CB2 PEZZO Bedienungsanleitung

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Made in Vietnam - r05 Page 1 of 4

pezzo

STACKING STORAGE UNIT / BENCH

assembly hardware

4 - plastic

anchors

4 - mounting

brackets

2 - wall

straps

4 - small

screws

4 - large

screws

mounting hardware

components

tools required

Thank you for purchasing the Pezzo Stacking Storage

Unit / Bench. This page lists all the contents included in

the box. Please take the time to identify the hardware as

well as the individual components to this product. As you

unpack and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are recommended to safely assemble this product. Missing hardware?

Please call 800.606.6387 for replacements.

8 - small

screws

2 - metal

plates

16 - cam

covers

2 - spring

washers

2 - flat

washers

16 - cams

2 - large

bolts

16 - cam

screws

4 - small

bolts

phillips head screwdriver

1 - top panel

(We recommend the use of hand tools instead of power tools)

2 - partitions 1 - fixed shelf

1 - bottom panel 2 - side panels 1 - leg

allen wrench (included)

(attached in side panels)

A. Fit pre-assembled dowels of fixed shelf into

corresponding holes of partitions as shown.

B. Using a screwdriver, turn each cam clock-

wise until it securely engages each cam screw.

1 2

Made in Vietnam - r05 Page 2 of 4

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

pezzo

STACKING STORAGE UNIT / BENCH

NOTE: Do not over

tighten the cam screws

A. Fit dowels of shelf assembly into corre-

sponding holes of bottom panel as shown.

Secure bottom panel with 4 small bolts, using

a screwdriver. Do not over tighten the bolts.

B. Attach center leg to bottom panel as

shown. Turn leg clockwise to secure.

A. Insert 4 cams into fixed shelf as shown.

B. Insert 2 cam screws and 2 cams into each

partition as shown, using a phillips head

screwdriver. Do not over tighten.

partition

fixed shelf

NOTE: Make sure

arrow on each

cam points toward

nearest edge with holes

fixed shelf

partition

bottom

panel

shelf

assembly

NOTE: Do not over

tighten the bolts

center

leg

Insert 2 cams and 2 cam screws into each side

panel as shown.

side panels

A. Insert 4 cams into bottom of bottom panel

as shown.

B. Fit dowels of bottom panel into correspond-

ing holes of each side panel. Secure cams. Insert 8 cam screws into top panel as shown.

5 6

A. Fit top panel onto corresponding dowels of

assembly as shown. Secure cams. At this

point, cover cams with cam covers.

B. Secure assembly with 2 large bolts, 2 spring

washers and 2 flat washers as shown, using

an allen wrench. Position unit upright.

Assembly is now complete.

Made in Vietnam - r05 Page 3 of 4

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

pezzo

STACKING STORAGE UNIT / BENCH

top panel

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do

not use abrasive cleaners.

WEIGHT LIMITATIONS

1 UNIT/MEDIA STAND: This item is able to

support up to a total of 53 lbs evenly

distributed.

1 UNIT/BENCH: This item is able to support

up to a total of 325 lbs evenly distributed.

2-3 STACKED UNITS/BOOKCASE: This item

is able to support up to 130 lbs (top surface),

37lbs (side shelves) and 55lbs (center shelves);

all evenly distributed.

For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is

essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs

whenever possible.

NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified

professional or your local hardware store.

A) Attach 2 mounting brackets to top of unit using 2 small screws per bracket.

B) Determine the final location of unit. Mark position on the wall, approximately 2" below the mounting bracket mounted to

the back of the unit.

C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the

anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall.

D) Attach 2 mounting brackets to the wall by inserting 2 large screws through each mounting bracket and into the wall

anchor in the wall.

E) Place the unit so the mounting brackets on the back edge are aligned with the wall brackets.

F) Lace one end of the wall strap through both brackets, and into the other end of the strap.

G) Pull the strap tightly until secure.

Wall mounting assembly is now complete.

Made in Vietnam - r05 Page 4 of 4

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

pezzo

STACKING STORAGE UNIT / BENCH

WALL

Stacking instructions:

Attach 2 metal plates to back of stacked book-

cases with 4 small screws per plate. Bookcases

can be stacked up to 3 bookcases high.

Please note:

- When stacking, the center support is only needed

on the bottom bookcase

- When stacking, product can only be used as a

bookcase, not a media stand

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

CB2

CB2 TRIAD Bedienungsanleitung

CB2

CB2 SHAKE TALL CHEST Bedienungsanleitung

CB2

CB2 ASTORIA Bedienungsanleitung

CB2

CB2 Platform Coffee Table Bedienungsanleitung

CB2

CB2 FRAME CANOPY Bedienungsanleitung

CB2

CB2 MEMENTO Bedienungsanleitung

CB2

CB2 OXFORD Bedienungsanleitung

CB2

CB2 THE WALL Bedienungsanleitung

CB2

CB2 Facade Bedienungsanleitung

CB2

CB2 CHARLIE Bedienungsanleitung

CB2

CB2 ASH Bedienungsanleitung

CB2

CB2 A SYMMETRIC CLOSET Bedienungsanleitung

CB2

CB2 GRID Bedienungsanleitung

CB2

CB2 STELLA Bedienungsanleitung

CB2

CB2 ACACIA Bedienungsanleitung

CB2

CB2 Rouka Bedienungsanleitung

CB2

CB2 RODNEY Bedienungsanleitung

CB2

CB2 ALBA Bedienungsanleitung

CB2

CB2 HALO Bedienungsanleitung

CB2

CB2 Slip Duck Canvas King Bed Bedienungsanleitung

CB2

CB2 Shake Nightstand Bedienungsanleitung

CB2

CB2 sova Bedienungsanleitung

CB2

CB2 Finn Lounger Bedienungsanleitung

CB2

CB2 Paradigm Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung