CB2 Veer Bedienungsanleitung

Made in Vietnam - r04 Page 1 of 6

veer WARDROBE

assembly hardware

wall mounting hardware

components

tools required

Thank you for purchasing the Veer Wardrobe.This page

lists all the contents included in the box. Please take the

time

to identify the hardware as well as the individual

components

to this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this product. Missing hardware? Please call 800.606.6387 for replacements.

(We recommend the use of hand tools instead of power tools)

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

phillips head screwdriverallen wrench (included)

28 - wood

dowels

8 - cams 8 - cam

screws

12 - small

bolts

8 - large

bolts

4 - pull

bolts

12- medium

bolts

12 - small

flat washers

12 - small

spring washers

20 - large

flat washers

20 - large

spring washers

16 - drawer

screws

4 - bolt

caps

7 - back

screws

16 - shelf

supports

36 - hinge

screws

6 - hinges

4 - plastic

anchors

4 - large

screws

4 - small

screws

2 - wall

straps

4 - mounting

brackets

1 - top panel 1 - bottom panel

2 - top fixed

shelves

1 - back panel

2 - pulls

2 - side panels

(1 right, 1 left)

2 - doors

(1 right, 1 left)

2 - bottom fixed

shelves

1 - partition

1 - rod 4 - legs4 - adjustable

shelves

2 - drawer

backs

4 - drawer sides

(2 right, 2 left)

2 - drawer

fronts

2 - drawer

bottoms

veer WARDROBE

Made in Vietnam - r04 Page 2 of 6

A. Insert 4 cams into 2 bottom fixed shelves as

shown. Make sure arrows on each cam points

towards nearest edge with holes.

B. Insert 8 wood dowels and 2 cam screws into

partition as shown. Secure, but do not over

tighten, cam screws with a phillips head

screwdriver.

A. Fit dowels of right side panel

into corresponding holes of 1 top

and bottom fixed shelves as

shown. Using a screwdriver,

attach top shelf to right side

panel with 2 small bolts, 2 small

spring washers and 2 small flat

washers.

B. Attach bottom shelf to left

side panel, by turning each cam

clockwise until it securely

engages the cam screw.

Repeat steps 3A and 3B for

partition.

NOTE: Do not

over tighten

the cam screws

Insert 8 wood dowels and 2 cam screws into

right and left side panels as shown.

partition

right side panel

right side

panel

partition

top fixed

shelf

bottom fixed

shelf

bottom fixed

shelf

small flat washer

small spring washer

NOTE: Do not

over tighten

the bolts

NOTE: Position

bracket for rod down

when inserting hardware

NOTE: Make sure the

bracket for the rod faces

away from right side panel

during assembly

left side panel

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

NOTE: Make sure arrows on

each cam points towards

nearest edge with holes

veer WARDROBE

Made in Vietnam - r04 Page 3 of 6

A. Fit bottom panel onto dowels of assembly as

shown. Attach bottom panel to side panels with 6

medium bolts, 6 large spring washers and 6

large flat washers, using an allen wrench.

B. Attach bottom panel to partition with 2 small

bolts, 2 small spring washers and 2 small flat

washers as shown, using a screwdriver.

A. Fit back panel into corresponding grooves of

side panels as shown.

B. Attach 4 legs to bottom of assembly with 2

large bolts, 2 large spring washers and 2 large

flat washers per leg, using an allen wrench.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

NOTE: Make sure grooves

in side panels are facing

each other and positioned

as shown

A. Insert 4 wood dowels and 4 cam screws into

partition as shown.

B. Fit dowels of partition into corresponding holes of

remaining top and bottom fixed shelves. Attach top shelf to

partition with 2 small bolts, 2 small spring washers and 2

small flat washers. Secure cams in bottom shelf to

partition.

Repeat steps 4A and 4B for left side panel.

small flat washer

small spring washer

left side

panel

partition

top fixed

shelf

bottom

fixed

shelf

small flat washer

small spring

washer

large flat washer

large spring

washer

back panel

NOTE: Make sure the

brackets for the rod are

facing each other and

positioned towards the

top of assembly

large flat washer

large spring

washer

910

veer WARDROBE

Made in Vietnam - r04 Page 4 of 6

With assistance of another adult, position unit

upright and secure back panel with 7 back

screws as shown, using a screwdriver.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

top panel

A. Fit top panel onto dowels of assembly as

shown. Attach top panel to assembly with 6

medium bolts, 6 large spring washers and 6

large flat washers, using an allen wrench.

B. Attach top panel to partition with 2 small bolts,

2 small spring washers and 2 small flat washers,

using a screwdriver.

A. Using a screwdriver, attach 3 hinges to left

and right doors with 2 hinge screws per hinge

as shown.

B. Attach hinges of left and right doors to side

panels with 4 hinge screws per hinge as shown.

NOTE: Reference diagram

for adjusting hinges at the

end of these instructions

right and

left doors

pull

Attach 1 pull to right and left doors with 2 bolt

caps and 2 pull bolts as shown, using an allen

wrench.

NOTE: Do not

over tighten the

screws

11 12

veer WARDROBE

Made in Vietnam - r04 Page 5 of 6

A. Place 2 drawers into bottom shelves of

assembly.

B. Place 4 adjustable shelves into assembly.

Make sure each shelf is securely supported by

shelf supports.

C. Fit rod onto brackets of left side panel and

partition. Assembly is now complete.

rod

adjustable

shelf

drawer

cleaning & care

Clean surfaces with a dry or damp soft cloth. Do not use abrasive

cleaners. Do not use furniture wax or polish as the unit is finished with

a protective clear lacquer.

A. Attach left drawer side to drawer front and

drawer back with 4 drawer screws, using a

screwdriver.

B. Fit drawer bottom into grooves of drawer

front/back.

C. Attach right drawer side to drawer front/back

with 4 drawer screws.

Repeat steps 11A-C for remaining drawer assembly.

Insert 16 shelf supports into assembly at desired

shelf heights as shown. Press firmly to secure.

drawer

back

drawer

front

drawer

bottom

drawer

left

drawer

right

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

hinge adjustment

If the doors do not appear square or aligned,loosen or tighten the

appropriate screws on each case hinge as illustrated.

Depth adjustment:

Loosen screw A, push hinge arm

forwards or backwards, re-tighten

screw Aand secure screw Bwith

a 1/4 turn clockwise

Height adjustment:

Loosen screw C, adjust door

height and re-tighten screw C

Side to side adjustment:

Loosen screw A, adjust gap with

screw Band re-tighten screw A

veer WARDROBE

Made in Vietnam - r04 Page 6 of 6

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

NOTE: If you are unsure about your wall type or what mounting method you should use, consult a

qualified professional or your local hardware store.

For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe

mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete,

etc.). Mount to wood studs whenever possible.

A) Attach 2 mounting brackets to top of unit using 2 small screws per bracket.

B) Determine the final location of unit. Mark position on the wall, approximately 2" below each

mounting bracket on the back of the unit.

C) Drill a hole in the wall stud. If a wall stud is not available, drill a hole in the wall that is slightly smaller

in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the

wall.

D) Attach the mounting brackets to the wall by inserting 2 large screws through each mounting

bracket and into the wall anchor in the wall.

E) Position the unit so the mounting brackets on the back of the unit are aligned with the wall brackets.

F) Lace one end of each wall strap through corresponding brackets, and into the other end of the strap.

G) Pull the straps tightly until secure.

Wall mounting assembly is now complete.

optional wall mounting assembly

WALL

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung