Make sure open

part of each bracket

is facing up as shown

leg frame

bottom

crossbar

top

crossbar

NOTE: Do not

over tighten the

bolts

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung