CB2 ASH Bedienungsanleitung

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Made in Vietnam - r04 Page 1 of 4

ash

BATH CABINET

assembly hardware

wall mounting hardware

tools required

Thank you for purchasing the Ash Bath Cabinet.

This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well

as the individual components

to this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are recommended to safely assemble this product.

Missing hardware?

Please call 800.606.6387 for replacements.

A. Insert 4 cam screws into left and right side

panels as shown. Secure, but do not over tighten,

cam screws with a phillips head screwdriver.

B. Insert 2 cams into left and right side panels as

shown. Make sure arrows on cams point towards

nearest edge with holes.

12 - cam

screws

12 - cams 8 - shelf

supports

1 - top

panel

2 - doors

2 - adjustable

shelves

1 - leg assembly

1 - side panels

(1 left, 1 right)

1 - back

panel

phillips head screwdriver

NOTE: Do not over

tighten the cam screws

right side

panel

components

(We recommend the use of hand tools instead of power tools)

left side

panel

NOTE: Make sure arrows

on cams point towards

nearest edge with holes

2 - plastic

anchors

2 - screws

FACING INSIDE

leg assembly back panel

top panel

Insert 4 cam screws into leg assembly as

shown.

A. Insert 4 cams into top panel as shown.

B. Insert 4 cams into back panel as shown.

ash

BATH CABINET

Made in Vietnam - r04 Page 2 of 4

4 5

2 3

Fit dowels of top panel into left side panel as

shown and secure cams.

A. Fit pre-assembled dowels of back panel into

corresponding holes of left side panel as

shown.

B. Using a screwdriver, turn each cam clock-

wise until it securely engages each cam screw.

back panel

left side

panel

back panel

top

panel

left side

panel

FACING INSIDE

NOTE: Make sure

label, “Facing Inside,”

on back panel is

positioned as shown

during assembly

FACING INSIDE

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

ash

BATH CABINET

Fit dowels of top panel into corresponding holes

of right side panel and secure cams.

Made in Vietnam - r04 Page 3 of 4

6 7

With the assistance of another adult, fit dowels

of side panels into corresponding holes of leg

assembly and secure cams.

Fit hinges of each door onto corresponding

hinges of side panels and tighten with

pre-attached screw, using a screwdriver.

right side

panel

leg

assembly

door

WALL

Determine the final location of unit. With the

assistance of another adult, position unit upright

against wall and mark the 2 holes position in the

back panel. Set unit aside. Drill a hole in the wall

stud. If a wall stud is not available, drill a hole in the

wall that is slightly smaller in diameter than the

anchor. Gently tap the plastic anchors until the

flange of the anchor is flush with the wall. Align

holes of wall and unit. Insert 2 large screws

through the back panel and into the wall anchor in

the wall.

Refer to Hinge Adjustment

diagram for adjusting the

alignment of the door hinges.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

ash

BATH CABINET

Made in Vietnam - r04 Page 4 of 4

cleaning & care

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as

the unit is finished with a protective clear lacquer.

hinge adjustment

If the doors do not appear square or aligned,loosen or tighten the appropriate screws on each case hinge as illustrated.

Depth adjustment:

Loosen screw A, push hinge arm

forwards or backwards, re-tighten

screw Aand secure screw Bwith

a 1/4 turn clockwise

Height adjustment:

Loosen screw C, adjust door

height and re-tighten screw C

1 2 3

Side to side adjustment:

Loosen screw A, adjust gap with

screw Band re-tighten screw A

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

A. Insert 8 shelf supports into side panels as

shown.

B. Place 2 adjustable shelves onto shelf

supports. Make sure each shelf is securely

supported by shelf supports.

Assembly is now complete.

adjustable shelf

Inhaltsverzeichnis

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung