CB2 SIESTA Bedienungsanleitung

hex wrench (included)

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Made in Vietnam - r08 Page 1 of 6

siesta

BED

hardware

tools required

Thank you for purchasing the Siesta Bed. This

page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are recommended to safely assemble this product.

Missing hardware? Please call

800.606.6387 for replacements.

2 - pins

4 - small

spring

washers

2 - large

screws

components

1 - headboard

rail

2 - side rails

(1 left, 1 right) 1 - center rail

3 - center

rail legs

2 - slat

assemblies

4 - small

flat washers

4 - hex bolts 4 - brackets

4 - large

bolts

2 - medium

bolts

4 - threaded

connectors

2 - small

bolts

12 - small

screws

allen wrench (included)

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

1 - head rail 1 - foot rail

2 - long legs

(1 left, 1 right)

2 - short legs

(1 left, 1 right)

flat head screwdriver

2 - uprights

10 - large

spring

washers

10 - large

flat washers

siesta

BED

Fit 2 threaded connectors into left and right

side rails as shown. Secure, but do not over

tighten, each threaded connector with a flat head

screwdriver.

Made in Vietnam - r08 Page 2 of 6

A. Fit threaded connector of right side

frame into corresponding holes of head and

foot rails.

B. Fit each threaded connector through 1

bracket, 1 large flat washer, 1 large spring

washer and 1 hex nut. Secure assembly

using a hex wrench.

Repeat for left side rail.

threaded

connector

left and right

side rail

head rail

foot rail

left side rail

hex nut

large spring washer

bracket

large flat washer

threaded

connector

NOTE: Make sure

label “THIS SIDE

DOWN” is visible

during assembly

right side rail

2.625”

5”

NOTE: The end of the

side rail with 2.625” of

space from the end

attached to the head rail

NOTE: The end of the side

rail with 5” of space from the

end attached to the foot rail

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

siesta

BED

Made in Vietnam - r08 Page 3 of 6

right

short leg

With the assistance of another adult, turn

assembly and fit pre-assembled dowels of left

and right short legs into corresponding holes

of left and right side rails. Secure each

short leg with 1 large flat washer, 1 large

spring washer and 1 large bolt, using an

allen wrench. Do not over tighten the bolts.

left

short leg

NOTE: Do not over

tighten the bolts

Fit pre-assembled dowels of left and right

long legs into corresponding holes of left

and right side rails. Secure each long leg

with 1 large flat washer, 1 large spring

washer and 1 large bolt, using an allen

wrench.

right

long leg

left

long leg

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

siesta

BED

Made in Vietnam - r08 Page 4 of 6

A. Attach 2 uprights to headboard rail by

turning each upright clockwise to secure.

B. Fit 2 pins into headboard rail as shown.

headboard

rail

upright

A. With the assistance of another adult, fit

uprights and pins of headboard rail into

corresponding holes of assembled unit as

shown. Secure each upright with 1 large flat

washer, 1 large spring washer and 1

medium bolt, using an allen wrench.

B. Secure headboard rail to long legs with

1 small flat washer, 1 small spring washer

and 1 large screw per leg as shown, using a

phillips head screwdriver. Do not over

tighten the screws.

NOTE: Do not over

tighten the screws

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

siesta

BED

Made in Vietnam - r08 Page 5 of 6

Attach 3 center rail legs to center rail as

shown. Secure by turning each leg clock-

wise.

center rail

leg

Fit center rail assembly into brackets of

head and foot rails as shown. Secure

center rail with 2 small flat washers, 2

small spring washers and 2 small bolts,

using an allen wrench.

center rail

assembly

bracket

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

cleaning & care

Clean surfaces with a dry or damp soft cloth.

Do not use abrasive cleaners.

siesta

BED

Made in Vietnam - r08 Page 6 of 6

Attach 2 slat assemblies to left/right side

frames and center rail with 12 small

screws as shown. Make sure each slat is

securely attached.

Assembly is now complete.

slat

assembly

slat

assembly

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung