CB2 Platform Coffee Table Bedienungsanleitung

Made in Vietnam - r04 Page 1 of 4

platform COFFEE TABLE

hardware

components

tools required

Thank you for purchasing the Platform Coffee Table.

This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as

the individual components

to this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

Missing hardware?

Please call 800.606.6387 for replacements.

4 - large

bolts

16 - flat

washers

phillips head screwdriver

1 - top panel

4 - drawer sides

(2 left, 2 right)

( We recommend the use of hand tools instead of power tools )

16 - spring

washers

12 - small

bolts

16 - screws 12 - cam

screws

12 - wood

dowels

12 - cams

1 - bottom panel 1 - back panel

2 - side panels

(1 left, 1 right)

2 - drawer fronts

(1 left, 1 right)

1 - partition 2 - drawer backs

2 - drawer bottoms 4 - legs 4 - brackets

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

bottom

panel

1 2

leg

bracket

bottom

panel

top panel

left side panel

right side panel

partition

large

bolt

small

bolt

NOTE: Make sure arrows

points toward nearest

edge with holes

Made in Vietnam - r04 Page 2 of 4

platform COFFEE TABLE

NOTE: Do not over

tighten the bolts

A) With the assistance of another adult, attach 4

legs to bottom panel as shown. Insert 1 small

bolt, 1 flat washer and 1 spring washer

through top panel into each leg. Secure, but do

not over tighten, the bolts with a screwdriver.

B) Secure each leg to corner brackets with 1

large bolt, 1 flat washer and 1 spring washer

as shown.

Attach 4 brackets to assembled unit as shown.

Secure each bracket with 2 small bolts, 2 flat

washers and 2 spring washers as shown.

Customer Service 800.606.6252 | Latest instructions available on www.cb2.com

Insert 6 wood dowels and 6 cam screws into

top panel and bottom panel as shown. Secure,

but do not over tighten, each cam screw with a

phillips head screwdriver.

Insert 4 cams into left/right side panel and

partition as shown. Make sure arrows on each

cam points toward nearest edge with holes.

NOTE: Do not over

tighten cam screws

Made in Vietnam - r04 Page 3 of 4

platform COFFEE TABLE

With the assistance of another adult, fit dowels

of top panel into corresponding holes of

assembled unit. Secure all cams.

Customer Service 800.606.6252 | Latest instructions available on www.cb2.com

left side

panel

right side

panel

partition

With the assistance of another adult, position unit

upright. Fit dowels of assembled unit into

corresponding holes of left/right side panels

and partition. With a screwdriver, turn each cam

clockwise until it securely engages each cam

screw.

back panel

Fit back panel into corresponding grooves of

assembled unit as shown.

top panel

Fit dowels of drawer front into corresponding

holes of drawer left and attach with 2 screws as

shown. Secure, but do not over tighten, screws

with a screwdriver.

drawer front

drawer left

NOTE: Make sure open end

of glides are positioned toward

back panel and grooves in all

panels are aligned

NOTE: Do not over

tighten the screws

drawer bottom

9 10

drawer back

drawer right

Made in Vietnam - r04 Page 4 of 4

platform COFFEE TABLE

Fit dowels of drawer assembly into

corresponding holes of drawer right and attach

with 4 screws as shown. Repeat steps 8-11 for

remaining drawer assembly.

Fit glides of drawer assembly into drawer glides

of unit. Push drawer assembly into the glides

until the drawer is all the way in. Test the drawer

by opening and closing a couple of times to

ensure it is secure.

Assembly is now complete.

NOTE: To remove drawers, fully extend the

drawer and push the lever on the right

drawer glide down and pull the lever

on the left drawer glide up while

pulling out the drawer.

left drawer

glide

right drawer

glide

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as

the unit is finished with a protective clear lacquer. It is recommended to use coasters to protect surface from heat

and water.

cleaning & care

Slide drawer bottom into corresponding

grooves of drawer assembly.

Customer Service 800.606.6252 | Latest instructions available on www.cb2.com

Fit dowels of drawer back into corresponding

holes of drawer assembly and attach with 2

screws as shown.

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung